disc used for sale

Load disconnectors, load switches KLÖCKNER-MOELLER NZM4-40 40 A 220...500 V with shift knob and shift linkage 250 mm used, tested ! Dimensions: 180 x 90 x 120 mm

Auxiliary circuit breakers, circuit breakers, circuit breakers, load disconnectors, load disconnectors, circuit breakers, circuit breakers, auxiliary switches, main switches -Manufacturer: Mikron, main switch switch disconnector from CNC milling machine Mikron UME 600 -Adapter: Heidenhain Type: 239 758 01 -Dimensions: 430/150/115 mm -Weight: 1.1 kg

Standard

3 silos, pneumatically fillable, each with a capacity of 69m³, incl. discharge screws. A discharge screw was completely renewed in 2021, which is stored in a hall. The other snails are functional without knowledge of defects, but can be dismantled for inspection. The price is for the complete facility. However, the silos can also be requested individually. Sale of the system may also be in parts. Dismantling / transport by the buyer. On request, support can also be provided with dismantling and loading.

Year: 1996 Courses ( x x y x z ): 300 x 250 x 200mm Table ( x , y ): 600 x 300mm Weight on the table: 300Kg Controller: Fagor V20 Power: 32A Tank capacity: 370L. Tank dimensions: 850 x 530 x 340mm Machine dimensions ( h x w x h ): 2200 x 1100 x 2000mm Machine weight: 1.200Kg Category: Erosions Subcategory: Penetration erosion

It functions, it works properly, it keeps the dimension.

SCHEER saw fully functional, the entire control cabinet is invested, practically new, reliable, can be cut 5 panels at a time

PANHANS ECOPAN Working area 3200x3200 Saw with undercutter, 3 tables with air cushion Full technical documentation Cutting optimization program Opal First owner, machine in continuous operation very little used,

Discharger for 2-component adhesives SULZER MIXPAC® DP 400-85-01 mixing ratio: 1:1 / 2:1 operating pressure: max. 6 bar compressed air supply: max. 8 bar with pressure relief valve ! used, tested ! Dimensions: 480 x 330 x 93 mm

Switch disconnectors, main switches SIEMENS 3KA5330-1AE01 rated voltage: 690 V 3AC rated current: 160 A 50 / 60 Hz number of poles: 3 used, tested ! Dimensions: 185 x 125 x 320 mm

Auxiliary circuit breakers, circuit breakers, circuit breakers, load disconnectors, load disconnectors, circuit breakers, circuit breakers, auxiliary switches, main switches -Manufacturer: Klöckner Moeller, circuit breaker switch disconnector 250A -Type: N 9-250 -Rotary drive: with extension -Total dimensions: 420/140/H260 mm -Weight: 4.8 kg

Switch disconnectors, main switches, emergency stop switches SIEMENS 3LD2264-0TB53 11.5 kW rated voltage: 690 V 3AC rated current: 160 A 50 / 60 Hz number of poles: 3 New, with documents ! Dimensions ( switch ): 163 x 100 x 115 mm Dimensions ( packaging ): 165 x 105 x 120 mm

Description: for small tractors up to 120 cm width The small tractor is not included in the scope of delivery! Approx. Onsite Dimension. (l x w x h): 1,200 x 1,200 x 1,150 mm, weight approx.: 100 kg

Machine : Grinding Wheel Flange Make : and grinding wheels Type: Inner taper mount Pos. Text Stk. φ φ H- Schleifsφ Schl. B φ A 3 58 74 83 400 approx. 320 B ELB 4, 50, 62, 60, 127, 30-50, 170 C ELB 4 44 60 68 127 20-40 180 D 1 45 60 70 127 30-60 190 E 2 27 34 44 approx. 85 -30 130 F 1 45 60 75 127 -50 190 G 1 29 35 44 ca.85 -30 146 H 1 45 60 75 ca.135 -60 180 I 2 45 60 75 127 30-60 180/190 J 2 27 43 56 127 -40 175 K 3 32 32 55 127 20 158 S Grinding wheel : NEW – for a centerless cylindrical grinding machine, Dilvmit+Kircher D- 10C 100/8 Ps V03 , 406x200x203mm ( 270x25x25) Price: € 200,-

