disc used for sale

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant New mill never used, in former design. ACM 40 EC Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air fl ...

Turning diameter: 1300 mm Turning length: 4500 mm Turret positions: 1 Positions ATC: 142   Number controlled axis: 7   CNC Brand: Siemens CNC Model: 840D NILES SIMMONS N50/2 MC  TURN MILL DRILL MACHINING Make            : NILES SIMMONS Germany Typ            &nbs p; : N 50 / 2 MC x 4500 Age            &nbs p; : 2008   Swing over slide              : 1.250 Swing over bed               : 1.300 DBC turning length          : 4.500 Spindle bore     &nb ...

1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).

Catalog No. 6809 TECHNICAL DATA - track width 350mm - roller width 370mm - max cutting height 200mm - max disc diameter 300mm - disc hole diameter 80mm in advance: - repellants - pressing sliding shaft - repellants - 2 smooth sliding shafts - repellants - shaft with saws 75kW - 3 smooth sliding shafts - repellants - smooth sliding shaft from down: - sliding roller - repellants - caterpillar - shaft with saws 95kW - caterpillar - 1 output shaft, toothed, pulling - rollers pressed pneumatically - max disc diameter 300mm - electric lifting of the upper body up/down 1.1 kW - automatic central lubrication - smooth adjustment of the feed speed 3kW - diameter of the exhaust connection 190mm, 200mm - feeding table with guide and pneumatic clamp rolls in the feeder: - 1 sliding, 9 pulling - dimensions of the feeder length / width / height 6520x1300x1050mm - dim ...

Rotary milling machine.Auto copy shaping machine with profile sander LH-100-4PS This equipment can be applied on first rough copy-shapings. No matter they are round, oval, rectangle or irregular profiles, all can be roughly copied and shaped out at one time. It can save much time if using band saw for first rough cuttings. Technical specifications: Max shaping capacity- 2250mm x 1100mm Disc dia -1800 mm Round disc revolving speed-0,5-3 RPM Main spindle revolving speed-9000 RPM Main spindle dia -30 mm Shaping cutter dia-100 mm Driven wheel dia -100 mm Round disc driving power-3 HP Main spindle driving power-10 HP x 2 Sander power-3 HP x 2

Part Number 6481 TECHNICAL DATA - max disc diameter 350mm - disc bore diameter 30mm - shield cover - max cutting height 100mm - max cutting width 800mm - possibility of cutting at an angle in a vertical plane of +90°/-90° (arm travel or disc travel) - the ability to rotate the arm right / left - arm adjustment up/down - diameter of the extraction connection 60mm - 3kW motor - table top size 1100x1040mm - dimensions length / width / height 1550x1100x1600mm - weight 191kg ADVANTAGES – very good condition – used saw Net price: 7 900 PLN Net price: 1 816 EUR depending on the price 4,35 EUR (Prices may fluctuate with higher fluctuations)

Catalogue number: 6746 TECHNICAL SPECIFICATIONS - track width 450mm - shaft width 550mm - disc bore diameter 80mm - min disc diameter 250mm - max disc diameter 400mm - max cutting height 250mm - max width of input material 900mm - min length of the workpiece 800mm in advance: - 2 rows of repellers - pulling shaft, toothed, pressure shaft - repellers - pulling shaft, toothed, pressure shaft - shaft with saws - pulling shaft, toothed, pressure shaft from below: - metal roller, slip - repellers -caterpillar - shaft with saws -caterpillar - smooth regulation of the feed speed on the inverter 0-40m / min - main motors 2x90kW - feed motor 7,5kW - electric body lift up / down 0,75kW - electric shaft adjustment with saws 2×0,75kW - central lubrication - diameter of extraction connection 330mm, 270mm - dimensions length / width / height 3150x2270x2560 ...

Solia M380 with lots of accessories according to the pictures. Disc disc, cube disc, grater and much more.m. Private sale, therefore no VAT. Refundable. No gaantie, but hardly walked and fully functional.

