dmg 300 used for sale

General SKU357X828 LocationBarneveld Main Features MaterialStainless steel Volume300 Ltr. Motor2.2 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity300 l. Vessel sizesø 800 x 700 mm Dished bottomcheck Manhole400 x 245 mm OutletDN25 With jacketcheck With anchor stirrercheck Motor2,2 kW, 220/380 V, 1410 rpm Speed mixing shaft31 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General MakeUnknown Mounted on legsOn wheels With switchgearcheck Floorspace1,10 x 1,10 m Total height1,80 m Weight400 kgMinerals & inorganicAPIBiopharmaceuticalDyes & pigmentsBeveragesSolid pharmaceuticsConfectioneryStirring vesselsOther feedAnimal feedDairyLubricants & oleoSugarFood additivesCosmeticsOther pharmaceuticsDetergent & surf.SolventsFeed additivesCatalysts & fillersPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFi ...

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3460 mm table height: 800 mm 0: 220 bar cutting angle adjustment: 0,5x3 ° down holder: 18 back stop - adjustable: 750 mm front stop - adjustable: 1000 mm main drive: 7,5 kW oil volume: 300 l total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,7x2,0x1,8 m cutting angle adjustment manually blade gap adjustment manually angle stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU437W1417 MakeMedimex LocationBarneveld TypeMED 263 Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume2 Ltr. Motor0.12 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2 l. Vessel sizesDia. 120x200 mm Dished bottomcheck Top connectionscheck With jacketcheck Max. temperature300°C With propellor stirrerwithout propellor Motor0,12 kW, 380-420 volt, 1390 rpm, (Ex) Speed mixing shaft1390rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General No.170760 Year of construction1996 Floorspace0,60x0,70 m Total height1,45 m ATEX designedcheck Extra SpecificationsVessel pneumatic movable&:nbsp:Minerals & inorganicAPIBiopharmaceuticalDyes & pigmentsBeveragesSolid pharmaceuticsConfectioneryOther feedAnimal feedDairyLubricants & oleoStainless Steel ReactorsSugarFood additivesCosm ...

cutting diameter: 255 mm dimensions of saw-band: 2750 x 27 x 0,9 mm cutting width: 200 x 320 mm cutting speed: 20 bis 80 m/min : 125 mm : 125 x 125 mm : 195 mm Impact energy: 350 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,1 x 0,8 x 1,75 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 515 mm grinding length: 3000 mm centre height: 250 mm turning speed range: 11,2 - 355 U/min quill stroke: 40 mm morse taper: 5 rapid adjustment: 70 mm spindle turning speed range: 1080 - 1860 U/min workpiece weight: max. 500 kg table speeds: 0,05 - 5 m/min total power requirement: 17 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 8,0 x 3,0 x 2,6 m Universal external cylindrical grinding machine - coolant tank & magnetic filter - feed with adjustable stop - tailstock with air bearings - workpiece spindle - various steady rests The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU025P753 MakeChemap AG LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Stainless Steel Reactor Reactorcheck Capacity300 Ltr. Vessel sizesdia. 700x800mm, Flat top side Dished bottomcheck Outletdia. 30mm With jacket(15 Ltr.) Max. temperature130°.C., Vibro stirrer With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) General No.9-2964 Year of construction1985 Floorspacedia. 0,9 m Total height2,2 m Weight500 kg Extra SpecificationsWithout controls Technical specs Extra informationFlat top sideMinerals & inorganicAPIBiopharmaceuticalDyes & pigmentsBeveragesSolid pharmaceuticsConfectioneryOther feedAnimal feedDairyLubricants & oleoStainless Steel ReactorsSugarFood additivesCo ...

Vessel manipulator ELEV 300KG, max vessel weight 300 kg

Trade fair and exhibition machine, available immediately, Dynamic checkweigher to avoid underfilling and overfilling, reducing rejects and costs., IFS - fair production control,, Thanks to the gripper infeed conveyor, it is ideal for tall containers such as round or oval plastic bottles filled with mayo, ketchup, mustard, etc., without discharge and buffer tank., Max. throughput (pieces/min): 250 (depending on product dimensions and weights), Gross weighing range = 3,750 g, Working height = 800 – 950 mm, Degree of protection: IP 65, Feeder belt: 300 x 150 mm, Weighing band: 200 x 150 mm, Discharge belt: 300 x 150 mm, Total length = approx.: 2,010 mm, 2 page clamping bands in VA with central adjustment (600 x 50 mm),, 2 knife edges on conveyer belts, Weighing belt full cover with hinged lid, 2 additional support feet for inlet and outlet belt, MID workpiece preparation, Series fault det ...

