dmc 635 used for sale

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

Dr. Boy 90A Closing unit Clamping force [kN] 900 Dimensions of mounting plates (hxv) [mm] 610 x 635 Clearance between columns (hxv) [mm] 360 x 430 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 48 Injection volume [cm3] 262 Injection weight [g] 238 Injection pressure [bar] 1320 Dimensions and weight Net weight with control cabinet [t] 3.1 Dimensions (L x W x H) [m] 3.9 x 1.4 x 1.8

Agilista 3200W 3D printer from 2019 for sale. Accessories: Accessories: Modeling Studio Software, Support Material Removal Container, Maintenance Tools, Cleaning Kit. Device is ready for use, requires maintenance., Installation space (x,y,z): 297 x 210 x 200 mm, printing technology: Multijet technology, Layer thickness: 20µ, 15µ, resolution xy: 635 x 400 DPI, equipment: Software, cable, heat bath, file formats: STL, network connection: Ethernet, mass: 188 kg, Dimensions: 1360 x 944 x 700 mm (H x W x D), mains voltage: 100 - 240V, 50/60Hz,single phase, max. 750 VA, Legal regulations: CE approval mark, Installation: 2015, Accessories post processing: On demand, Net installation space for models: 297 x 210 x 200 mm, printheads: 1 piece, Interface: Modeling Studio, software: Windows 32Bit / 64Bit, printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing  ...

x-travel: 780 mm y-travel: 560 mm z-travel: 560 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: SK 40 : (150° (-120/+30)° pallet changer:: Number of pallet-stations: 4+1 pos. size of pallet: 630 x 500 mm max. load: 400 kg T-slots: 5x 14 x 100 rotary table: 360 ° tool magazin:: number of toolpositions: 120 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8 kg feeds:: rapid traverse ( X / Y / Z ): 50 m/min feed speeds: 20 - 15.000 mm/min measuring system resolution capability: 0,001 mm total power requirement: 61 kVA weight of the machine ca.: 12,0 t dimensions of the machine ca.: 6,0 x 6,0 x 2,8 m Documents: Chip conveyor: Coolantsystem: through spindle coolant: 40 bar Tool Magazine:  ...

Description: serial no.: 14565616324 operating voltage: 400 V frequency: 50 HZ connected load: 19 kVA nominal current 35 A internal coolant unit, 40 bar motor drive power 40% DC: 14,5 kW, nominal power 100%: 11,5 kW max. spindle torque value 40% DC: 121 Nm, nominal torque value 100% DC: 84 Nm path measuring system resolution X, Y and Z-axis: 0,01 µm distance between T-slots: 100 mm number of clamping slots/size: 4 / 14H12 slot/size: 1 / 14H7 max. table load: 800 kg delivery height (floor-upper edge of table): 800 mm inclusive chip conveyor and coolant unit ,of manufacturer KNOLL read off spindle hours: 22322 h attention: without clamping element on table transport width: 2300 mm see also video z-motion: 475 mm, x-motion: 650 mm, y-motion: 520 mm, control: SIEMENS CELOS ERGOLINE, table surface area l x w : 960 x 570 mm, taper: SK 40, toolchanger positions: 20, tur ...

SECOND-HAND WIDE BELT SANDING MACHINE DMC MOD. TECHNOSAND TC 1100M3 DA MM. 1100 - CE RULES - rubber roller - 18.5 kw - 90 sh - diam. 250 mm - rubber roller - 15.0 kw - 70 sh - diam. 250 mm. - rubber roller - 11.1 kw - 40 sh - diam. 330 mm - n. 3 indipendent motors - working width 1100 mm - device for short pieces - year 2005

very good condition year 2007, with SELCA 4040D X 1350 Y 675 Z 635 Refrigeration attr. spindle, ZF RANGE CHANGE, 10000 rpm, 24 tools, BT 40, chip conveyor, Z axis gas balancing, cooling of X Y Z screws and spindle with conditioning unit, weight 7500 KG, transport dimensions 2500 mm.