Backflow preventer, Check valve, Reto Stop, DN 250, PN10, VAG, new -20% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is € 3,022 excl. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! Manufacturer date 2018 The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. Soft-seated slanted check valve opens already at small differential pressures. Valve disc can be used on both sides, therefore double service life of the valve disc. The one-piece and all-around EPDM rubberized disc allows a completely free passage and reduces the adhesion of impurities. Suitable for both horizonta ...

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on reques ...

Carousel lathe FKD 40 Face disc diameter 4000mm Turning diameter: 4400mm Turning height: 3000mm Stoessel cross-section: 300mm x 300mm X-axis: Travel ±2200mm Z-axis: Travel 2000mm W-axis: Travel 1200mm Speed of the face disc: 0 – 100 rpm, manual transmission Speed of the Fraeser: 0 – 3000 rpm, manual transmission C-axis in the flat disc table Control: Siemens PickUp Station: 5 places centric load: 35t

Main features : Manufacturer - Spain; The machine is made of 18/8 stainless steel with an anodized aluminum casing; Hardened and chrome-plated cutting disc made in Germany; Automatic sharpening device; Motor cooling fan; Guard for the cutting disc; Cutting thickness: 0÷16mm.; Maximum dimensions of the product for cutting – 270×140mm.; Maximum thickness of the product for cutting – Ø170mm.; Diameter of the cutting disc – Ø250mm.; Power: 0.33 hp; Dimensions: 590/700/425mm.; Weight: 28 kg.;

Corundum disc mill & excenter screw pump Manufacturer: Fryma Type: MK-200 Power: 15 kW with double jacket (heating & cooling) new grinding discs, with new spare grinding disc pair with pressure gauge with vessel (LBH: 730 x 730 x 900 mm) with excenter screw pump: speed-controlled, with sight glass Power: 0.55 kW LBH: 1100 x 230 x 270 mm LBH corundum disc mill: 650 x 450 x 950 mm

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mil ...

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...

Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulu ...

Linck 700 x 100 edger - German production - hydraulic disc shifting TECHNICAL PARAMETERS: - cutting width max 550 mm - cutting height max 100 mm - element width max 700 mm - engine power 22 kW - feed smoothly adjustable from 10 - 60 m/min - working length of the fixed sleeve 120 mm - working length of the movable sleeve 120 mm - minimum element length 600 mm - disc diameter max 350 mm - spindle diameter 55 mm - sleeve diameter 85 mm - spindle with steady rest - two upper pulling rollers - two lower pulling rollers - two auxiliary rollers in the tabletop - feeder length 3700 mm - feeder width 700 mm - four rollers in the table - adjustment of the disc spacing from the feeder - a row of anti-kickback pawls Transport dimensions 380x220x150 cm weight ~ 2000 kg

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-loaded brake, multi-disc spring-loaded brake -Manufacturer: Stromag, hydraulic multi-disc spring-loaded brake -Output shaft conical: Ø 45 - 40 mm -Input shaft bore: Ø3 2 mm -universally applicable -Number: 11x brakes available -Price per piece -Dimensions: 220/190 mm -Weight: 16kg/pcs

Double grinding stand with protective disc and table VEM BS 3-200 max. disc diameter: Ø 200 mm max. disc width: 25 mm 0.5 kW 2850 rpm 220 / 380 V including the following grinding wheels used, tested ! Dimensions: 700 x 600 x 1250 mm

weight 3000kg, working chamber diameter 100cm, disc rotation 2130 rpm. , grinding motor power 90kW grinding disc diameter 98 cm, AISI 304/1.4301 steel 1pc spare grinding disc AISI 304/1.4301 steel Liner Material: Tungsten Carbide Hammer Material Tungsten Carbide classification motor power 15 kW multicyclone 1set AISI 304/1.4301 steel airbag filter 1 set AISI 304/1.4301 steel air duct pipes 1 set AISI 304/1.4301 steel main blower 30 kW Not used