General SKU315T1252 MakeTerlet Type(unknown: missing typeplate) Mounted on legscheck Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Stirring vessel Capacity± 300 Ltr. Vessel sizesdia. 750x690 mm With covercheck Top connectionsdia. 34 mm Outletdia. 46 mm With jacketcheck With paddle stirrercheck Motor1,5 kW 380-500 Volt Speed mixing shaft10-280 rpm With jacketcheck Stirring vessels With paddle stirrercheck Specified Features - Stirring vessel MaterialStainless steel General LocationBarneveld With switch(as is) Floorspace1,4x1,4 m Total height1,5 m Weight570 kgMinerals & inorganicAPIBiopharmaceuticalDyes & pigmentsBeveragesSolid pharmaceuticsConfectioneryStirring vesselsOther feedAnimal feedDairyLubricants & oleoSugarFood additivesCosmeticsOther pharmaceuticsDetergent & surf.SolventsFeed additivesCatalysts & fillersPlast ...

Technical data for the shelf: Shelving system: Meta Type: Clip The scope of delivery includes: 01x Shelf, used Soil name: MS150-III Material colour: sendzimir galvanised Dimensions: 1,300 x 600 x 40 mm Weight: 5.11 kg|pcs. max. load per shelf 150 kg with evenly distributed load Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

turning diameter: 1000 mm turning length: 3000 mm control: Siemens 828D turning diameter over bed: 1000 mm turning diameter over slide rest: 700 mm workpiece weight: t spindle drive motor: 33,6 kW spindle turning speed range: 1 - 550 U/min centre height: 510 mm x-axis: 520 mm z-axis: 3020 mm spindle bore: 260 mm spindle nose: A2-15 tailstock quill taper MT: 5 diameter of quill: 130 mm tailstock quill stroke: 200 mm rapid travel (x and z-axis): 8 m/min total power requirement: 40 kVA weight of the machine ca.: 12,2 t dimensions of the machine ca.: 7,52 x 3,2 m - Siemens 828D CNC - C-axis - 8-station tool turret with powered tools (VDI 50), 3000 rpm - Tailstock - Powered tool holders - Chip conveyor - CE Operating hours: 2000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis Okuma LT 300 MY was manufactured in 2021, featuring a max turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 RPM and includes a motorized 12-position turret. Ideal for complex turning operations, the machine also offers rapid traverse rates and a substantial distance between centers of 1,200 mm. Consider the opportunity to buy this Okuma LT 300 MY horizontal turning machine. Contact us for more information.

This 5-axis FAMU ACTIVE FIVE 3000 was manufactured in 2010. It features extensive travels of 3000 × 1200 × 900. Notably, the electrospindle and Z axis components were replaced in March 2025, and the X axis components in 2024, ensuring enhanced reliability and performance. If you are looking to get high-quality milling capabilities consider the FAMU ACTIVE FIVE 3000 machine we have for sale. Contact us for more information about this machine.

This 4-axis DANOBAT HG 91-3000-B8 was manufactured in 2007. It features a CNC control system by SIEMENS 840 D, a maximum grinding length of 3,000 mm, and can handle workpieces up to 5,000 kg. The machine offers a swivel angle from -30º to +180º and a cutting speed of 45 m/s. Consider the opportunity to buy this DANOBAT HG 91-3000-B8 cylindrical grinding machine. Contact us for more information about this machine.

This 3-axis KOMPAS F 2030 Industry was manufactured in 2019 and features a 3000x2000mm working area. It includes an automatic Mach3 CNC control for feeding, sawing, and milling, with a maximum speed of 10,000 mm/min. The machine is equipped with a 3 kW milling motor, angle-adjustable circular saw, pneumatic clamping, and a chip extraction system. If you are looking to get high-quality milling capabilities, consider the KOMPAS F 2030 machine we have for sale. Contact us for more information.

