136,418 used machines on RESALE, but how to find them? Machine Search
material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic
pressure:300 t distance between columns:2500 mm stroke:350 mm distance table/ram, max. stroke up, adjustment up:1280 mm table surface area:2500 x 1500 mm table height over floor:850 mm side window:900 mm ram surface:2500 x 1500 mm speed down:300 mm/s speed up:240 - 450 mm/s working speed:23 - 44 mm/s oil volume:3000 l power requirement:132,0 kW weight:54,0 t Dimensions (WxDxH):3,25 x 3,2 x 4,8 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:SITEMA
nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m
pressure:300 t distance between columns:1220 mm stroke:1000 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1200 x 1000 mm pressure of drawing cushion in table:115 t stroke of drawing cushion in table:400 mm die cushion area:1100 x 860 mm table height over floor:900 mm side window:550 x 1000 mm ram surface:1200 x 1030 mm speed down:400 mm/s speed up:350 mm/s working speed:12 - 31 mm/s oil volume:1080 l power requirement:36,0 + 19,0 kW weight:22,0 t dimensions (WxDxH):2,5 x 2,5 x 6,3 m height over floor:5,4 m height beneath floor:0,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick hydraulic safety block and pump:Fabrikat Rexroth
material width coil line:600 mm coil weight in kg:2 x 3000 kg coil internal diameter:460 - 630 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm Number of Straightening rolls:9 roll diameter:30 mm material cross-cut:1200 mm² weight:9,5 t Dimensions (WxDxH):4,3 x 2,6 x 2,6 m straightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven
oven 850 t max 800 C with air circulation inner dimensions 1x1x2m (possible various size) PLC Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce ber ...
Durchlauftrockner Elektroindustrieof en Elektroöfen Erwärmungsöfen Gasöfen Gastrockner Industrieöfen Industrietrockner Kammeröfen Kammertrockenöfen GMH GussGmbH Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen gienanth Wärmeprozessöfen trompetter-guss Warmhalteofen Partner buerstlein-guss heunisch-guss swt-guss Warmluftofen Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen gienanth Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen begalom Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -b ...
Heat Treatment of A356 Aluminum Castings to T5 and T6 Hardness AMS 2750E standard Ovens Chamber Furnaces Laboratory Furnaces Industrial Furnaces Ashing Furnaces Annealing Furnaces Tube Furnaces Vacuum Furnaces Furnace heat treatment normalizing, preheating, austenitizing, pearliting, ferriting or softening. From electrically or gas heated melting furnaces, dewaxing furnaces or core drying furnaces to fully automatic annealing plants for aluminum or steal, covers professionally all applications for the foundry industry. Melting and Holding Furnaces melting furnaces Cleaning Furnace for Riser Tubes, Electrically Heated Forced Convection Furnaces Drop-Bottom Furnaces Electrically Heated or Gas Fired Quench and Tempering Plants for Steel Quench Tanks Chamber and Bogie Hearth Furnaces Catalytic and Thermal Post Combustion Systems Continuous Operation Furnaces Temperature Uniformity and Sy ...
used
All spare parts available electrically electric Dialogue 1,2,3,4 Contour 1,2,3 Dialogue 11
Number of tool positions: 30 Spindle power: 14 kW Spindle speed: 14,000 [rpm] A-axis travel: 360 [°] (+/-) Indexing accuracy: 0.001 [°] Stroke: -10 / +95 [°] Indexing accuracy: 0.001 [°] Tool Changer Type : Loader Arm Table load capacity : 350 [kg] Auction-ID: A7-32339-12
CNC vertical machining center for machining metal parts. Numerical control: Siemens Sinumerik 810D Powerline Strokes: X 640 mm / Y 600 mm / Z 500 mm Table: 850 × 600 mm Maximum table load: 600 kg Spindle taper: SK 40 (DIN 69871) Spindle speed: 1 – 8,000 rpm Fast feeds: X 70 m/min / Y 40 m/min / Z 40 m/min Tool changer: 30 positions Spindle motor power: 12 / 17 kW Energized hours: 43,000 h Operating hours: 15,000 h Note: Without tool holder Auction-ID: A1-50714-4020
