dividing head used for sale

SCHEER saw fully functional, the entire control cabinet is invested, practically new, reliable, can be cut 5 panels at a time

PANHANS ECOPAN Working area 3200x3200 Saw with undercutter, 3 tables with air cushion Full technical documentation Cutting optimization program Opal First owner, machine in continuous operation very little used,

Gebrauchtmaschine

Very good conditions, Renovated Weight range, two versions: 40 - 1000 gr or 150 - 2300 gr Capacity 1500-3000 as two pocket and 750 - 1500 as one pocket. 90 liter stainless steel hopper as standard (~ 63 kg dough). Easy-handling and cleaning – all covers in stainless steel and removable.

Used dough divider RHEON, type: Twin Divider VX 201 -completely overhauled- -refurbished - Condition: Very good - 6 months warranty - Support in case of technical problems or spare parts Specifications: Weight range: 1 row: 150-1,200g, 2 rows: 50-500g Length range: 75-999mm Cutting speed: max. 20 cuts/min. (consecutively) Capacity: 400 kg/h El. Connection: 3x 400 V, 50 Hz, 3.7 A The machine has been completely overhauled and is in excellent condition. Viewing and test run are possible by arrangement.

SPECIFICATIONS: Equipment: Motorized loading roller conveyor Motorized roller stroke Slide arm with 7 pneumatic grippers Panel saw with a cutting width of 4500 mm Door pad on felt-covered platforms Sliding arm with 8 pneumatic grippers, connected by a continuous rod Lateral alignment device Panel saw width 2500 mm Vibrating chute for picking up and removing waste Shredder WEIMA model WLH300, built in 2007, motor 18.5 kW Unloading gantry 3ERRE AUTOMAZIONI model 1131, built in 2007 - length approx. 13000 mm Pneumatically operated mechanical gripping unit Motorized roller conveyor width 1700 mm length 4000 mm Side stop with idle rollers, side aligner, retractable front stop Motorized roller conveyor, width 1600 mm, length 5000 mm, concealed front stop 2 motorized floor roller conveyors, width 1600 mm, length 5000 mm 4 floor roller conveyors, width 900 mm, length 5000 mm ...

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head, milling head, top head -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Gear: 31 teeth -Dimensions: 505/180 / H195 mm -Weight: 30 kg

Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Sensor, write head, read head, tactile bore measurement -from: warehouse liquidation -Product group: LF (70/455 kHz) -Dimension: 40 x 33 x 61.5 mm -Connection: M12x1 socket, 5.00 m, PU -Protection class: IP 67 -Weight: 450 g

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

small die-head with 60, 80 or 100 mm die-insert, with cooling ring

4x RING EYE COMPONENTS AND 2x STAPLING HEAD COMPONENTS FOR STITCHING HEADS HOHNER 48/5 S

new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

Shipping within Germany 8.- insured VAT not deductible

Dividing head, dividing head dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -with translation -Shaft holder: Ø 20 mm -Dimensions: 470/230/H240 mm -Weight: 30 kg

Dividing head, dividing head dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Tip height: 105 mm -Dimensions: 270/130/H165 mm -Weight: 13.3 kg

Dividing head, spiral milling device, dividing head, dividing attachment, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Part head -Distance between centers: 450 mm -Take: SK40 -suitable for: milling cutter grinding -Translation: 1:40 -swiveling -Weight: 60 kg

Dividing head, spiral milling device with all accessories -comes: from a lid FP2 -Part head with: counter bearing -Change gears -dividing disks -Distance between centers: 415 mm -Take: SK40 -suitable for: milling cutter grinding -Translation: 1:40 -Part head: swiveling -Dimensions: 820/390/H440 mm -Weight: 80 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Adjustment: SK50 -Tip height: 145 mm -Part head: swiveling, rotatable -Dimensions: 220/220/H285 mm -Weight: 17 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Recording: MK5 -Tip height: 145 mm -Part head: swiveling -Dimensions: 250/230/H300 mm -Weight: 23 kg