Inv. Num. : 6912 Type: DMC 80H Producer: DECKEL MAHO Created: 1999 Parameters: Control system: Siemens SINUMERIK 840 D Number of stacking positions: 40 pieces Speed: 6000 1/min Number of synchronized axes: 4 pieces X-axis travel: 900 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Cone: SK 50 Machine weight: 13500 kg Equipment: Technical Documentation High Pressure Pump Conveyor Axis B 2 pallets 630x500 mm Handwheel Spares

Key data: 780 mm, 560 mm, 560 mm

CNC Universal Milling & Drilling Machine DECKEL MAHO DMC 60 T With track control Heidenhain iTNC 530 Year of construction: 2008 Travels: X 780 Y 560 Z 560 Speed range: 0 – 18,000 rpm infinitely variable With the following accessories: NC rotary table with 2-fold pallet changer 630 mm x 500 mm Vertical tool changer with 60 magazine slots Controlled milling head ( B axis ) IKZ 40 bar Conveyor Integrated screw conveyor Rotoclear Electronic handwheel Mode 3 + 4 Chip Sweeping Gun Full protection cabin with interior lighting 3-Piece Height-Adjustable Machine Shoes Operating instructions

Inv. Num. : 6351 Type: Pega 30507 Producer: AMADA Created: 1997 Parameters: Compressive force: 294 kN

Description: machine no.: 5885F00081A operating voltage: 400 V frequency: 50/60 Hz , connected load: 30 kVA , nominal current: 50 A , read off operating hours: 20768 set-up operation of axes X, Y, Z: 2000 mm/min , path meaurement system indirect of axes X, Y, Z: 0,001 mm resolution permissible table load: 500 kg , max. tool length: 240 mm , number of T-slots: 4 x 14 mm , distance: 150 mm , spindle nose up to table: max. 650 mm , max. tool diameter: 80 mm , tool length ,from spindle nose: max. 300 mm , tool weight: max. 7 kg , magazine loading: max. 72 kg , Incl. tool holders from tool turret z-motion: 500 mm, x-motion: 630 mm, y-motion: 500 mm, control: GE FANUC SERIES 180i-B, table surface area l x w : 800 x 500 mm, taper: SK 40, toolchanger positions: 24, turning speed range: 10,000 rpm, feed range: 30,000 mm/mi ...

Description: 'Serial number: 2881-0371 Operating voltage: 400V Frequency: 50/60 Hz Rated current: 70 A Connection: 40 kVA Control: GRUNDIG DIALOG112 Feed speed in X, Y and Z axes: 1 – 10000 mm/min Rapid traverse X, Y axis: 30000 mm/min Rapid traverse Z-axis: 20000 mm/min Table dimensions: 900 x 550 mm Permissible load: 800 kg Installation height: max. 590 mm With 5 grooves Distance spindle nose/table: min. 150 mm, max. 650 mm Travel paths: X: 700mm Y: 550mm Z: 500mm Tool holder: SK 40 Max. tool diameter: 200 mm Max. speed for tool diameter: 4500 rpm Incl. a 30-fold tool turret Tool diameter in the tool magazine: max. 80 mm standard tool Max. 140 mm for special tools Max. 200 mm for swing-out bridges Tool length from spindle nose: max. 300 mm Max. tool weight: 12 kg Incl. the SK 40 tool holders located in the tool changer and the clamped cutting tool Also included as a spare part is a s ...

turning length: 600 mm max. turning diameter: 320 mm swing diameter above cross guideway: 365 mm control: CNC Pilot 4290 Heidenhain Main spindle:: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 28 / 21 kW max. Torque: 320 / 240 Nm spindle nose: 170h5 chucking diameter: 215 mm spindle diameter in front bearing: 130 mm spindle bore: 87 mm max. bar capacity: 65 mm c-axis: turret:: number of toolpositions: 12 pos. tool taper: VDI 30 Driven Tool Stations:: Number of driven toolspositions: 12 pos. tool spindle speed range: max. 4.500 min/-1 power capacity driven tool-stations: 3,1 kW max. Torque: 10 Nm axis stroke:: x-travel: 250 mm z-travel: 635 mm Tailstock:: tailstock: 580 mm taper of center: MK 4 diameter of quill: 120 mm quill stroke: 150 mm feeds:: rapid traverse: X: 24 / Z: 30 m/min total power requirement: 44 kVA weight of the machine ca.: 5 ...

