dmc 60 used for sale

x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm control: Heidenhain TNC 430 spindle speed:: 10000 U/min power capacity - milling spindle: 13/9 kW feed: 30 m/min rapid traverse: 30 m/min no. of workpieces in the magazine: 24 Stück tool taper: SK 40 table surface area: 800 x 500 mm table load: 0,5 t Overall size: 1,9 x 3,3 x 2,6 mm weight of the machine ca.: 4500 kg Used vertical machining centre in good condition. - external eletronic hand wheel - coolant system - servo tool magazin The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis DECKEL MAHO DMC 70 H duoblock was manufactured in 2007. It features a Siemens 840D control unit and a robust tool holder type of SK40. The machine is equipped with hydraulically clamped clamping towers, ensuring secure workpiece handling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 70 H duoblock horizontal machining centre we have for sale. Contact us for further details.

Excellent condition - Fully operational - Loading / Transport possible! Work table: Clamping surface: 790 x 560 mm Table load (max.): 600 kg Equipment / accessories: Chip management: Chip conveyor Coolant management: IKZ system with paper belt filter and high pressure Oil mist extraction: Mechanical separator Set-up mode: Electronic handwheel Further equipment: Flushing gun Transport dimensions: Machine: 2,800 x 2,000 x 2,700 mm, approx. 4,100 kg Chip conveyor: 3,000 x 1,000 x 1,650 mm, approx. 450 kg IKZ unit: 1,800 x 1,300 x 1,800 mm, approx. 450 kg

x-travel: 1.250 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: SIN840D pl C-axis (table): 360 x 0,001 ° B-axis (head): -10 - 180 x 0,001 ° rotary table speeds infinitely variable: 10 - 500 U/min feed X/Y/Z/-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z: 60,00 m/min tool taper: HSK 100 spindle turning speed - stepless programmable: 20 - 8.000 1/min spindle turning speed - gearbox stage 1: 20 - 1.600 1/min. spindle turning speed - gearbox stage 2: 1.600 - 8.000 1/min. power capacity at 100 % load: 19,00 kW power capacity at 40 % load: 28,00 KW max. torque at 40% / 100% load: 772 / 492 Nm table surface area: Ø1.100 mm table load: 1,50 t tool magazine with: 240 tool diameter: 110 mm tool diameter with 2 vacant positions: 230 mm tool length - max.: 500 mm weight of tools max.: 30,00 kg total power requirement: 85,00 kW weight of the machine ca.: 32,50 t dimensions of the machine ca.: 9, ...

This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details.

CNC vertical machining center Type: DMC 1035 V ECOLINE Manufacturer: DMG MORI Year: 2012 Control: Siemens Sinumerick 840D Total hours: 12,058 Spindle hours: 5,039 X: 1035 mm Y: 560 mm Z: 510 mm Working table: 1200 x 560 mm Tool magazine: 20 positions Max spindle speed: 8,000 rpm Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: SIN840D spindle turning speed - stepless: 5 - 10.000 U/min power capacity at 40 % load: 38,00 KW power capacity at 100 % load: 25,00 kW max. torque at 40% / 100% load: 288 / 187 kW spindle diameter in front bearing: mm spindle taper: HSK 100 feed X/Y/Z/-axis: 0 - 60.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed capacity X/Y/Z: 12,00 kN B - axis: 180 x 0,001 ° rapid travel B-axis: 10,00 U/min size of pallet: 800 x 630 mm table load: 0,80 t C-axis: 360 x 0,001 ° rotary table speeds infinitely variable: 1 - 800 U/min power capacity - table: 13,85 kW max. torque on the faceplate: 1.550 Nm toolpiece magazine: chain magazine: 60 Stück tool diameter: 110 mm wotkpiece diameter with 2 vacant positions: 230 mm tool length - max.: 450 mm weight of tools max.: 30,00 kg total power requirement: 80,00 kW weight of the machine ca.: 18,0 ...