General SKU232P229 LocationBarneveld MakeRietschle Thomas (DE) TypeSMV 300 Pressure Working pressure0.2 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume300000 Ltr. Motor7.5 KW Specified Features - Vacuum pump Pump:vacuum:: Number of pumps:1x Capacity300 m3/h With motor7,5 KW, 690/400 Volt Inletdia.60mm Outletdia.38mm MaterialMild steel General Mach.No.:manufacturing tag is missing: Year of construction+/- 2003 Floorspace1,3x0,8 M Total height0,7 M Weight250 KG Technical specs Extra informationvacuum (200 mbar abs.)Minerals & inorganicPlastic & rubberAPIBiopharmaceuticalDyes & pigmentsBeveragesSolid pharmaceuticsConfectioneryOther feedAnimal feedDairyVacuum pumpsLubricants & oleoSugarFood additivesE-waste & metalOrganicsCosmeticsOther pharmaceuticsDetergent & surf.SolventsPaper & otherFeed additivesCatalysts & fillersPlastic & polymersSpicesAgro ...

Cream separator (Skimmer) for separation of milk or whey. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, cyclone sludge tank, base plate, feet, watervalves (original Westfalia), main control cabinet with frequency converter (ABB) and control panel with Allen-Bradley SLC 5/03 CPU Processor and Allen Bradley PanelView 1000. Controls upgraded in 2008 by GEA Westfalia. Endress + Hausser Promass 83 Flowmeter., Type of Machine: Cream Separator, Capacity: 35.000 liter per hour, Bowl speed: 4.800 rpm, Motor: 45 kW - 460 V - 74 A - 1.775 rpm - 60 Hz - 3 Ph, Weight: 3.300 kg, Dimensions: 210 x 125 x 235 cm

General SKU232P230 LocationBarneveld MakeRietschle Thomas (DE) TypeSMV 300 Pressure Working pressure0.2 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume300000 Ltr. Motor7.5 KW Specified Features - Vacuum pump Pump:vacuum: Number of pumps:1x Capacity300 m3/h With motor7,5 KW, 690/400 Volt Inletdia.60mm Outletdia.38mm MaterialMild steel General Mach.No.301438950001 Year of construction+/- 2003 Floorspace1,2x0,8 M Total height0,7 M Weight250 KG Technical specs Extra informationvacuum (200 mbar abs.)Minerals & inorganicPlastic & rubberAPIBiopharmaceuticalDyes & pigmentsBeveragesSolid pharmaceuticsConfectioneryOther feedAnimal feedDairyVacuum pumpsLubricants & oleoSugarFood additivesE-waste & metalOrganicsCosmeticsOther pharmaceuticsDetergent & surf.SolventsPaper & otherFeed additivesCatalysts & fillersPlastic & polymersSpicesAgrochemicalsBiotechnol ...

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...

General SKU232P232 LocationBarneveld MakeRietschle Thomas (DE) TypeSMV 300 Pressure Working pressure0.2 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume300000 Ltr. Motor7.5 KW Specified Features - Vacuum pump Pump:vacuum: Number of pumps:1x Capacity300 m3/h With motor7,5 KW, 690/400 Volt Inletdia.60mm Outletdia.38mm MaterialMild steel General Mach.No.1024770314 Year of construction2003 Floorspace1,3x0,8 M Total height0,7 M Weight250 KG Technical specs Extra informationvacuum (200 mbar abs.)Minerals & inorganicPlastic & rubberAPIBiopharmaceuticalDyes & pigmentsBeveragesSolid pharmaceuticsConfectioneryOther feedAnimal feedDairyVacuum pumpsLubricants & oleoSugarFood additivesE-waste & metalOrganicsCosmeticsOther pharmaceuticsDetergent & surf.SolventsPaper & otherFeed additivesCatalysts & fillersPlastic & polymersSpicesAgrochemicalsBiotechnologyRub ...

General SKU262M321 Makeunknown manufacturer plate is missing Mounted on legs(verrijdbaar) Main Features MaterialStainless steel Volume300 Ltr. Motor0.75 KW Specified Features - Stirring vessel Open stirring vessel(1x) Capacity300 Ltr. Vessel sizesdia. 785x619mm Flat top sidecheck With covercheck Top connectionsdia. 20mm Outletdia. 70mm With jacketcheck With propellor stirrercheck Motor0,75 KW, 220/380 Volt (Ex) Speed mixing shaft1400 Rpm MaterialStainless steel With jacketcheck General LocationBarneveld With switch(Ex) Floorspace1,1x1,1 M Total height1,4 M Weight400 KG ATEX designedcheckMinerals & inorganicAPIBiopharmaceuticalDyes & pigmentsBeveragesSolid pharmaceuticsConfectioneryStirring vesselsOther feedAnimal feedDairyLubricants & oleoSugarFood additivesCosmeticsOther pharmaceuticsDetergent & surf.SolventsFeed additivesCatalysts & fillersPlastic & polymer ...