Description: Serial number: 366 Table dimensions: approx. 755 x 330 mm Table can be swiveled Usable support width on the table: approx. 285 mm Plate diameter: approx. 600 mm Approx. Onsite Dimension. (l x w x h): 820 x 760 x 1,360 mm, weight approx.: 450 kg

Description: Sanding diameter: 400 mm Table dimensions: 550 x 340 mm Approx. Onsite Dimension. (l x w x h): 650 x 600 x 500 mm, weight approx.: 70 kg

Description: Machine number: 125 Table dimensions: 760 x 300 mm Grinding wheel diameter: 600 mm Approx. Onsite Dimension. (l x w x h): 800 x 800 x 1,300 mm, weight approx.: 250 kg

Description: Machine number: 627 Operating voltage: 380 V Frequency: 50 Hz Connection: 2.25 kW Table dimensions: 800 x 330 mm Grinding wheel diameter: 600 mm Approx. Onsite Dimension. (l x w x h): 800 x 700 x 1,300 mm, weight approx.: 200 kg

SPECIFICATIONS: Equipment: Motorized loading roller conveyor Motorized roller stroke Slide arm with 7 pneumatic grippers Panel saw with a cutting width of 4500 mm Door pad on felt-covered platforms Sliding arm with 8 pneumatic grippers, connected by a continuous rod Lateral alignment device Panel saw width 2500 mm Vibrating chute for picking up and removing waste Shredder WEIMA model WLH300, built in 2007, motor 18.5 kW Unloading gantry 3ERRE AUTOMAZIONI model 1131, built in 2007 - length approx. 13000 mm Pneumatically operated mechanical gripping unit Motorized roller conveyor width 1700 mm length 4000 mm Side stop with idle rollers, side aligner, retractable front stop Motorized roller conveyor, width 1600 mm, length 5000 mm, concealed front stop 2 motorized floor roller conveyors, width 1600 mm, length 5000 mm 4 floor roller conveyors, width 900 mm, length 5000 mm ...

Description: -> built in 1999 -> medium format up to 75 x 105 cm -> with protective enclosure / security fence This transomat was used for unloading a high-speed cutter - standing on the right. The Polar Transomat uses split and undivided layers automatically onto pallets, while at the same time is cut further. As a result, production costs, depending on the cutting program, by 25 -70%. Thanks to the patented, movable pallet tip, the Polar Transomat has a particularly high edge accuracy. Increased productivity: stacking at the same time as cutting Improvement of quality: Particularly edge-accurate stacks can be created directly and faster Process.

General SKU012H032 LocationBarneveld MakeBegerow GmbH & Co. Langenlonsheim TypeBeco Integra Disc 16 / 3x2 F / 3K No.H-2483 Year of construction2006, Filter has never been used Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4435 (316L) FilterStacked disc filter (1x) Filter surfacemax.29,6 m2, Max. Temperature -10/+140 Degr C Information Floor space1,7x1,4 M Total height1,7 M Weight1000 KG Extra Specificationsvessel dia. 1000mm, for 3x2 stacks Inlet dia. 65mm, Outlet 3x dia. 40mm, Vessel capacity 680 Ltr working pressure vac/3 bar (test pressure 7,1 bar), Jacketed vessel working pressure vac/3 bar (test pressure 7,1 bar) Filter cartridges are missing Miscellaneous filtersBegerowFilters > Miscellaneous filtersBrand > Begerow What you can expect from Foeth: -- Machine is in working condition -- At a reduced price co ...

cast iron rupture disc for Favrin folding press gietijzer breekplaten voor Favrin vouwbank dem-rondelles de sécurité en fonte pour plieuse Favrin

For sale is a used mobile/self-propelled stretch robot. The stretch robot is fully functional and in top condition. Hildebrandt laio DISC R501 = Matco EXP600 Instruction manual etc. is included. The stretching robot is characterized by its flexibility, as pallets with special dimensions/oversizes can also be adjusted. The column can be folded down for transport. A video of the robot in action can be sent on request. All prices are subject to 19% VAT.