CNC vertical machining center Type: DMC 1035 eco Manufacturer: DMG Year: 2010 Control: Siemens Sinumerik 810D Total hours: 25,503 Spindle hours:13,362 X: 1035 mm Y: 560 mm Z: 510 mm Max spindle speed: 8,000 rpm Tool magazine: 20 positions Rapid traverse X/Y/Z: 30 m/min Rated power: 17 kVA Torque:83 Nm Table:560 x 1200 mm Table load: 1000 kg Chip conveyor Dimensions: 3137 x 3355 x 2758 mm Machine weight: 4250 kg In good condition, fully functional, under power Find more here - / Contact us at -

x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm CNC-control: iTNC530 HEIDENHAIN table-size: 1000 x 560 mm max. table load: 800 kg spindle taper: SK 40 spindle turning speed range: 20 - 14.000 U/min feed stepless: 1 - 20.000 mm/min rapid traverse: 20 m/min drive capacity - spindle motor: 13 / 9 kW tool change unit: 32 Pos coolant: IKZ 25 bar voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,50 x 3,50 x 2,70 m chip conveyor: 3,55 x 0,90 x 1,55 m coolant equipment: 1,60 x 1,35 x 1,80 m spindle oil cooler: 0,40 x 0,50 x 1,00 m Transformer: 0,75 x 0,45 x 0,65 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis) -  ...

x-travel: 1.250 mm y-travel: 1.000 mm z-travel: 1.000 mm control: SIN840D pl C-axis (table): 360 x 0,001 ° feed X/Y/Z/-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z: 60,00 m/min tool taper: SK50 spindle turning speed - stepless programmable: 20 - 8.000 1/min spindle turning speed - gearbox stage 1: 20 - 1.400 1/min. spindle turning speed - gearbox stage 2: 1.400 - 8.000 1/min. power capacity at 100 % load: 32,00 kW power capacity at 40 % load: 44,00 KW max. torque at 40% / 100% load: 1.214 / 827 Nm table surface area: 800 x 800 mm table load: 1,50 t tool piece magazine with: 240 tool diameter: 110 mm wotkpiece diameter with 2 vacant positions: 230 mm tool length - max.: 500 mm weight of tools max.: 30,00 kg total power requirement: 85,00 kW weight of the machine ca.: 32,00 t dimensions of the machine ca.: 9,50 x 4,80 x H3,80 m Horizontal machining center with pallet changer. SIEMENS SIN ...

x-travel:635 mm y-travel:510 mm z-travel:460 mm turning speed range:20 - 10.000 U/min tool taper:SK 40 table clamping surface LxW:790 x 560 mm Machine with glass scales Full safety cabin with sliding doors + interior lighting Height-adjustable machine shoes 3 pcs.

x-travel:1250 mm y-travel:880 mm z-travel:800 mm control: Heidenhain TNC 430 tool change unit:60 Pos. Tool bore:SK 50 turning speeds:8000 1/min size of pallet:1000 x 800 mm total power requirement:56 kVA weight of the machine ca.:14,3 t dimensions of the machine ca.:5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020

x-travel:700 mm y-travel:700 mm z-travel:700 mm turning speeds:18.000 1/min max. torque on the spindle:110 / 84 Nm tool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:180 fach size of pallet:500 x 500 mm mm max. workpiece weight:600 kg spindle:34 / 28 kW rapid traverse:60 m/min total power requirement:68 kVA weight of the machine ca.:10,5 t dimensions of the machine ca.:9,5 x 7,5 x 3,4 m dimensions for transport:4,3 x 2,4 x 2,6 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyo ...

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:12.000 1/min tool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fach size of pallet:630 x 630mm mm spindle:52 kW / 430Nm total power requirement:87 kVA weight of the machine ca.:15 t dimensions for transport:4,6 x 2,95 x 2,7 m horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours

Scania AT-Motor Type=DC12-60A Pump-Nozzle-Motor with EMS Control max.337KW at 1,800rpm > Fixed speed motor. Incl.Anlasser+alternator suitable for vegetable oil and palm oil. Immediately available from stock! Also suitable for vegetable oil operation. info@miw-zeven.de

We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus  ...