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Magnetic table with electromagnet Magnetic table size 300x1000 mm Longitudinal feed rate 7-23 mm / min Transversal advance -working 0.1 - 8 mm - fast 990 mm / min - manual 0.02 mm / gradation Vertical advance -working 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm - fast 460 mm / min - manual 0.005 mm / gradation Abrasive disc speeds 1450min-1 The dimensions of the abrasive disc 350x40x127mm Electric motor power 5.5 kW motor Electric motor power vertical feed 0.5 kW Transverse feed electric motor power 0.04 kW Maximum load on the table 400 kg The height of the car is 1890 mm Disc balancing device yes Weight - mass 3500 kg Packaging - box dimensions (L x W x H) 2950x2220x2200 mm Standard equipment • Two-axis digital display • Grinding stones • Balancing wheel • Balancing stand • Magnetic plate for fixing • System for demagnetization • Cooling system •  ...

General SKU277U485 LocationBarneveld MakeGlatt TypeP140 Year of constructionunknown: missing typeplate Main Features MaterialStainless steel Motor30 KW Inlet diameter250 mm Specified Features - Noduliser Nodulisercheck Disc diameter1410 mm Disc depth2 mm With outlet100 mm With covercheck Motor30 kW, 380 volt Disc speedmax. 311 rpm MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,3x1,8 m Total height1,6 m Weight2470 kg Extra SpecificationsInlet: 450x410mmNodulisersGlattCompactors > NodulisersBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Motor power: 7.5 HP 380V Cart length: 3,200 mm Carriage width: 405 mm Cutting unit inclination: 0 - 45°. Maximum disc diameter 400 mm Pin diameter 30 mm Scoring disc diameter 120 mm Scoring shaft diameter 20 mm Tilting: Automatic Scoring motor power: 1 HP Max. cutting height: 130 mm at 90° angle 30 mm at 45° angle Disc protection type: Bridge Weight: 1,810 kg Overall dimensions: 3,400 x 3,700 x 1,880 mm possibility of L O A price on request . Panel saw in stock

Description: Motor shaft diameter 20 mm with 6 mm keyway Sanding disc diameter 200 mm Working width 70 mm , Suction mouth diameter 100 mm The disc sanding unit is complete with: Rotation reverser , V.T.V. Electronic speed variator, Disc sanding unit consumption: Suction: 1200 m3/h at 30 mt/sec. , Power: 1.5 Kw Approx. Onsite Dimension. (l x w x h): 1,600 x 1,600 x 1,200 mm, weight approx.: 600 kg

Mikrosa SASL 3/1 workshop overhauled. Condition very good, ready for immediate use. Equipped with loading device for plunge grinding, through-loop grinding optionally possible. The machine has been mechanically and electrically repaired and functionally tested. Specifications Max. workpiece size for grinding wheel Ø 500mm 3.5 - 140 mm Max. workpiece size for grinding wheel Ø 600mm 3.5 – 80 mm Workpiece length max. (plunge grinding) 245 mm Grinding wheel Ø - External 630 mm - Inside 380 mm Grinding wheel width 250 mm Control disc Ø - External 315 mm - Inside 230 mm Control disc width 250 mm Grinding wheels speed 35/45 m/s Control disc speed (infinitely adjustable) 10-480 min¹ Drive power 32 kW Machine weight approx. 4.8 t Control cabinet weight approx. 400 kg The machine can be viewed by arrangement in our factory in Krefeld.