Manufacturer: DMG GILDEMEISTER Year: 2008 Type: CNC lathe with motorized tools with C and Y axes Numerical control: Heidenhain iT Plus Max. turning diameter: 400 mm Max. turning length: 600 mm Distance between tips: 615 mm Main spindle: 20–6,000 rpm – 16 kW – max. torque 155 Nm Bar capacity: Ø 52 mm – spindle bore 61 mm C-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW) Strokes: X 160 mm / Z 450 mm / Y ±32 mm Fast feeds: X 60 m/min – Z 45 m/min Attachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic system Dimensions (mm): 8000 × 3000 × 2700 Weight (kg): approx. 4500 Remarks: Machine in good condition, powered on. Serial number included in the description. Auction-ID: A1-50714-4002
ul> CNC control: Heidenhain TNC 530 5-axis (B-axis head ±90°, C-axis table 360°) Strokes: X = 1060 mm, Y = 710 mm, Z = 710 mm Spindle speed: 20 – 12,000 rpm Spindle power: 15 kW Cone: ISO40 Fast feeds: 30 m/min Table: 1500 x 795 mm Max table load: 900 kg Tool magazine: 32 positions Spindle centre coolant + refrigeration unit + mist suction Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4006
Manufacturer: DMG (Deckel Maho Gildemeister) Year: 2006 Type: CNC Vertical Machining Center Numerical Control: Heidenhain TNC 530 Strokes: X 635 mm / Y 510 mm / Z 460 mm Spindle: 12,000 rpm Tool magazine: 32 positions Spindle center coolant: 20 bar Filtration: Cartridge filtration Tooling: No tooling supplied with the machine Weight (kg): approx. 6000 Notes: Multi-purpose CNC vertical machining center. Serial number included in the description. Auction-ID: A1-50714-4016
Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Cooler area: 300 x 300 mm -with: fan -Dimensions: 300/160/H360 mm -Weight: 9 kg
Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 300 x 300 mm Height: 100 mm used ! Dimensions: 300 x 300 x 100 mm
Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 300 x 300 mm Height: 100 mm used ! Dimensions: 300 x 300 x 100 mm
Welding table, straightening table, straightening plate, work table, clamping table straightening plate, leveling table,spotting plate PAGUS work surface: 300 x 300 mm height: 90 mm used, tested ! Dimensions: 300 x 300 x 90 mm
Auction-ID: A1-50076-214
Visible Model: VR 3000 Type: MIG/MAG welding equipment with wire feeder Hose reel: Fronius VR 3000 Hose reel power: 42 V DC Power consumption: 164 W Compatible Wire Diameter: 0.8-1.6mm Wire feed speed: 0 to 18 m/min Coils: standardised models up to 16 kg Max. coil diameter: 300 mm Protection rating: IP23 RV 3000 dimensions: approx. 620 × 290 × 420 mm Wire feeder weight: approx. 16 kg The machine is also equipped with a Fronius FK 3000-R cooler, which can be identified on the nameplate: Reference / Art. Nr: 4,045,887 Visible serial number: 17380823 Power supply: 230 V – 50/60 Hz Power indicated on the plate: 1.1 kW Maximum indicated power: 1.2 kW Protection rating: IP23 Liquid cooling for torch Chiller flow rate: approx. 3 L/min Liquid capacity: approx. 5.2 L Curb weight: approx. 11 kg The visible set also includes torch, wiring/hose harness and m ...
Model: M-Pro 300 (C) Type: MIG/MAG welder Manufactured: Germany Power supply: three-phase 400 V – 50/60 Hz Network Protection: 16A Welding range: 30 to 300 A Voltage range: 15.5 to 29 V Duty cycle at 40 °C: 300 A at 25% 205 A at 60% 170 A at 100% Protection rating: IP23S Standard: EN 60974 Serial No.: 0863-2520-0023-1 Indicative dimensions: approx. 880 × 400 × 755 mm Indicative weight: approx. 80 kg Compatible with steel, stainless steel and aluminum, among others; Lorch documentation indicates steel wires from 0.6 to 1.2 mm and aluminum from 1 to 1.2, it is equipped with a welding torch with cable, a ground cable with clamp and a mobile chassis on wheels. Auction-ID: A3-46133-35232
Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...
Kat-No 06-1101-1 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 620 mm in the end Height Zyl: 1000 mm Total height: 1410 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Delivery: immediately from stock. All prices are ex works plus law VAT. ...
Cat. No. 12-2070 in very good condition Material: V2A – AISI 304 (1.4301) – Surface: inside and outside 2B=IIIC Upper Bottom: With ventilation hose DN 350 With weld-on fitting centrally located on upper bottom DN 65 With T-distributor threaded connection, one side DN 25 other side DN 50 With 2 crane lugs Tank Body: With manhole lid 450x350 mm With connection flange DN 300 for agitator on the side With connector for spray ball under the agitator Lower Bottom: With outlet DN 100 centrally located On 5 adjustable feet Measurements and Weight: Length: 5450 mm Tank Body Height: 3900 mm Diameter: 3300 mm Weight: ca.3,5 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on d ...