travel -x axis: 1.250 mm travel -y axis: 880 mm travel -z axis: 800 mm control: HEIDENHAIN turning speeds: 10.000 U/min numbers of positions in the tool changer: 120 tool taper: SK50 5-axis simultaneous machining center | DMG - DMC 125 U equipped with automatic B-axis Equipment/accessories: - 4 pallets - Handwheel - Blown air spindle center - Measuring probe: TS 641 The machine is in a well-maintained condition and can be inspected at any time under power. Please find further equipment information about this machine in the original documents included in the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC125U | DMC-125U | DMC 125U | DMC125 | DMC-125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: Fanuc 18iM Super Cap II turning speeds: 60-6000 U/min tool magazin:: 60 tool taper: BT50 total power requirement: 26 kW weight of the machine ca.: 23,6 t required space: 6,3 x 3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1050 mm, 800 mm, 560 mm

Machine Type: CNC Vertical Double Column Machining Center Manufacturer: DECKEL-MAHO (DMG) Model: DMC 105 V linear Year of construction: 2008 Condition: very good Offer Type: Used Machine Specifications: Control: Heidenhain iTNC 530 Speed range: 18000 rpm. Spindle holder: HSK-A63 Table: 1200 x 850 mm Travel range: x = 1050 mm y = 800 mm z = 560 mm Rapid traverse speed: in x/y/z = "90m/min." Tool changer: with 60-fold tool magazine Propulsion: 25/35 kW Remark: Heidenhain touch probe for: automatic workpiece measurement, Automatic tool measurement IKZ with high-pressure pump, Spindle cooling, Conveyor electric handwheel Weight: 12000 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Key data: 635 , 400

Jenbacher 312 Complete Biogas Unit for Sale. Condition: New from cancelled project. Make and Model: JENBACHER 312 Fuel: Biogas Year: 2023 Hours: 0 Capacity: 635kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Control panel (DIA.NE XT4), Base frame, Gas line . Price: Please Apply

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

Plasma Cutting Machine good condition, At call Manufacturer: Maschinenfabrik Bach GmbH, Apolda Machine No.: 15197-11 Year of construction: 03/2011 Control type: myBach Power: 1600 KVA Thermal-Dynamics DMC-3000 Ultra-Cut 300 Max. OCV: 380 VDC Min. Output Current: 10 Amps Maximum Output Current: 300 Amps Output voltage: 60 – 230 VDC Duty cycle: 100% at 300 A, 180 V Duty cycle ambient temperature: 104°F Power factor: 0.70 at 300 A DC output Cooling: Recirculating air (class F) The machine can be viewed at any time Transportation possible If you have any questions, just write or call: 0160 966 798 44 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Universal dishwasher Crockery, Wicker, Tray, Pot Dishwasher digital control with sensor-controlled soap dosing Chamber size:645 x 1290 x 635 mm HxWxD Connection 400 V, 32A-CEE plug, 16.5 kW with cold water connection Water consumption 12 liters per wash mobile

Description: SPECIFICATIONS Cylindrical grinder Character: Butler Newall Type: Blade Tip Grinder CNC Brand: Fanuc CNC Type: GE Fanuc Series 150-M CNC controlled Distance between centers: 1,500 mm Grinding length: 1,500 mm Height of centerpiece: 635 mm Slide diameter: ø1,000 mm Sliding stone diameter: ø760 mm Approx. Onsite Dimension. (l x w x h): 8,000 x 6,000 x 2,500 mm, weight approx.: 27,000 kg

Description: SPECIFICATIONS Character: Stenhoj Type: 50,635 Capacity: 60 T Plate dimension: 2,000 x 2,000 mm Slug: 400 mm Press speed: 20 mm/sec Hydraulically adjustable Machine dimensions (lxwxh): 2,500 x 2,000 x 2,450 mm Machine weight: 6,800 kg weight approx.: 6,800 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,000 x 2,450 mm