Description: Brand: DELMORINO Model: ARGO Weight: 145 kg Frame: High-resistance steel frame, cut, bent, and welded by robot. Transmission: 2-belt transmission (section B) with screw tensioner. Hitch: 3-point hitch, category 4 PTO shaft. Chipping Blades: 4 reversible chipping blades of high-resistance steel mounted on a ventilated disc. Rotor Access: Quick access to the rotor for easy blade replacement. Chipper Disc: Steel bearing supports, electronically balanced. Hopper: Self-feed (gravity) hopper, chipping disc pulls branches in as it chips, max diameter 10 mm (4 inch). Discharge Height: Material discharge up to 1.5m (5 foot) high and 360° adjustable. RPM: 540 revolutions per minute (RPM).  , Approx. Onsite Dimension. (l x w x h): 1,600 x 1,000 x 1,900 mm, weight approx.: 233 kg

Description: 1700W electric motor Cutting disc with a diameter of 210 mm Durable die-cast aluminum frame Swivel base adjustable in the range -45°/0°/45° Equipped with precise cutting lines for laser marking LEDs for excellent lighting Advancement that allows a cut of 340 mm with the base in the 0° position, setting the base in the 45° position allows a cut of 240 mm Maximum cutting depth: Disc inclined at 90°: 65 mm Disc inclined at 45°: 38 mm Equipped with cutting depth limiter. Extendable worktop The miter saw set includes a miter saw and two cutting discs with a diameter of 210 mm, equipped with 24 and 60 carbide cutting teeth. Approx. Onsite Dimension. (l x w x h): 600 x 500 x 500 mm, weight approx.: 15 kg

Description: serial number AB00022204 Max. panel length mm 3.050 min. panel length mm 200, Max. panel width mm 900 min. panel width mm 80, Max. panel thickness mm 60 min. panel thickness mm 10 max. X axis speed m/min 40, Max.Y axis speed m/min 40 vertical spindles - drilling head F14L (vers. P/PR) no. 8 (5X-3Y) - drilling head F23L (vers.P F23/PR F23) no. 13 (7X – 6Y) horizontal spindles - drilling head F14L (vers. P/PR) no. 6 (2+2X-1+1Y) - drilling head F23L (vers.P F23/PR F23 no. 10 (3+3X-2+2Y) rotating spindles motor power kW (Hp) 2,2 (3) spindle speed rpm 4.200 fixed integrated disc cutter (direction) X max. diameter of disc cutter mm 125 disc cutter rotating speed rpm 5.500 ELECTROSPINDLE motor power KW (Hp) 5,5 min./max. speed rpm 1.000/18.000 tool changer manual max tool diameter mm 20 for futher technical detail please consult document ,PDF STARTE ...

Description: 1700W electric motor Cutting disc with a diameter of 210 mm Durable die-cast aluminum frame Swivel base adjustable in the range -45°/0°/45° Equipped with precise cutting lines for laser marking LEDs for excellent lighting Advancement that allows a cut of 340 mm with the base in the 0° position, setting the base in the 45° position allows a cut of 240 mm Maximum cutting depth: Disc inclined at 90°: 65 mm Disc inclined at 45°: 38 mm Equipped with cutting depth limiter. Extendable worktop The miter saw set includes a miter saw and two cutting discs with a diameter of 210 mm, equipped with 24 and 60 carbide cutting teeth. Approx. Onsite Dimension. (l x w x h): 600 x 500 x 500 mm, weight approx.: 15 kg

Description: 1700W electric motor Cutting disc with a diameter of 210 mm Durable die-cast aluminum frame Swivel base adjustable in the range -45°/0°/45° Equipped with precise cutting lines for laser marking LEDs for excellent lighting Advancement that allows a cut of 340 mm with the base in the 0° position, setting the base in the 45° position allows a cut of 240 mm Maximum cutting depth: Disc inclined at 90°: 65 mm Disc inclined at 45°: 38 mm Equipped with cutting depth limiter. Extendable worktop The miter saw set includes a miter saw and two cutting discs with a diameter of 210 mm, equipped with 24 and 60 carbide cutting teeth. Approx. Onsite Dimension. (l x w x h): 600 x 500 x 500 mm, weight approx.: 15 kg

Kat-No 06-1101-1 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 620 mm in the end Height Zyl: 1000 mm Total height: 1410 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Delivery: immediately from stock. All prices are ex works plus law VAT.  ...

