dmg 300 used for sale

Pressure: 14 bar Motor: 2,62 kW Free air delivery: 30 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 264 kg Compressed air connection: 2 1/2

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

DIONEX / Thermo Scientific UltiMate 3000 Modular HPLC System For sale is a used Dionex UltiMate 3000 HPLC system from company laboratory stock. System configuration: LPG-3400A Quaternary HPLC Pump P/N 5035.0015 S/N 8007447 Date of manufacture 28.01.2008 WPS-3000TSL Analytical Autosampler, Thermostatized P/N 5822.0020 S/N 8007417 Date of manufacture 24.01.2008 TCC-3000 Column Compartment / Column Thermostat P/N 5722.0000 S/N 8007205 Date of manufacture 15.01.2008 DAD-3000 Diode Array Detector P/N 5082.0010 S/N 8017954 Date of manufacture 17.06.2009 SR-3000 Solvent Rack P/N 5035.9200 S/N 8007489 Date of manufacture 29.01.2008 Technical features: Quaternary Low Pressure Gradient Pump thermostatized autosampler thermostatized column compartment Diode array detector Modular design Condition: The system was not fully commissioned again after decommissioning. ...

2005 STRIKO WESTOFEN MH I-2 3000/2000 Charging system Oven Technical data: See pictures Find more here - .ucymachines/ Contact us at - sales@ucymachines

Two identical screen printing machines are available, max. frame dimensions: 750x1100mm, compressed air connection: 8bar, indexer connected load: 2.5kW, squeegee connected load: 0.6kW, an on-site inspection is possible.

X-axis: 300mm, Y-axis: 200mm, Z-axis: 200mm, max. table load: 20kg, temperature gradient: 2K/h, relative humidity: 40-70%, length: 750mm, width: 737mm, height: 1664mm, weight: 260kg, operating hours: approx. 100h, with documentation, regularly serviced and inspected by the manufacturer. An on-site inspection is possible.

Manufacturer MORI SEIKI Model NL3000/3000 Year 2.008 CNC MORI SEIKI MSX-850III Capabilities and advances Max. turning on bed 995 mm. Max. turning on transverse carriage 825 mm. Maximum turnable diameter 420 mm Maximum turnable length 3,123 mm. Distance between points 3,200 mm. X-axis travels 280 Z-axis travel 3,170 mm. Fast Forward X-Axis, Z 30.0000 mm/min Head Nose head JIS A2-8 Maximum head speed 3,000 rpm Rod pitch head 105 mm. Axle diameter in the front bearing 160 mm. Main motor power 28 kW Maximum torque 3,365 Nm Turret No. Turret 12 Positions Maximum square tool size 25 mm Bored bar diameter 50 mm. Turret indexing time 0.3 s Counterpoint Tailstock travel 3,164 mm Tailstock shank diameter 150 mm Tailstock shaft course 150 mm MT5 tailstock cone Equipment 3 Claws Hydraulic Plate Ø 400 mm INCLUDED Chainring type SCHUNK THW 400-120 Quick C ...

This TRUMPF TruPunch 3000 CNC punching machine was manufactured in 2013. It features a working area of 2500 mm x 1250 mm and a maximum punching force of 180 kN. The machine is equipped with 18 tool stations and offers a maximum punching rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details.

Number of axes: 3, control: FANUC, connected load: 10kVA, weight: 3.7t, an on-site inspection is possible.

Sourdough mixer Kitzinger Sourmat 300 - Stainless steel sourdough stirrer - Kitzinger - Type: Sourmat 300 - 400 volts - with drain tap - on castors - Shell inner diameter: 72.5cm - Shell height inside: 64.5cm

working area: mm speed: m/min Bar length: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Specifications: Maximum cutting width: 3050 mm Maximum cutting capacity steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 3500 x 2500 x 2050 mm Weight: approx. 9,5 tons

Dematic conveyor system Accumulating roller3000-600-540 RA2361/61.1 Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 3000 mm Condition: good (used) Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Accumulation slot size: 625 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 62,5 mm Wheel diameter: 50 mm Partly rubberized for more grip when braking Drive module RA2361: Drive types: SEW geared motor Conveying speed: approx. 0.5 m/s Electrical data: 380-400V kW depending on total length The extension module always requires a drive module! Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides element length can be shortened up to 3m Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good ( ...

This 5-axis Graziano GT 300 was manufactured in 1998. It features a maximum turning diameter of 230 mm and a distance between centers of 590 mm. The machine is equipped with a tool turret that has 12 positions and driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Graziano GT 300 horizontal turning machine we have for sale. Contact us for further details.