Key data: 1016 mm, 508 mm, 635 mm

Travel X-axis 1016 mm Y-axis 508 mm Z-axis 635 mm Clamping table Table clamping surface 1220x457 mm Number of T-slots 5 Max. table load 1580 kg Milling spindle Spindle speed 10000 rpm Spindle holder ISO 40 Spindle drive 11 kW Feed Feed X-Y-Z axis 0-7620 mm/min Rapid traverse X-Y-Z axis 18 m/min Tool changer Number of tools 24, Side-mounted tool changer Control Haas Automation, electric handwheel 4.Axis machine prepared for a 4.axis Coolant coolant system 200 lt. with chip conveyor Internal cooling by the spindle Remark Oil mist extraction and 2 foot switches for pneumatic actuation of mechanical vices not included

Description: Serial number 2880-0324 Tool diameter max. 200 mm, tool diameter in the magazine ,90 to 140 mm Tool length from spindle nose ,max. 300 mm max. tool weight 12 kg Last spindle inspection in 2023  , Attention: without machine vices on the table z-motion: 500 mm, max. workpiece weight between centers: 800 kg, x-motion: 500 mm, y-motion: 420 mm, control: HEIDENHAIN TNC 426, table surface area l x w : 700x400 mm, taper: SK 40, toolchanger positions: 30, turning speed range: 15,000 rpm, feed range: 1 bis 10000 mm/min, rapid motion: 30 / 20 m/min, weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 2,600 mm

Description: Serial number 2881 - 0447  , Max. Tool diameter: 80 / 140 mm Max. Tool length: 300 mm Max. Tool weight: 12 kg  , Attention: The machine vices on the table are not included in the scope of delivery Attention: the last inspection of the spindle took place in 2023. z-motion: 500 mm, max. workpiece weight between centers: 800 kg, x-motion: 700 mm, y-motion: 550 mm, control: HEIDENHAIN TNC 426, table surface area l x w : 900x550 mm, taper: Sk40, toolchanger positions: 30, turning speed range: 15,000 rpm, feed range: 1 - 10000 mm/min, rapid motion: 30 / 20 m/min, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,500 x 2,900 mm

Description: NOT SOLDABLE OUTSIDE ITALY Power supply: Petrol Chassis number: ZFA3340000P703770 License plate: FT 859 EZ Keys: Yes Registration document: Yes Certificate of ownership: No Approx. Onsite Dimension. (l x w x h): 4,300 x 1,800 x 1,600 mm, weight approx.: 1,800 kg, stroke displacement: 1,368 cm³, mileage: 40,635 km

: neu : 2024 : 3984 : prompt, Zwischenverkauf v : Spanien : 9250 € : 191.48 € : 1 : 32 mm : MK 3 : 250 mm : 65 - 125 - 185 - 365 - 54 U/min : M24 : 665 mm : 640 mm : 2100 mm : 260 kg : Automatisch 0,10 - 0,20 - mm/U : 100 mm : 85 - 635 mm : 1.170 mm : 300 x 270 mm : 665 x 400 mm : 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine 3 aut. feeds left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN (symbol photo) OPTIONS: lighting equipment inkl. coolant equipment and machine base with T-slots inkl. reverse for tapping € 785,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1016 mm y-travel: 508 mm z-travel: 635 mm control: Haas total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Technical details: Control type: CNC, control name: Siemens 810, x-travel 630 mm, y-travel 500 mm, z-travel 500 mm, spindle holder SK 40, table clamping area 800 x 500 mm, table load 500 kg, IKZ spindle speed: 6000 U/ min, total power requirement 30 kW, additional information: Including IKZ - internal spindle cooling, operating hours: 15545.34 h, table without vices: installation height with max. tool length max. 240 mm, distance spindle nose / table (min. 150 mm / max. 65 Approx. Onsite Dimension. (l x w x h): 4,100 x 2,400 x 2,700 mm, weight approx.: 4,500 kg