Cat. No. 12-2945 New Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: stable stack crown Manhole lid DN 400 6 x Star Head Eye Screws 1 x Threaded welding nozzle DN 50 with blind cap 1 x Overpressure valve 1 x CO2 ventilation valve Body: 4 x Beading stiffeners Underbody: forward pulled outlet pipe DN 50 Cone floor 4 feet, very stable design with pallet truck underpassable with forklift shoes for fork holder Supplement (on request): Fermentation spandconnection DN Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. Weight 85 kg Height 1410 mm Diameter 700 mm Cylinder height 750 mm Material AISI304 (V2A) 1.4301 Test pressure 3.4 bar Construction form vertical Working pressure range +2/-0.15 b ...
56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 112 traverses -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU c ...
Attachment: Lamella separator Condition: pre-owned m³/h up to 3000 m Usage: Separation of solids and liquids by sedimentation. Lamella separator as a preliminary stage before filter presses are often used for thickening. The filter press in relation to the filter surface can be sized smaller through a thin slurry before thickening. The plant is in good condition and available for rent and for sale. Visit us at the factory is like possible agreement.
used approx. 30 m³ / 30000 litres steel tank interior coated double-walled above - ground - 2 steel base - good condition Dimensions: approx. Ø 2.00 m x about 10,00 m of the tank is coated from inside, double-walled and Get up 2 steel bases. Steel tank / container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, edible oil, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de
Hydraulic radial engine Manufacturer Denison/Calzoni Type MR300D - F1N1N2S2NX 0401 / 46529, 742056 250 bar Used from Husky injection moulding machine type GL225 RS60/50
Rotary vane vacuum pump - oillubricated Manufacturer: Leybold Type: Sogevac SV 300 Cat. No.: 10931 Status: Generalueberholt Gewast.: 12 months Including: oil filling (mineral oil), operating instructions with list of parts Voltage: 50/60Hz 230-400/460V Engine nominal: 5.5 KWfinal pressure or gasbalast: approx. 0.08 m bar Delivery time: ready for use; ready for use
Key data: 300 , 600
Rollers: dia. 300 x 600 mm Roll surface: smooth Rollers type: hollow bored NIP adjustment: Manuel Engine: 22 kW
Furrance 300c- HERAEUS T6120 Machine is in good working condition
We offer: Slats for slat curtain industry, used Dimensions: width approx. 2,000 mm x length approx. 300 mm Price per piece € 9,00 net plus 19 % VAT ex stock Harsefeld 10 pieces available. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.
Servo motor, electric motor, DC motor -Max. Speed: 3000 rpm -Power: 3.42 kW -Torque motor: 14.9 Nm -Shaft: Ø 32 x 58 mm -Construction: B5 -Dimensions: 320/138/H165 mm -Weight: 15 kg
Power supply systems, construction site emergency lighting, escape sign luminaires, escape route luminaires, emergency and escape route lighting, emergency lights, escape routes -Emergency lighting with: charger and controller and batteries -Dimensions: 630/390/H260 mm -Weight: 25 kg
Electric motor, three-phase motor -Power: 0.18 kW -Speed: 3000 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Dimensions: 290/165/H220 mm -Weight: 16.7 kg
MAJA ARTICLE NUMBER : 716-2690 PULL ROLLER FOR MAJA EVM3006 EF ,EVM 4006 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Servo motor, electric motor, DC motor -Max. speed: 3000 rpm -Power: 1.92 kW -Motor torque: 8.6 Nm -Design: B5 -Number: 2x motors available Price: per piece -Dimensions: 312/108/H138 mm -Weight: 10 kg/pc.
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Flender -Type: 2 GR200/230 -Input: 380 V 50 Hz -Output: 165 V 300 Hz -Power: 26 KVA -Dimensions: 1300/560/H380 mm -Weight: 390 kg
Electric motor, three-phase motor, electric motor -Power. 18.5 kW -Speed: approx. 3000 rpm -Shaft: Ø 42 x 105 mm -Construction: B3 -Dimensions: 640/440/H325 mm -Weight: 144 kg
Stick electrodes 2.5 x 300 -Type: P81CR -Price: per package -Number: 2 packages available -Weight per package: 1.8 kg
Stick electrodes 2.5 x 300 -Type: P83CR -Price: per package -Number: 7 packages available -Weight per package: 1.6 kg
Stick electrodes 3.2 x 300 -Type: CITOCHROMAX N -Price: per package -Number: 13 packages available -Weight per package: 2.9 kg
Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Cable with: 3000 kg load capacity -Number: 2x available -Price: per piece -Dimensions: 690/140/H370 mm -Weight: 28 kg
maximum number of results exceeded
please refine your search
75.000 € 