4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine

General SKU232P231 LocationBarneveld MakeRietschle Thomas (DE) TypeSMV 300 Pressure Working pressure0.2 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume300000 Ltr. Motor7.5 KW Specified Features - Vacuum pump Pump:vacuum: Number of pumps:1x Capacity300 m3/h Inletdia.60mm Outletdia.38mm MaterialMild steel General Year of construction+/- 2003 Floorspace1,3x0,8 M Total height0,7 M Weight250 KG Technical specs Extra informationvacuum (200mbar abs.)Minerals & inorganicPlastic & rubberAPIBiopharmaceuticalDyes & pigmentsBeveragesSolid pharmaceuticsConfectioneryOther feedAnimal feedDairyVacuum pumpsLubricants & oleoSugarFood additivesE-waste & metalOrganicsCosmeticsOther pharmaceuticsDetergent & surf.SolventsPaper & otherFeed additivesCatalysts & fillersPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine chemicalsTea, herbs & ...

used sourdough plant IsernhägerProduct descriptionManufacturer : IsernhägerCa. 300 liters sourdough stirring kettle sourdough containercompletely made of stainless steelKettle capacity approx. 300 litersDetails see pictures

General SKUR1376 LocationBarneveld MakePfeiffer Vacuum (D) Main Features Volume50000 Ltr. Motor3 KW General TypeRevoDry 50 / HRH 300 Mach.No.21136412 Year of construction2009 Mounted on wheelscheck With switchgearcheck Floorspace1,1x0,7 M Total height1,6 M Weight325 Kg Extra SpecificationsPfeiffer vacuum pumping station with TRH 261 turbo pump and RevoDry dry vacuum pumpMinerals & inorganicPlastic & rubberAPIBiopharmaceuticalDyes & pigmentsBeveragesSolid pharmaceuticsConfectioneryOther feedAnimal feedDairyVacuum pumpsLubricants & oleoSugarFood additivesE-waste & metalOrganicsCosmeticsOther pharmaceuticsDetergent & surf.SolventsPaper & otherFeed additivesCatalysts & fillersPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine chemicalsTea, herbs & coffeeOintmentsGeneric medicinesPowdered foodsPaints & coatingsConsumer wasteOils & fatPfeifferIndu ...

used sourdough plant Isernhäger B 300Â Product descriptionManufacturer : IsernhägerType : B 300Sourdough stirring kettle Sourdough containerIsernHäger the baking culturecompletely in stainless steelKettle capacity 300 liters Mobile on rollsDetails see pictures.

Elec: 230V / 50Hz , Weight: 150 kg, Minimum weight maximum weight (g): maxi 300gr, Pack mn: 100 / min, Minimum Maximum Temperature: +5°C - 40°C, e: 0,1g, Min max weight (g): max 300g, Cadence: m/min: 27 m /mn, Direction of transfer: from left to right, Minimum maximum weight (g): max 300gr, Minimum maximum temperature: +5°C - 40°C, Pack min: 100 / min, Min pack: 100 / min, Transfer direction: from left to right, Min max temperature: +5°C - 40°C, Cadence: m / min: 27m/min

Corrugated woodâ€" Rolling pin - rolling pin with wooden handles 300 mm( 2 pieces )Solid beech wood heavy-duty professional qualityRoller width: 300 mmDiameter: 90 mmWeight: 1720 gWith smooth-running stainless steel ball bearingsDetails see picture

Optical measuring machine manufactured in 2009. This TESA visio 300 dcc features a measuring range of 300 mm in the X-axis, 200 mm in the Y-axis, and 200 mm in the Z-axis. It includes a high-resolution CCD camera and interchangeable zoom optics for enhanced measurement capabilities. If you are looking to get high-quality optical measurement capabilities, consider the TESA visio 300 dcc machine we have for sale. Contact us for further details.

Cake ring made of aluminium à ̃ x H: 300 x 60 mm NEW( 10 pieces )Dimensions: à ̃ x H: 300 x 60 mmMaterial thickness: 2.0 mm

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.

Key data: 46 mm, 3250 mm

Year of construction 2014 Single-channel charging magazine with Vulkollan channel Remnant output into the machine room Servo drive Glass wrapping and axial displacement 1 guide channel set Vulkollan up to max. LW 46 mm incl. material slider with high-performance oil flow PLC control, integrated terminal with touch screen Manually adjustable material separation Loading area: 3250 x 370 mm Good condition

This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details.