Description: Serial number 2881-0326 max. tool diameter 80/140 mm Tool length from spindle nose ,300 mm max. tool weight 12 kg Includes chip conveyor and mounted 4th axis  , Last service report from ,April 2021, where, among other things, the spindle was checked. z-motion: 500 mm, max. workpiece weight between centers: 800 kg, x-motion: 700 mm, y-motion: 550 mm, control: HEIDENHAIN TNC 426, table surface area l x w : 900x550 mm, taper: SK 40, toolchanger positions: 30, turning speed range: 8,000 rpm, feed range: 1 bis 10000 mm/min, rapid motion: 30/20 m/min, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,500 x 2,900 mm

This DMG DMC 1035 V ecoline Vertical Machining center was manufactured in the year 2012 in China. It is equipped with a SIEMENS SLIMline control unit and has 3 axis. The machine has a spindle speed of 8000 rpm. Availability is beginning of May 2024, depending on the arrival of a new machine.

This DMG MORI DMC 1150V 3-Axis Vertical Machining Centre was manufactured in the year 2017 in Germany and has 656 spindle hours. It is equipped with a DMG MORI / SIEMENS 840D Solution Line control unit and a 18,000 rpm spindle with SK40. The machine comes with chip conveyor, IKZ (20 bar), oil mist extractor, machine cabin roof, touch probe Heidenhain TS 649 and electronic handwheel. Contact us anytime for further questions!

This Deckel Maho DMC 103 V Vertical Machining Center was manufactured in the year 1998. It is controlled by a SIEMENS SINUMERIK 810 D control unit. This 3-axis CNC milling machine has a spindle speed of 8000 rpm and a 24-position tool magazine with SK40. It is fully equipped with internal / externl cooling, chip conveyor and an electronic handwheel. With a completely renewed control it works flawlessly.

This DECKEL MAHO DMC 60T Horizontal Machining center was manufactured in the year 2008. The machine has two linear guides with a ball screw on each of the three axes X, Y and Z. See photo and video gallery for more detailed impressions.

This DMG MORI DMC 1150V Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a HEIDENHAIN TNC 640 control unit and has 3 axis. The machine has a spindle speed of 12000 rpm and operates with SK40.

This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 3 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions.

This DMG DMC 80 U duoBLOCK Universal Machining center was made in 2008 in Germany and has 28951 production hours, of which 14200 are spindle hours. It is equipped with a Heidenhain TNC 530 control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.

This Deckel Maho DMC 65V Vertical Machining center was manufactured in the year 1999 in Germany and has 71146 production hours. It is equipped with a HEIDENHAIN control unit and has 4 axis. The machine has a spindle speed of 18000 rpm, is in good condition and well maintained.

Key data: 800 mm, 800 mm, 800 mm

1Universal machining center DMG-Mori DMC 80 U Duoblock built in 2007 Control Heidenhain Mill-Plus IT Travel X/Y/Z 800 mm x 800 mm x 800 mm Universal milling head with B-axis HSK 63A with 18,000 rpm NC rotary table C-axis with pallet carrier Tool changer with 180 places Rotary pallet changer d 800 mm x 630 mm IKZ with 2 pressure levels 40/80 bar , 980 l Conveyor Infrared Probe Heidenhain TS 640 Rinsing gun, electr. Handwheel , mode 4

x-travel: 1.600 mm y-travel: 1.250 mm z-travel: 1.000 mm Control: SIEMENS 8400 Powerline 3D numbers of pallets: 6 size of pallet: 1.250 ×1.000 mm T-slots: DIN 55201-A2 c-axis: 0,001 ° spindle: 85/65 kW spindle (milling):: 0,000 rapid travel x/y/z: 60.000 mm/min tool adaptor: HSK-A 63 DIN 69893 Speed: 20-30.000 U/min turning tools travel - vertical: 40/32 mm tool magazin:: 120 Internal cooling system: 50 bar Chip coveyor: Inkl. handwheel: SIEMENS 840D total power requirement: 139 kWA weight of the machine ca.: 55 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis vertical machining center manufactured in 2012 features a DMG DMC 1035 v eco with Siemens 810 D ShopMill control system, capable of spindle speeds up to 10,000 rpm with an SK40 holder and cooling through the spindle at 12 bar. It includes a 30-tool magazine, chip conveyor, and paper belt filter, supporting a table of 1200 x 560 mm with a maximum load of 1,000 kg. It has approximately 10,500 spindle hours and comes with a measuring probe for both tool and workpiece. Consider the DMG DMC 1035 v eco machine we have for sale for precision and reliability. For more details, please contact us.