Metal detector Boekels Discovery C 50x35 -Year of construction 2003 -Passage height approx. 31cm

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Brush segment Quick Snap, brush, plastic brush, nylon brush -Manufacturer: Tennant, brush, 20 nylon with plate unused Ovp -Type: 14967 Disco 20 D = 500 -Quantity: 2x brushes available -Price per piece -Dimension: Ø 500 x 110 mm -Weight: 6 kg / piece

General SKU060F309 LocationBarneveld TypeDiscotherm No.2549.01.01.01.01.2549 Year of construction1990 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2.7 Ltr. Motor1.1 KW Specified Features - Paddle dryer Paddle dryer(1x) make List AG Pratteln Capacity2,7 Ltr Trough sizesdia. 140x190mm With jacket(0,4 Ltr) Max. temperature250 Degr. C. With mechanical sealcheck Motor1,1 KW, 220/380 Volt MaterialStainless steel 1.4435 (316L) Information With switchgearcheck Floorspace0,7x0,6 M Total height0,7 MMinerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedOther chemicalStarchFine chemicalsSugarCosmeticsOther pharmaceuticsOintmentsGeneric medicinesPowdered foodsPaddle dryersFeed additivesCatalysts & fillersListIndustri ...

General SKU258S235 LocationBarneveld MakeEaton Technologies GmbH (D) Type16/3x3/FH01K No.1026491 Year of construction2013 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Liquid outletdia. 50mm Max. temperature-10/140 degr. C Horizontal plate filters InletDN 50 (2x) OutletDN50 (3x) MaterialStainless steel 1.4404 (316L) Information Mounted on legscheck Weight800 Kg CEcheck Floorspace1,2x 1,2 M Total height1,8 M Extra Specificationsbarrel content 806 ltr : without filters Horizontal plate filtersEatonFilters > Horizontal plate filtersBrand > Eaton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

General SKU366S882 LocationBarneveld MakeSchenk Filterbau GmbH (D) TypeZHF SR20 KL No.865 Year of construction1974 Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface20 m2 Cake600 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Filter surface20 m2 Number of platens28 Platen sizesdia. 985mm Between the plates30mm Top connectionsDN80 (1x), DN50 (4x), DN25 (1x) Solids outletDN350 Motor17,5 kW 400/690 volt (Ex) Cake capacity0,6 m3 Centrifugal cake dischargecheck Horizontal plate filters Sieve filtercheck Sieve sizesdia. 985 mm (28x) InletDN80 (1x), DN50 (4x), DN25 (1x) OutletDN350 Capacity1300 ltr. Motor17,5 kW 400/690 volt (Ex) MaterialStainless steel 1.4571 (316Ti) Information Floorspace1,8x1,8 M Total height2,4 M Weight2200 Kg ATEX compatiblecheckHorizontal plate filtersSchenkFilters > Horiz ...

General SKU300P746 LocationBarneveld MakeHet Stempel BV (NL) TypeUnknown Year of construction2013 Main Features MaterialStainless steel Motor4 KW Specified Features - Colloid mill MaterialStainless steel Emulsifiercheck Rotor sizesplate dia.200mm Outletdia.14mm Motor(2x) 4,0 KW, 380 Volt With variable speed drive/ inverter Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,9x0,6 M CEcheck Total height1,5 M Weight230 KGColloid millsHet StempelMills > Colloid millsBrand > Het Stempel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU256N198 LocationBarneveld MakeGMF GOUDA TypeDisc Pastillator DP20/2 No.DP 47-2-1 Year of construction1997 Main Features MaterialStainless steel/Coated Specified Features - Belt cooler Cooling beltdia. 2000mm rotating discs (2x) With motor1,5 kW With scrapercheck Outletdia. 150mm MaterialStainless steel Information With switchcheck Weight6000 KG CEcheck Floorspace6,6 x 3,3 M Total height3,3 MBelt coolersGMF GoudaBelt coolers > Belt coolersBrand > GMF Gouda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

The SCHIESS RF 30 gear hobbing machine is a specialist machine for machining large gear wheels. The machine is designed for machining of gears by processing individual pitches of a gear wheel. The milling machine processes a workpiece with diameter from 60 mm to 3500 mm and a weight of up to 25 t. The spindle of the milling machine rotates at a speed from 6 to 69 rpm. The SCHIESS RF 30 machine is designed for milling with: – cylindrical milling cutters in steel / cast iron up to module: 24/30 – disc milling cutters in steel / cast iron up to module: 33/42 – end mills in steel / cast iron up to module: 33/42 50/65 Technical data of the SCHIESS RF 30 milling machine - largest diameter of the milled workpiece: 3500 mm - llargest diameter of the milled workpiece in the circumferential method and with tooth pitch up to 45 3000 mm - lsmallest diameter of the milled part: 60 m ...