Height=0.765 m, Overall length= 0.6 m, Overall width= 0.6 m, Net weight= 58 kg,

- The classic must press nominal power up to 180 kg/h engine power press 1.1 (1.5) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 1000 mm width 900 mm Height 1700 mm Hehe Assumption 1770 mm Weight 216 kg material Polystyrene, basket and Muehle in 1.4301 / AISI 304 Press force 16.1 to Press pressure 320 bar Juice yield up to 65% connection for juice drain 30mm High juice drain 480 mm High marc ejection 580 mm Supplied 1 press bag 60l, 3 inserts 38cm, 3 press inserts made of acacia wood 38cm ; New machine - best condition

Painted ceiling supports 3.60m Steel construction supports with a red dip bath paint. Decoupling system - this enables a quick disarming of the support with little effort Foot reinforcement - by mounting a stronger pipe near the footplate Due to holes every 100 mm in the inner tube, the extension length varies between 50 and 500 cm Compatible with most of the accessories of other formwork Technical data: Inner and outer tube made of steel S235JR according to UNI EN 10219-1 / 2 concealed threads, step 8 mm, for adjusting the length Threaded pins directly on the outer tube, or welded, manufactured by rolling, i.e. without rejecting the material Lower plate available in flat or curved version Upper plate available in three versions (flat plate, with fixed cross or "U"-shaped) Highly resistant safety hook for fastening between inner and outer tube Hand-squeezing for safe con ...

- the classic must press in fruit processing nominal power up to 180 kg/h engine power 1.1 (1.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1078 mm width 800 mm Hoehe 1700 mm Hoehe Acceptance 1 142 mm Basket in 1.4301 / AISI 304 press force 16.1 to Press pressure 320 bar Juice yield up to 65% Connection for juice flow High juice drain 480 mm Hoehe marc ejection 642 mm Scope of delivery 1 press bag 60l, 3 inserts of 38cm, 3 press inserts made of acacia wood ; New machine - best condition

FEEDER BELT - CONVEYOR BELT GFB 600 FOR INJECTOR GÜNTHER PI 104/236 - overhauled, in gut condition Belt width 600 mm Belt length 810 mm Total length 1360 mm Width 1210 mm Height adjustable from 1010 to 1260 mm Request a quote on iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt -Design: Structured band, KN cross-stud structure, stapled -Width: 600 mm -Length: 5100 mm -Weight: 10 kg

Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 600 mm -Length: 2290 mm -Thickness: 2 mm -Transport dimensions: Ø 100 x 600 mm -Weight: 2.6 kg

Grease Environmentally friendly, quickly biodegradable lubricating greases based on calcium soap and rapeseed oil. Manufacturer: Fuchs Item No.: 600654726 Plantogel 2 N 180 kg NEW - orig. packaging

New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, Offered AS IS, WHERE IS., price options: as is, checked, lightly reconditioned, totally reconditioned

Manufacturer LINDNER N O W A T R E D U C E D P R I C E Type Chain Extraction Belt 9.600 mm long With central chain transport and paddles Flat type on supports Constructed in sturdy steel 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width

2025 BIG backhoe bucket 60cm with Martin M3 attachment

2025 BIG backhoe bucket 60cm with MS01 Symblock attachment, Technical specifications:, - Weight: 80 kg, - Recording width: 60 cm, - Contents: 95 liters, - CAT 2 - suitable for 1.9 - 2.7 t excavators

In Stockroom at the warehouse in Blomberg! The KR BM 600 is a profile spraying machine of the latest Kama generation. The machine is equipped with a wide cabin, a conveyor belt transport system with paint recovery and belt washer system. Automatic loading and unloading systems are available as an option. SPRAY ARMS, PART DETECTION 4 spray arms, adjustable in height, inclination and angle, are installed as standard. adjustable in height, inclination and angle. On these arms the 4 spraying can be used. By means of part recognition at the inlet of the spraying machine the individual spray guns are controlled. Optionally, additional guns and pumps can be installed or a version with a double booth can be selected. CONVEYOR AND BELT CLEANING SYSTEM WITH PAINT RECOVERY SYSTEM The paint that is sprayed onto the 600mm wide polyolefin conveyor belt is automatically squeegeed off and can be reus ...

- Producer Venjakob - Type VEN SPRAY DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Diameter exhaust air pipe 500 mm - Exhaust air 10.000 m³/h - Transport belttransport System - Feed speed adjustable ~ 2 - 7,5 m/min - Belt cleaning system - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 - Number of installed lacquer circles 2 Stk. - quick change system for spraying guns - Supply air box - Suitably for water based lacquer - Suitably for solvent based lacquer - Switch cabinet built into the machine - Total connection power ~ 29 - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Voltage fluctuation max. +/- 5 %

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

VECOPLAN VAZ M-K-T- 1600, 1.600 mm long rotor, rotor diameter 370, rotor rpm 200, HI-TORQUE a.c.motor 110 kW, n.42 cutting pieces 60x60 mm, screen size 60 mm (or different), horizontal ram, hydraulic pack, Electric cabinet, Total dimensions : LxWxH mt.4,315 x 2,885 x 1,600, Total weight kg.7.200 ca, Machine offered totally reconditioned, Our offer includes a MTA chilling unit, installed power - used power in work: about 60-65% : 110 kW, working width: 1.600 mm, conditions: reconditioned, type: Single shaft

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

price only for filter frame Plates maximum: 150 Plate formats: 600x600 dimension ca. 310x90x220 cm Distance between first plate and spindle approx.140cm

Used SMI SK 600F shrink wrapper 21600 BPHTechnical Specifications & Performance DataThe SMI SK 600 F Shrink Wrapper is an automatic packaging machine designed for high-efficiency bundling with shrink film in beverage production and industrial packaging environments. Manufactured by SMI engineering, this second hand machine delivers reliable performance and versatile pack configurations for PET, glass, and aluminum can containers. Optimized for integration into a used bottling line, it supports applications across water, CSD, milk, oil, beer, wine, and spirits.Manufacturer: SMIModel: SK 600 FYear of construction: 1998Maximum speed: up to 21,600 units/hour (approx. 60 bundles/min with 3×2 of 1.5L)Current format: 1.5L, 3×2 bundleContainer materials: PET, Glass, Aluminum cansPackage type: Shrink film (trayless)Max container height: 380 mmMachine pitch: 545 mmWorking height (table): 125 ...

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

1 used shrink tunnel, made ZVT (now KHS), type ST/II-600DG. Built in 1995. With belt braiding tape (for untabivalent products such as PET bottles). Total length 6,000 mm. Passage 570 mm High x 400 mm wide. E-connection 415V (x5%) / 50 Hz. Top condition (belt recently renewed!). Operator side: right or left. (2 machines available).

We offer from stock zzügl. Packaging+Freight to: Timing belt 113 teeth a 42,-/piece Cylinder head LDW1204/1204T/1404 net 840,-/piece all prices to the tax mail= info@miw-zeven.de

Scania motors type= DC/DI12 pump nozzle with max.406KW at 1,500/1,800 RPM or in the all-speed range available from stock at short notice with warranty. Also CHP use with vegetable oil,palm oil,fryer oil,etc... Promotions! Mail=info@miw-zeven.de

Rietschle vacuum pump CLF 60V 60m3/h, 1400rpm, intake pressure 1 torr, 1.5 KW

All original spare parts+engines Lombardini from stock ready to ship the following motors available from stock immediately: LDW602/ 1003 / 1204/1204T/ 1404 MIW Ltd. Engine Repair Plant North-West Ring 8 D-2704 zeven-Germany Phone: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Mail=info@miw-zeven.de

MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany info@miw-zeven

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF

Load 6000 kg, pneumat. Drive