Specifications: Working length: 3000 mm Bending capacity steel: 6.0 mm Bending angle adjustment : 0 – 180° Upper beam opening: 300 mm Power: 7.5 kW Dimensions (length x width x height): approx. 4500 x 1850 x 2200 mm Weight: approx. 5 to

A converted fully automatic strapping machine with a pressing function is being sold. This was converted by us to a GS-41 unit. This not only makes the machine 2.5sec/strapping faster, but also gives a fast E-part delivery. About the GS-41: Dimensions: 519x280x480mm Weight: 71 kg Power connection: 400V/3ph/50Hz Control voltage: 24V/DC Power requirement: 1kW Welding: Vibration welding Welding time: approx. 0.5-1.8sec Clamping time: approx. 0.5-max. Belt type: PP and PET Band width: 10mm-16mm Band thickness: 0.5-1.0mm The control system has also been adapted, and now there is a Siemens S7-1200 in it. The plant has not yet made 20,000 strappings! The machine hourly rate is only 50% compared to a new machine! If I have aroused your interest, please do not hesitate to contact us.

Professional-quality enclosed fibre laser marking machine, designed for high-precision, permanent marking and engraving of metals, plastics and other suitable materials. Ideal for manufacturers, engineering companies, jewellers, toolmakers, product manufacturers, sign/engraving businesses and anyone requiring professional industrial laser marking. Machine Features Trotec SpeedMarker 300 Industrial fibre laser marking system Fully enclosed Class 2 laser safety system Suitable for marking and engraving metals and plastics Professional Trotec SpeedMark software Suitable for serial numbers, barcodes, QR/Data Matrix codes, logos, text and product identification Can process individual components as well as larger production batches Suitable for materials including stainless steel, aluminium, brass, precious metals and various plastics Air-cooled, maintenance-free fibre laser sys ...

Specifications: Working length: 3050 mm Max. bending power: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Bend: 25.0 mm Diameter upper roller: 460 mm Diameter lower roller: 460 mm Number of driven rollers: 3 hydraulic snap roller bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore low space requirement Parts of the hydraulics installed under the machine

Hydraulic 4-Column Press manufactured in 1968. This Müller SE 300-25.1.1 is designed for metal pressing applications, featuring a stopping time of 89 ms and a stopping distance of 75 mm. If you are looking to get high-quality metal forming capabilities, consider the Müller SE 300-25.1.1 machine we have for sale. Contact us for further details.

Specifications: Working length: 3050 mm Distance between stands: 2690 mm Pressing force: 130 tons CNC Control: DELEM DA69 adjustable back gauge Controlled axes: Y1 / Y2; X; R; Z1 / Z2 CNC Table Bending Compensation MODUFIX clamping hydr. Tool clamping at the top and bottom Pneumatic tool displacement Angle measuring system Stroke: 365 mm Projection : 410 mm 2 pcs bending aids Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight : approx. 13 tons Accessories: Tool Condition: good condition

Low mileage, Refrigerant R134a GWP 1430, Capacity 1475 g, Cooling capacity 3 kW at 20 °C and 32 °C ambient temperature, Connection voltage 400 V - 50 Hz, Current consumption max 5 A, Condenser: air-cooled, Dimensions: 480 x 400 x 800 mm, Weight: 60 kg Accessories: retaining plate for fastening,

Fully automatic continuous system, 30cm belt width with hold-down belt and additional belt insert with turning station Frying length 2.35m with digital control for 7 different programs Bandgesch, adjustable mobile with fully automatic quark ball station with additional jolting for wreaths mobile tested and cleaned Immediately available from stock

A Spinner CNC lathe in need of repair is offered. Control: FANUC Series 31i-A, spindle operating hours: approx. 36824h. The lower turret is locked but incorrectly indicates unlocked status. A broken spring is suspected as the cause. Documentation available. Inspection by appointment possible.

Kaeser compressed air tank 3000 liters approx. 3 meters high

Max. Pitch circle diameter External gearing: 300 mm Max. Pitch circle diameter internal gearing: 300 mm Max. Outer diameter of workpiece (equipment): 450 mm max. module: 6 gear hobbing width -max.: 100 mm Max. Helix angle (with tool Ø 125 mm): +/- 45 ° strokes - infinitely variable: 130 - 1300 Hub/min workpiece weight: 1000 kg Minimum distance table top - tool spindle: -55 / +300 mm Maximum distance table top - tool spindle: 200 mm Maximum distance table top - tool spindle: 350 mm Manual Upright side shift: +/- 25 mm Manual swivelling angle of the tool spindle: +/- 0,5 ° Max. Tool speed: 15 UpM Max. Workpiece speed: 27 UpM Max. Tool diameter: 7 Zoll voltage: 400 V frequency: 50 Hz Max. Line power: 70 A total power requirement: 48 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 4,27 x 3,11 x 2,87 m control: Siemens Sinumerik 840 C table hole: 40 mm taper in main spind ...