Kat-No 06-1101-3 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 6: 720 mm Height Zyl: 1250 mm Total height: 1660 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. The price is for a tank. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Available in other tank sizes: 300,500,600,800,1000,1 ...

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

Cat. No. 09-1590-1 New Standard: - with residual outlet with inclined seat disc valve DN 50 - with cylindrical conical bottom at the bottom and top - Test pressure: 1.5 bar - permissible operating pressure: 0.49 bar - Material V2A AISI 304 - Surface inside and outside IIIC - With mannhole DN 400 with 6 screws, overpressure valve - Threaded connection connector DN 25 and with inclined disc valve DN 25 Cat. No. Content: Diameter: Ges.Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg On request with (please ask prices): Fermentation spandconnection DN 50 CIP Cleaning Fermented spundar fitting Trial tap For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight c ...

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

Cat. No. 11-3600-1 New V2A storage tank / combination tank / stacking tank with cooling jacket - 1000 + 500 litres Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (Basei): 1000 litres top (stack): 500 litres Base tank height (bottom): 2085 mm Stacking tank height (top): 1050 mm Total height: 3135 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 ...

Cat. No. 11-3600-9 New V2A storage tank / combination tank / stacking tank with cooling jacket standing round on feet Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (base): 500 litres top (stack): 500 litres Base tank height (bottom): 1335 mm Stacking tank height (top): 1050 mm Total height: 2385 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905- ...

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

45 To-Stoessel performance adjustable 45 mm hub adjustable 8-80 mm table size 690 x 410 mm punch mounting 50 mm unloaded 200 mm height 400 mm electric pneumat. Ortlinghaus single-disc clutch and disc brakes with auxiliary brake, Central grease lubrication system, Hohenverstellbar. Report, Wellenrissprufung, see table, UVV - 2014 - still in use ? see operating instructions, Tech.Zustand - good, ready for use

Make SKODA type SUA 125 PA built 1992 place of storage from location country of origin Czech Republic delivery time immediately freight base from location Technical details: turning diameter over bed 1500 mm Turning diameter over support 1100 mm turning length 13000 mm Control SIEMENS 820 T plan disc speed range 0.9 - 315 r pmWork unit weight between tips max. 14000 kg Main drive DC 42 kW Total power requirement 65 kW Machine weight approx. t space requirement approx. m Additional information - CNC control SIEMENS 820 T - increased turning diameter 1500 mm - positioning of the flat disc via M-function or manually in typing mode with digital display - other accessories: + belt grinding device + 2 bezels max. 630mm and 4.8t load capacity + 2 roller blocks max. 950 mm and 7t load-bearing capacity - Hydrostatic main spindle bearing

NEUMASCHINE - Double-sided belt grinding or polishing machine, different Configurations possible - grinding / grinding grinding polishing polishing motor 4 kW, polishing disc max. 120 x 500 mm, max. diameter contact disc 400 mm, grinding belt 50 x 3500 mm; NEW MACHINE

NEUMASCHINE - Double-sided belt grinding and polishing buck, under- Configurations are possible - grinding / grinding grinding polishing polishing motor 4, 5.5 or 7.5 kW, polishing disc max. 120 x 500 mm, max. Contact disc 400 mm, grinding belt 50 x 3500 mm, - 3 different Speeds can be used: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm-1; NEW MACHINE

Attachment polishing machine HAU HR 4 for rotary parts up to max. 200 mm diameter, with 2 processing units, units equipped with overtaken sprueh guns for liquid polishing paste, disc diameter max. 400 mm, disc width max. 120 mm, shaft diameter 35 mm, machine similar illustration; overhauled, ready for use

The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine  ...