Clamping force [kN] 900 Dimensions of mounting plates (hxv) [mm] 635x610 Clearance between columns (hxv) [mm] 430x360 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 36 Injection volume [cm3] 157.8 Injection weight [g] 142 Injection pressure [bar] 2347 Electrical and hydraulic equipment Rated power of the pump motor [kW] 15 Heater power [kW] 11.3

Description: In case With operating instructions Technical data: Laser power ≤ 1mW (laser class 2) Laser light: visible red light Wavelength: 635 nm Accuracy: max. +/- 0.3 mm/m deviation Operating time: approx. 10 h without recharging Speed: 0 - 460 rpm stepless For further technical data see pictures Approx. Onsite Dimension. (l x w x h): 400 x 260 x 120 mm, weight approx.: 8 kg

Table size 1372 x 610 mm x-axis (strokes) 1016 y-axis (strokes) 660 Z axis (strokes) 635 Spindle attachment (chuck) ISO 40 Number of tools (atc magazine) 30 Spindle speed (main spindle) 12000 rpm Herd power 22.4 kW Unity of government Haas Chip conveyor Coclea Weight (machine dimensions) 7485 kg

x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm CNC-control: SINUMERIK 810D SIEMENS table-size: 1200 x 560 mm max. table load: 1000 kg spindle taper: SK 40 spindle turning speed range: 8.000 U/min drive capacity - spindle motor: 13 kW feed stepless: 20.000 mm/min rapid traverse: 25 m/min tool change unit: 20 Pos. coolant: voltage: 400 V total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 2,55 x 2,30 x 2,25 m chip conveyor: 3,80 x 0,90 x 1,55 m - Fabr.No.: 1539000480E - Machine ON: 14.035 h - Spindle ON: 5.356 h - Control SIEMENS Sinumerik 810 D - electrical hand wheel - chip conveyor - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: 840 D Siemens Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A63 NC-Swivle milling head:: swivellable: B: -30 / +180 ° swivle time: 1,2 s pallet changer:: numbers of pallets: 2 size of pallet: 1.000 x 800 mm max. workpiece weight: 1.500 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 180 pos. tool taper: HSK-A63 total power requirement: 78 kVA weight of the machine ca.: 20,5 t dimensions of the machine ca.: 8,0 x 7,0 x 3,4 m Documents: Chip conveyor: Coolantsystem: through spindle coolant: pallet changer: Automatic Tool Changer: full splash guard: Rotary screen: elektr. hand wheel: 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rota ...

Key data: 900 kN

Boy 90 M Year of construction: 2004 Injection unit: Screw diameter: 42 mm Spray weight: 193 g Injection pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tie bar spacing: 430x360 mm Size of clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 1 Metrics: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 1100 kN

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...

Description: Technical data Range: 60 m Accuracy: 1.5mm Unit of measurement: m/inch/feet Laser Color: Red Laser class: II Laser diode wavelength: 635nm Power: <,1mW Backlit screen: yes Sound alarm: yes Automatic laser shutdown: after 70 seconds Rangefinder automatic shutdown: after 10 minutes Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg

Description: Technical data Range: 60 m Accuracy: 1.5mm Unit of measurement: m/inch/feet Laser Color: Red Laser class: II Laser diode wavelength: 635nm Power: <,1mW Backlit screen: yes Sound alarm: yes Automatic laser shutdown: after 70 seconds Rangefinder automatic shutdown: after 10 minutes Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg