disc used for sale

TWIN DISC MG514 marine transmission was built in Belgium. The device working with high- or medium-speed diesel engines used in, for example, tugs or ferries, optimises the control of engine power to increase overall cost-effectiveness, productivity and boat performance. The TWIN DISC MG-514 transmission operates at a rotational speed of 1800 rpm with a ratio of 2.00:1 and has 360 HP of power. The machine comes from an engine in very good condition with which it has worked for a small amount of time. The offered device is fully complete. The total weight of the machine is 525 kg. Technical data of the TWIN DISC MG514 transmission - ratio: 2.00:1 - power: 360 HP - maximum rotational speed: 1800 rpm - oil capacity: 23 l - minimum oil pressure while cruising: 13 bar - overall dimensions (L x W x H): 80 x 80 x 80 cm - total weight of MG514 machine: 525 kg

TWIN DISC MG514 transmission was manufactured in Belgium. Used on high- or medium-speed diesel engines, the machine significantly increases overall boat efficiency and productivity by optimising the control of engine power. The offered TWIN DISC MG-514 marine transmission with a power of 360 HP operates at a rotational speed of 1800 rpm and has a ratio of 2.00:1. A fully complete machine with low mileage, has been used on an engine in very good condition. The total weight of the machine is 525 kg. Technical specifications of the TWIN DISC MG514 marine transmission - ratio: 2.00:1 - power: 360 HP - speed: 1800 rpm - oil capacity: 23 l - minimum oil pressure while cruising: 13 bar - dimensions (L x W x H): 80 x 80 x 80 cm - weight of the MG514 machine: 525 kg

FOUR(4) PCS - MARINE GEARBOX TWIN DISC MG6848SC 2.931:1 MARINE GEARBOX TWIN DISC MG6848SC OVERHAULED COMPLETE WITH NEW HYDRAULIC HOSES AND CONNECTIONS

TWIN DISC MG 527 5.17:1 800 HP/ 596 kW 1800 rpm Brand: TWIN DISC Model: MG 527 Ratio: 5.17:1 Power: 800 HP (596 kW) RPM: 1800 RPM Used Running Take Out Features Flexible Coupling Type of drive: Spider SAE Housing/ SAE 0 Controls 18 inch, rubber block drive Aluminum ring Weight kg 1500 Dimensions (cm) 120x90x100

Twin disc gear box RR 5.5:1 new never used building year 2008

TWIN DISC GEAR BOX RATIO 4.56:1 SERIAL NO 7S-957

TWIN DISC MARINE GEARBOX - MG 5050 - 2.5:1

2 PCS - TWIN DISC MARINE GEARBOX - MG 5202 DC - 5.04:1 - COMPLETE WITH NEW COOLERS AND HYDRAULIC HOSES ALSO AVAILABLE FOR SALE PER UNIT

TWIN DISC MARINE GEARBOX MG 516 RATIO 6:1 RUNNING TASKS OUT IN GOOD CONDITION

TWIN DISC MARINE GEARBOX ,MG 5170 4.5:1 S/N: 3AP-957

GEARBOX INFO Listing ID 20102 Make TWIN DISC Model MG 5202 SC Serial No. 3AE 190 Power RPM REDUCTION 2.48:1 General Info Condition Runner Application Marine Weight (kg) 750 KG

Reference number 20127 Brand Gearbox TWIN DISC Model Gearbox MG 514 C Ratio 5,16:1 Power 380 HP RPM 1800 RPM General condition USED RUNNING CONDITION Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES Controls MECHANICAL SPECIFIC FEATURES Brackets NO Oil cooler NO

Reference number 20130 Brand Gearbox TWIN DISC Model Gearbox MG 518-1 SN 3R4493 Ratio 5,01:1 Power 600 HP RPM 1800 RPM General condition USED RUNNING CONDITION Status AVAILABLE SPECIFIC INFORMATION Flexible coupling YES Controls NO SPECIFIC FEATURES Brackets YES Oil cooler NO Weight (kg) 700 KG

MARINE GEARBOX Reference number 20148 Brand Gearbox TWIN DISC Model Gearbox MG 518-1 Ratio 5,07:1 Power 600 HP RPM 1800 RPM General condition USED RUNNING TAKEN OUT Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE-1 Controls MECHANICAL SPECIFIC FEATURES Flexible Coupling : YES 14 Inch flexible coupling Brackets : YES Oil cooler : NO DIMENSIONS 80x120x125 (on euro pallet) Weight (kg)1200 KG

20157 TWIN DISC MG 507-1 1.77:1 150 HP 1800 RPM RUNNING TAKEN OUT AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls Yes 14 inch MECHANICAL SPECIFIC FEATURES Brackets no Oil cooler no DIMENSIONS 55 X 50 X 55 Weight (kg) 144 KG

20162 TWIN DISC MGX 5135 A 2.52:1 650 HP 1800 RPM CONDITION : NEW AVAILABLE Yes - DIMENSIONS 55 X 50 X 55 Weight (kg) 280 KG

20158 TWIN DISC MG 509 4.50:1 235 HP 1800 RPM RUNNING TAKEN OUT AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls Sae 1 No MECHANICAL SPECIFIC FEATURES Brackets No Oil cooler - DIMENSIONS 60 X 60X 65 Weight (kg) 260 KG

20159 TWIN DISC MG 509 U 1,45:1 235 HP 1800 RPM RUNNING TAKEN OUT AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls - No MECHANICAL SPECIFIC FEATURES Brackets No Oil cooler - DIMENSIONS 60 X 60X 80 Weight (kg) 325 KG

20160 TWIN DISC MG 518 4.67 :1 580 HP 1800 RPM REBUILT/RECON AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls Yes - SAE 1 No MECHANICAL SPECIFIC FEATURES Brackets no Oil cooler no DIMENSIONS 100 X 70X 115 Weight (kg) 1200 KG

20161 TWIN DISC MG 5091 3.82:1 325 HP 1800 RPM RUNNING TAKEN OUT AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls - No MECHANICAL SPECIFIC FEATURES Brackets No Oil cooler - DIMENSIONS 60 X 60X 80 Weight (kg) 360 KG

For sale is a new Twin Disc MG5050SC gearbox with the ratio 3.00:1

power is 620kW @ 1800 arpm

Used Gear Box ratio 4:1

Marine gear box Ratio 4:1

Marine gear box MG 509 USED Ratio 4.17:1 and more ratio's in stock

The Discaf 120-180 kg coffee roaster 2 vaccum Paris T16 packing machines (1 kg, 125g and 250g with the possibility of converting the forming tubes to other weights) Other parts such as: , elevators, mixer, Z-type feeder, etc. http://menparis/en/machinery/t-16-fully-automatic-packaging-machine/ https://www.discaf/mixted-industrial-coffee-roasters-TF-120-300.html

Coffee maker / Coffee maker DISCAF TF-120 Charge / hopper 120-180 kg MIXTED ROASTER TF-120 Machine with a capacity of 120 kg for batch, for to roast automatically the coffee and nuts. Equipment: Load chute. Pneumatic register. Internal drum with motor. Outer drum isolated Swing-bohter triggered through pneumatic cylinder. Pneumatic control box. Smoke aspiration fan. Combustion chamber Husk cyclon. COOLER Coffee cooler, manufactured in stainless steel and with the following elements: Entry hopper. Receiving cylinder. Internal remove blades. Support cylinder. Transmission through motor. Lids with rapid opening closes to facilitate his cleanliness. Inferior trays for the residues captation. Ventilating aspiration. Exit hopper. VERTICAL AUGER FEED ELEVATOR Auger feed elevator. Manufactured in stainless steel and with the following elements: Hop ...

Disc grinding mill, to break the fruit into small pieces and allow easy release of the oil. power 25hp

Te Coop: Endress & Hauser flowmeter DN40 Discomag HI 6530 S De prijs is incl. 21% BTW

Code: 0705 Brand: LANDONIO - ITALIA Model: LAR 600 Double disc sanding machine for working of patterns , moulds, wood pieces , metal and synthetic material Disc diameter mm 600 Motor Hp 6 Table size mm 800 x 300 Tables inclination 0-30° upwards/downwards Disc rpm 950 Spare disc Overall dimensions : mm 1250 x 800 x 1150 h Weight kg 580

Disc grinder, disc grinder, disc grinder, disc grinder, edge grinder, edge grinder -Drive: 2.2 kW 3000 rpm -Plate diameter: 420 mm -Table size: 50 x 420 mm -Dimensions: 1000/600/H1150 mm -Weight: 210 kg

Code: 0166 Brand: LANDONIO LAR Model: LV 800 2-disc sander for wood modelling, aluminium modelling, various materials, custom furniture, nautical furniture Heavy cast iron structure Disc diameter mm 800 Table size mm 980 x 400 Table disc inclination upwards-downwards 45 degrees/45 degrees Motor Kw 4 Disc rpm 950 Built-in vacuum cleaner - Motor Hp 1 Suction mouth diameter mm 120 Overall dimensions mm 1520 x 1050 x 1350 h Weight kg 800

Disc separator Zeno, type ZSS 1200 x 4500, with FE separator and conveyor technology, very good condition Specifications Disc separator with elevation Manufacturer: Zeno Type: ZSS 1200 x 4500 Year of construction: 2015 Grain size: 0-30 mm Working width: 1200 mm Length: 4500 mm Drive power: 3 x 7.5 kW Separate control panel Elevation height: 1000 mm FE separators Manufacturer: Solau Type: DND-AC M5 Working width: 800 mm Drive power: 2.2 kW Self-Cleaning Device – Wiper Conveyor Feed belt Length: 5000 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.3 m/s Discharge belt Length: 3500 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.4 m/s Discharge height: min. 2000 mm Collection belt fraction 0-30 mm under disc ...

Dear customers currently we offer you a used disc or disc grinding machine for model and mold making of the brand HoPa. Here are the technical data of an S 650 machine: Disc diameter: 600mm Table length: 950 mm Table width: 470 mm Table working height: 900 mm Table swivel: 30/45° Schraegan stop: 60/60° Power: 2.2 kW Speed: 1,000 rpm Right-left rotation Emergency stop with engine brake Dimensions: 110 x 85 x 140 cm Weight: 315 kg Documentation incl. CE and declaration of conformity available! Accessories such as inclined stops, adhesives and grinding wheels included. We look forward to your questions and inquiries!

Electric motor with adjustment disc HEW EEXF132M/60 4.8 kW 960 rpm 380 V 3AC shaft diameter: Ø 38 mm Adjustment disc: LENZE 11.213.25.991.500 diameter: Ø 70 / 250 mm internal width: 45 - 85 mm spare part for woodworking machine VENJAKOB VPG 1300x25 ! Retail sale possible, suitable 2nd adjustment disc - see S1937 ! used, tested ! Dimensions: 700 x 380 x 270 mm

Disc brushes, 20 pieces BOTECH 3x Type CBK304-120RA18-S grain: 120, speed: max. 3500 rpm / 3x Type CBK304-120RA18 Grit: 120, Speed: max. 2500 rpm 10x Type CBK305-120LA18 Grit: 120, Speed: max. 2500 rpm 4x Type CBK3023-080RA-18 grain: 80, speed: max. 2500 rpm mount: Ø 25 mm driver bolt circle: Ø 57 mm 2x driver bore: Ø 10 mm disc brushes for metal grinding machine STEELMASTER PROFI SMD545/RTTR !, among others Other quantities on request ! used, tested ! Dimensions ( disc brush ): Ø 152 x 45 mm Dimensions ( packaging ): 430 x 400 x 280 mm

Disc chipper, inlet width = 340x380 mm disc chipper, infeed dimensions = 340x380 mm

2 stubof disc sores WALTER 125 mm, F2052 1 stueck prism fraeser Walter F2052-460 170.6 / 171.2 2 piece disc freser WALTER 142 mm, F252-925

Pictogram disc, escape route sign, 1-sided EATON CEAG GuideLed 30m PL ISO 7010 Article number: 40071354530 max. 28 V DC New ! Dimensions ( pictogram disc ): 325 x 185 x 15 mm Dimensions ( packaging ): 390 x 325 x 20 mm

Adjusting disc, spreader disc KUPPLUNGSWERK DRESDEN Type 313.18.1 diameter: Ø 155 mm TGL 20994 hollow shaft: Ø 18 mm used, tested ! Dimensions: 155 x 155 x 100 mm

Pictogram disc, escape route sign, 1-sided EATON CEAG GuideLed 30m PL ISO 7010 article number: 40071354532 max. 28 V DC New ! dimensions ( pictogram disc ): 325 x 185 x 15 mm dimensions ( packaging ): 390 x 325 x 20 mm

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Disc turret Sauter, mounting 30 mm, diameter outside approx. 340 mm - see pictures

For sale various grinding stones for corundum disc mill KORUMA

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

- Thrust washer axial disc MWM 12302273 - Suitable for several motors - Please note! Price per piece! - 12302273 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and inte ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø300 mm Table dimensions: 170 x 420 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 0.75 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø60 mm Weight: 27 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please  ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø400 mm Table dimensions: 225 x 550 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 1.5 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø80 mm with angle and parallel fence Weight: 55 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If y ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø600 mm Table dimensions: 320 x 830 mm Grinding wheel inclination: +/- 30° Motor power: 1.5 kW Speed: 940 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø100 mm Oyrkh with angle stop with engine brake Weight: 240 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not h ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø900 mm Table dimensions: 450 x 1,200 mm Table extension: 300 mm Grinding wheel inclination: +/- 30° Motor power: 4.0 kW Speed: 600 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø150 mm with angle stop with engine brake Weight: 460 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questi ...