Dividing head, dividing head, rotary table, rotary table -with: grid -Take: inside collet -Tip height: mm -Passage: Ø mm -Part head: swiveling -Dimensions: 440/190/H200 mm -Weight: 43 kg

Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: mm -Passage: Ø 32 mm -Part head: swiveling -Dimensions: 430/430/H280 mm -Weight: 83 kg

Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: 100 mm -Part head: swiveling -Dimensions: 320/320/H230 mm -Weight: 37 kg

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 140 mm -Height: 185 mm -Max. 8 divisions can be set -Bore center: Ø 35 mm -Weight: 30 kg

Rotary table, rotary indexing table, dividing head, dividing head -Four-jaw chuck: Ø 165 mm -Height: 185 mm -Dimensions: 240/320/H185 mm -Weight: 24 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories: for tool grinding machine -Lynets, scanners, counter bearings -Weight: 25 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for tool grinder -Take: SK40 -Tip height: 100 mm -swiveling -Dimensions: 640/260/H290 mm -Weight: 48 kg

Optical dividing head, precision dividing head -Max. Center height: 76 mm -Max. Distance between centers: 200 mm -with collets: 3,4,5,6,7,8,9,10,16 mm -Wooden box -Total weight per box: 42 kg -Number: 1x available

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Chuck size: O 160 mm -without: interchangeable jaws -Bore centric: mm -Dimensions: 320/230 / H220 mm -Weight: 30 kg

Dividing head, spiral milling device, dividing attachment, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories: for tool grinding machine -Take: SK40 -Tip height: 110 mm -Part head: swivel/rotatable/tiltable -Dimensions: 420/350/H240 mm -Weight: 38 kg

We have a wide range of dosing devices in our warehouse and workshop. Several Yamato, Ishida, Combimat multi-head scales. Lots of Rovema, Webb snail dosages! Depending on your product, your wishes and possibilities, we can offer you a suitable dosage.

M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW

with 3-jaw lining Röhm - 200 mm - 15 pitch

Deutz cylinder heads in exchange complete with new valves, seat rings+guides Head screws FL712/812 = Net 36,-/piece Head seal kit FL712/812 = Net 25,-/set all prices per piece plus. law.Tax.Price changes reserved. info@miw-zeven.de

Deutz Zylinderköpfe im Tausch komplett mit neuen Ventilen,Sitzringen+Führungen. info@miw-zeven.de

We offer new cylinder heads with valves+springs fully assembled from stock immediately available to: MIW Ltd. Engine Repair Plant North-West Ring 8 D-27404 Zeven / Germany Tel:0049(0) 4281-950583 Fax:0049(0) 4281-950585 Email: info@miw-zeven.de abc.miw-zeven.de

Güldner 2-6L79,G20-50 Zylinderkopf kpl.mit Ventilen im Austausch ab Lager lieferbar. Preise per Stück,zuzügl.gesetzl.Steuer,Preisänderungen vorbehalten. info@miw-zeven.de

Column heads, various manufacturers Three-foot stand, Doka Three-foot stand, div. manufacturer Three-foot stand with chain (various manufacturer) Three-foot stand with chain (div. hesteller), without wedge C20 Suspension Z (approx. quantities) Scaly bracket Z (approx. quantities) Scaly bracket, painted (approx. quantities) galvanized lattice box DB grid box

Cylinder head complete with valves in exchange info@miw-zeven.de

Zylinderkopf im Austausch DEUTZ BF4M2012/C komplett überholt mit Ventilen. sofort ab Lager lieferbar info@miw-zeven.de

Technical data: Displacement of the grinding head: .60 mm Axis Shift: .50 mm Total power requirement: 25 kW Contact force: 10-1000 N Grinding wheel diameter: 650 mm Grinding wheel width: 8-20 mm

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

screw caper heads ZALKIN aluminium 28 mm from filler SIMONAZZI

Cylinder head DEUTZ FL612 complete with valves in exchange available from stock all prices per piece plus vat, price changes reserved.