136,736 used machines on RESALE, but how to find them? Machine Search
Automatic stretch-banding machine incl. linear blister feeder, blister grouping and counting device and banding unit. Control system: SIEMENS, type Simatic S7-300
Servo drives from Indramat KDS 1.1-100-300-W1
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Quantity: 5 available -Weight: 0.6 kg
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 6 mm -Price: per piece -Quantity: 6 available -Weight: 0.8 kg
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 8 available -Weight: 0.6 kg
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 8 available -Weight: 0.6 kg
300 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6.5 m Depth 110 cm, blue Beam length 2.7 m orange Carrier with ballast /compartment 3050 kg, Negotiation price: € 52.490,-- net from stock Offer consists of: + 126 pcs. frame pre-assembled, depth 110 cm, height 6.5 m + 750 racks, length 2.7 m, 3050 kg ballast/compartment +1500 pcs Suspension locks + 504 pcs concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. ...
Pulling head, pipe assembly device -Internal threads need to be reworked -with electrical measuring connection -Dimensions: Ø 300/1050 mm -Weight: 215 kg
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
Console, device, clamping angle, clamping table, clamping plate, support console -Support consoles: 2 pieces, from press brake Promecam STPC 250 40 121 -Support table extension: adjustable in height -Dimensions: 515/300/H785 mm -Transport dimension: 840/540/H310 mm -Total weight: 56 kg
Machine vise, heavy duty vise, drill press vise -Machine vise: rotatable -Clamping jaws 200 x 40 mm -Clamping depth: 300 mm -Dimensions: 630/325/H200 mm -Weight: 82 kg
We offer: Used collision protection corners 10 pieces, approx. 400 mm 22 pieces, approx. 300 mm at the warehouse 21698 Harsefeld. Per piece € 17,00 net plus 19 % VAT ex stock 21698 Harsefeld. Price only valid while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT shown.
We sell a tape rounder from Gostol Gopan. The effective path is over 3m ! The machine is overhauled.
Power converter, power converter, controller, inverter, inverter, solar power converter -Manufacturer: SMA, Sunny Boy Photovoltaic Inverter -Type: SB 3300TL HC -PAC nom: 3000W -Dimensions: 470/205/H495 mm -Weight: 26.7 kg
Dirt traps, flanged dirt traps, filters, coarse or fine sieves, coarse filters, water filters -Manufacturer: AW Armaturen Wolff, Coarse filter, corner shape -Type: AW 603.0 PN 2.5 DN 300 GG25 603300 -Sieve plate, mesh size: Ø 2mm, material: stainless steel -Dimensions: 700/50/H533 mm -Weight: 163 kg
5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED
Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle
Capacity up to 6 tons For more details contact with us
Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo -Hydraulic fitting: T-distributor 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.
Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, -Hydraulic screw connection: size 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 15x hydraulic screw connection available -Price per piece -Total dimensions: 105/26/H114 mm -Weight: 1.2 kg/pc.
Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimension: 330/260/H140 mm -Weight: 1.3 kg
SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - control panel - automatic loader - Maximum working length 300 mm - min / max working diameter 8/80 mm - working stations: automatic loader turning with n. 2 gouges (roughing + finishing) 1° shaped knife 2° shaped knife unloading
Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg
Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg
clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm -Weight: 5220 kg
Inv. Num. : 4567 Type: 300-50 Producer: DEMAT Created: 2016 Parameters: Power consumption: 4.5 kVA Control cabinet / socket cover: IP 54 / IP 44 Length of conveyor: 2400 mm Conveying speed: 2 m/min Belt width: 250 mm Coil window size: 320 x 320 mm Weight: 180 kg
Key data: 4 mm, 80 , 20
Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).
Pipe grab, round grab, laying clamp, round material grab, scissor grab -Manufacturer: Tigrip, round material gripper type TRU 15/300 -Grip width: 80 to 300 mm -Load capacity: 1.5 tons -Number: 2x grippers available -Price: per piece -Dimensions: 700/220/H500 mm -Weight: 25 kg/pc.