: 0460 mm : 1500 mm : : 230 mm : 78 mm : 400 mm : 2200 U/min : D1-8 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 2,5/2,8 KW rated current: 7,0 Ampere output voltage: 1 x 230V / 1 x 400V V tank capacity: 15 l engine output: 6,5 HP weight of the machine ca.: 55 Kg dimensions of the machine ca.: 0,61 x 0,54 x 0,47 m The WMT SL 3000 is a powerful and reliable 2.8 KW generator. A durable and energy efficient 4-stroke engine with 6.5 hp reliable backup power for the home, office or small workshop. Outputs: 1 x 230 volt/ 1 phase Schuko socket 1 x 400 volt/ 3-phase CEE socket 1 x 12 volt (8.3A) DC output. RCA plug Pack size 610 x 540 x 470mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tetra Pak Aseptic Homogenizer 300 – Factory New (2024) High-performance aseptic homogenizer designed for advanced liquid food processing. The Tetra Pak Aseptic Homogenizer 300 delivers exceptional reliability, precision engineering, and high production capacity for demanding industrial applications. Built in 2024 and in factory-new condition, this machine has 0 working hours and has never been installed in production, making it an ideal solution for processors seeking modern aseptic homogenization technology. General Information - Manufacturer: Tetra Pak - Model: Aseptic Homogenizer 300 - Year of Manufacture: 2024 - Condition: Factory new - Working Hours: 0 hours (never installed) Technical Specifications - Maximum Capacity: 12,960 L/h - Working Pressure: 250 bar - Number of Pistons: 3 - Piston Diameter: 63 mm - Valve Design: Mushroom type with stainless steel sea ...

Heavy Duty Four-Sided Combined Calibration Milling Planer with Additional Scoring Saw for Relief Grooves Detailed technical description in the PDF document (as an attachment in the photo gallery).

TOS BUC 63A/3000 Cylindrical Grinding Machine Grinding Diameter 630 mm Grinding Length 3000 mm Height of centers 315 mm Workpiece Weight 2500 Kg Max. Grinding wheel dimensions 750 x 100 x 305 mm Spindle Speed 840/970 rpm Workpiece Spindle Speed 8 - 315 rpm Grinding support stroke 90 / 280 mm Table Speed: Variable - from 0.01 to 3.6 m / min Grinding Head Swivel 90 Degree Table Swivel +/- 5 Degree Work Head Tilts from 90 taper - Morse 6 Spindle Drive 15 KW Machine Dimensions 10000 x 3400 x 2000 mm Machine Weight 13.7 Ton Machine weight approx. 12 t Space requirement approx. 12 x 4.3 x 1.9 m Total power input 22 kW

gebr. Aerial work platform telescopic, mobile, battery-operated, with boom - Lifting height: approx. 9 meters - Load capacity: 125 kg - Working height: 11 meters - Platform size: approx. 650 x 650 mm - Battery: without battery - Charger: R 8/12 - Dimensions (folded): 1700 x 700 x 2800 mm - Support (LxW): approx. 1900 x 1800 mm - Number of masts: 1 - Engine power: 0.8 kwh Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Payload max. approx.: 125 kg ext. Length approx.: 9 m Machine weight: 350 kg Total Power Requirement: Battery Colour: blue

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Mobile extraction Brand: Riedex Type: DM 300 New machine Technical data: - Motor power 7,5 kW - Nominal volume flow 5089 m³/h - max. volume flow 6000 m³/h - 31,8 m² filter surface - motorised cleaning - Residual dust content

Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electric e ...

300 litre stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. With agitation, jacket and electrical panels. Motor characteristics: 43.19 kw at 50 Hz 400 V

Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg

Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,

Used heating container from our own plant construction, optionally with oil or gas firing, ideal for failure prevention or bridging in the high output range (e.g. industry, residential complexes, etc.), integrated heating oil tank.

ATEX calibrator disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2011 ENGINE 1 TECHTOP 5,5 kW 50 Hz 975 rpm Equipment configuration ATEX Condition As is Made by BACHILLER

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2004 ENGINE 1 FIMM 4PE80 B 0,75 kW 50 Hz 1990 rpm Condition As is Made by BACHILLER

chucking diameter: 230 mm : 400 mm Axis: 2-Achsen Schwenkbar weight of the machine ca.: 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 65 mm

CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

Key data: 240 KW, 300 kVA

The Electroquell 300 kVA (240 kW) is an advanced generator for demanding users. Thanks to the Ricardo motor, it offers an environmentally friendly and efficient power supply. Ricardo Motor ComAp IL-NT AMF25 controller Brushless alternator Drip pan Weatherproof housing Power: 300 kVA / 240 kW Voltage: 400 V approx. 433 A Fuel tank with expansion option Additional options: remote control, enlarged tank, service packages Warranty: up to 60 months

Used stainles steel mixer with dispersing agitator, capacity: 3000 liters.

Control Siemens ... Sinumerik 840 D Max.workpiece diameter ... 3200mm Turntable diameter ... 3000mm Max.table load... 14000kg Max. workpiece height ... 2200mm Axis Z ... 1155mm Max. workpiece weight ... 14000 kg Main engine power ... 81 kW Floor space... DXŠXV 7200x6400x6600mm The machine is in very good condition,

FAS roller conveyors 3000-710-650 RA2403 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: good (used) Conveying length in mm: 3000, 5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000, 16000, 17000, 18000, 19000, 20000, 21000 Nominal / outsi ...

FAS roller conveyors 3000-510-450 RA2402 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 2000, 3000, 5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000, 16000, 17000, 18000, 19000, 21000 Nominal / outsid ...