VOUMARD Model: CNC 300 Condition: Excellent Year: 2007 Machine type: BU 1000 T L7400 Was recently removed from power due to routine upgrades and was making good parts with full functionality. Siemens 840D CNC Control. Manuals included. Has grinding capability for: Internal diameters External diameters Front faces Back faces Internal tapers External tapers Profiles Drive spigots Face keyways Cams Bilobes and trilobes Internal threads External threads Bearing tracks Travels Display .0001degrees or .0001mm A - 360 degrees - 34 t/min B - -20/+1 degrees - 240 degree/min C- 360 degrees - 500 t/min U- 300mm - 20 m/min X - 300mm - 20 m/min Z travel - 1000mm - 20 m/min 4 position turret Workhead Through Bore - 50mm Rotation Speed - 850 Max workpiece weight - 200 daN at 100 mm from flange Taper - metric 70 Weight - 8000kg

Key data: 300 t

300 T Gantry Straightening Press – Gantry Press – 3,000 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic gantry press with a pressing force of 300 t for straightening, assembly and machining processes on large-format components. Base price: 102.000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with T-slots according to DIN 650 75 mm table top Servo hydraulic ...

Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine.

Key data: 300 t

300 T Gantry Straightening Press – Gantry Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic gantry press with a pressing force of 300 t for straightening, assembly and machining processes on large-format components. Base price: 142.000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with T-slots according to DIN 650 75 mm table top Servo hydraulic ...

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

The GRUNWALD Foodliner 3000/2 is a proven, fully automatic Filling and capping machine for cups , designed specifically for hygienic food production., Performance: up to about 50 strokes per minute, Formats: LARGE oval, small oval, spit, Mövenpick, 95-round, Cutting rotor agitator, servo-operated dosing, headspace flushing, sealing via seal cylinder, clamshell cap setter via cam disc, ---------------------------------------------------------------, Your advantages with the GRUNWALD Foodliner 3000/2, ✔️ Up to 50 strokes per minute, ✔️ Integrated dosing station with servo-controlled filling, ✔️ Seal cap support and heat sealing station, ✔️ Optional MAP-capable (headspace flashing), ✔️ Reversible lid station, ✔️ Robust stainless steel version, ✔️ Suitable for wet operations, ✔️ Compact design (approx. 7.6 m length), This Cup filling and closing machine it is ...

B&A REF: 9272 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC

Key data: 3

Volume flow 300 (50 Hz) / 360 (60 Hz). m³/h Pressure difference approx. +240 to +260 mbar (50 Hz). Engine power 3.0 kW (50 Hz) / 3.6 kW (60 Hz). Speed approx. 2850 (50 Hz) / 3370 (60 Hz). Current consumption (50 Hz) 15.9 A () / 9.20 A (Y). Degree of protection IP55 (standard, see type protection). Voltage 200 - 480 V Weight 53 kg

A fully automatic cup filler for buckets is available. Design: rotary machine, lanes: 1, filling capacity: approx. 3000 cups/h, filling volume: 850ml/1000ml. The control system and the servo systems of the machine were dismantled and are missing. Documentation available. An on-site inspection is possible.

Offer 26041 Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 180 mm - Top height with base approx. 810 mm - Thickness of the top plate approx. 115 mm - 11 T-slots in table surface length 1500 mm - Center distance of the T-slots in the table surface 250 mm each - T - groove width approx. 40 / 22 mm - T - groove depth approx. 16 / 24 mm - Space requirements L 3500 x D 2500 x H 1100 mm - Weight approx. 4500 kg

Sourdough plant Isernhäger 300 ASB used Product descriptionManufacturer : Ritter / IsernhägerType : 300 ASBSower dough stirring kettle sourdough containerIsernhäger the baking culturecompletely in stainless steelKettle capacity 300 litersDetails see pictures

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

Dough processing table Treadmill work table without belt 300x122x95cm â Product description • Condition: used, baker's condition • Material: wooden work table, legs made of stainless steel • without belts • on wheels, mobile • Belt depth 31 cm • External dimensions: 300x122x95 cm (WxDxH) Details see pictures

Dough divider/weigher 1 chamber machine Weight ranges: approx. 100 - 1,100 g/piece with digital control with lubrication with extended hopper for approx. 200kg dough

A horizontal ploughshare mixer Gebrüder Lödige is available. Total volume: 300l, usable volume: 225l, mixing chamber diameter: 640mm, mixing chamber length: 1000mm, inlet opening diameter: 250mm, ground clearance: 800mm, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 500kg. An on-site inspection is possible. Expected to be available 2026.

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 210 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 15 kg / pc.