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 8 grooves SPC 300 8 -V-belt width: 22 mm -Receptacle: Ø132/145 mm for taper clamping bush TB 4040 (can be changed) -Dimensions: Ø300 x 215 mm -Weight: 44 kg
Magnetic chuck, permanent magnetic round chuck, magnetic clamp, magnetic chuck -Magnetic chuck: Permanent magnetic round chuck chuck size Ø 305 mm -Hole circle: Ø 170 mm -Receptacle: short cone 8 / cone 135 - 139 mm -Weight: 54 kg
Key data: 340 mm, 1000 mm, 5000 1/min
Control: OSP-P200 Turning length: 1,000 mm Turning diameter: 340 mm Vibration diameter above bed 580 mm Speed: 45 – 5,000 rpm Tool turret 12 places (driven) Bar passage 80 mm Direct recording: BMT 60 Equipment: - One touch IGF -Conveyor - Touchsetter - 3-jaw chuck (SMW 315 HB) passage 85 mm - NC tailstock - Multilingual control - Coolant pump 8 bar
Spiral seal, labyrinth housing seal, flange seal -Manufacturer: ISW, spiral seal: flange seal 5 pieces/package -Type: 4 Class 300 lbs like Spiraltherm 304SS with inner and outer ring -Quantity: 4 packages available -Price: per package -Dimension package: Ø180 x 30 mm -Weight: 1.8kg/package
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg
Door closer, floor door closer, closing mechanism -Manufacturer: Geze, Pendulo C door closer, unused -Function: Swing door 90 DEGREE - only locks at 0 degrees - 90 DEGREE -Art.No.: 3000-002336 H06-14-00-00 -Number: 44 door closers available -Price: per piece -Dimensions: 315/45/H65 mm -Weight: 1.3 kg
Key data: 5 , 230 mm, 130 mm
I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.
Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg
Gearbox, spur gear, worm gear -Gearbox: Flat gearbox, unfortunately without type designation -Part No.: R 8 395-2 -Translation: 2-stage 1:8 / 1:2 counter-rotating -Shaft: Ø 45 x 55 mm / Ø 20 x 22 and 25 x 75 mm -Dimensions: 550/270/300 mm -Weight: 40 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hawe, hydraulic cylinder type PS 30/20 Z1143 -Stroke: 300 mm -Piston rod: Ø 20 mm -Hole: Ø 20 mm / distance 530 mm -Number: 1x cylinder available -Dimensions: Ø 62 x 570 mm -Weight: 4.9 kg
Key data: 3000 mm, 8 mm
Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limitation Knife sharpened Weight: 6,800 kg
John Deere 1505 Series II implement carrier, 4 cyl. diesel engine 31 kw/42hp all-wheel drive, continuously variable hydrostatic drive, differential lock, adjustable steering column, cab with air conditioning (function not tested), comfort driver's seat air suspension, data confirmation DEKRA for ABE available. Equipment: None Optionally available: Schell front sickle mower FSM 3000H (rear discharge) Working width 300 cm (middle 180 cm + sides 60 cm each) Side mowers can be moved up / down by approx. 12 cm, automatic switching on and off of the side mowers when lowered/raised. Height adjustment from approx. 25mm to 110mm Sliding plate under the blade as collision protection 4 support rollers in the mower housings and front in the middle as anti-scalping rollers Extras: 3 casters Identical machine with front mower Fastback Commercial 118 (3 m) for sale as well as other mowing ...
Offer 24083 Specifications: - Capacity 300 L - Load capacity up to 750 kg - Drive-in pockets for forklifts -Tilt - Drain tap for draining liquids - Mobile base frame with 2 swivel castors - Space requirement W 1500 x D 750 x H 1250 mm - Weight approx. 220 kg
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-3000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
Mixers for plastic granules and powdered products. Completely in stainless steel. Mixing motor 4 KW. Mixing chamber with separator on load cells. Pre-tank on load cells. Vacuum pump AZO 4 kW.
recessed light, LED spot -Manufacturer: SBF, recessed luminaire LED spot 110V/2W/3000K -Type: A1001628 -Connection: LED connector -Quantity: 1x light available -Dimensions: 100/90/H40 mm -Weight: 0.2 kg
recessed light, LED spot -Manufacturer: SBF, recessed luminaire LED spot 110V/5W/3000K -Type: A1000573 -Connection: LED connector -Quantity: 1x light available -Dimensions: 100/90/H40 mm -Weight: 0.2 kg
depth gauge, depth caliper, caliper, depth caliper -Manufacturer: CSE Inox, depth caliper -Measuring range: 0-300 mm -Vernier: 0.05 mm -Dimensions: 360/160/H10 mm -Weight: 0.3 kg
V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPA 300 4 3020 -V-belt width: 13 mm -Hole: Ø 55 x 50 mm taper bushing 3020 (can be replaced) -Dimensions: Ø 300 x 65 mm -Weight: 14.1 kg
Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg
maximum number of results exceeded
please refine your search