Storti PS 430 medium-size wood cutting line - Italian production - max length of wood 6000 mm - minimum length of wood 2000 mm - wood diameter min / max 100 / 350 mm TECHNICAL PARAMETERS: 1. CUTTING THE PRISM PGS 2004 circular saw Minimum log length 1000 mm. Maximum log length 6000 mm. Maximum log diameter 350 mm. Minimum log diameter 100 mm. Maximum ground clearance 400 mm. Disc diameter 600 mm. Saw hole diameter 40 mm. Saw blade speed 2000/2500 RPM Feed speed 4-35 m/1 min. Spindle motor power 2X37 2X44 KW The opening and closing power of the saw blades is 0.75 KW Log feeding power 4 KW Number of programmable memories for cutting sizes - 9 TGS 84 V double crosscut saw Maximum board width 350 mm. Minimum board width 100 mm. Minimum board height 40 mm. Maximum board height 200 mm. Feeding engine power 0.75 KW Feeding speed 42 m/1 min. Minimum cutting leng ...

VDI 40 for Okuma , angular driven tool holder ( radial ) , clutch Okuma stepped, without internal cooling Type: RGX1-40/251-25/1.2-80JA Warranty: 12 months TURRET TYPE VDI MACHINE MODEL ES L10 II M (DISC) MACHINE MANUFACTURER OKUMA TYPE OF TOOL HOLDER LIVE TOOLS PRODUCT TYPE ANGULAR SHANK SIZE 40 INTERNAL COOLING NO TOOL GRIP DIMENSION ER25 TOOL GRIP TYPE COLLET Transmission ratio 1:1 TORQUE [Nm] 50 Height [mm] 80 Suitable for the following machines Compatible machines OKUMA > ES L10 II M (DISC) > ALL TYPE > ALL TYPE OKUMA > ES L10 II M (DISC) > LIVE TOOLS > ANGULAR OKUMA > LB/LU 300 M (DISC) > ALL TYPE > ALL TYPE OKUMA > LB/LU 300 M (DISC) > LIVE TOOLS > ANGULAR OKUMA > LB/LU 25-M (DISC) > ALL TYPE > ALL TYPE OKUMA > LB/LU 25-M (DISC) > LIVE TOOLS > ANGULAR We sell exclusively to traders Prices are net plus the legal Vat

Description: Working range Axis travel X-axis: 1,800 mm Axis travel Y-axis: 2.000 mm Axis travel Z-axis: 1.100 mm Control Heidenhain TNC 430 NC Rotary Table Pallet size: ,1,400 x 1,600 mm Max. workpiece weight: ,3,000 kg Number of pallets: 2 Tooling system Tool magazine: ,120 places Tool holder: SK50 DIN 69871 Machining head Swiveling milling head (H/V) Main drive Drive power: 30 kW Speed range: 1 - 8.000 min-1 Additional equipment Internal coolant supply: 40 bar Workpiece measurement: Renishaw Tool identification: Balluff Manual control unit Please have a look at our machine video and technical documentation in PDF for more information. The machine has already been prepared for removal and is being sold as defective for a refit. The machine must be collected in week 14! z-motion: 1,100 mm, max. workpiece weight between centers: 3,000 ...

STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...

Number of sanding units: 8 st. sanding width: 180 (260) mm Sanding height max.: 160 mm Dimensions (length / width): 3065x1600x1900 mm weight of the machine ca.: 1500 kg Löwer Leistomad SD Window single wood intermediate sanding machine --------------------------------- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding uni ...

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Workspace: Workpiece diameter: 0.1 mm – 10 mm Smallest feed of the control disc slide (manual): 0.001 mm Disc dimensions: Grinding wheel diameter: up to 150 mm Grinding wheel width: up to 50 mm Control disc diameter: 40 mm Control disc diameter: max. 100 mm Weight: 700 kg The mechanics of the machine have been completely overhauled and are in perfect condition.

Key data: 570 mm, 1000 mm

Weiler E50/1 - CNC lathe - 4-jaw face plate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 5 sets of soft top jaws - fixed bezel - Moving center punch tip MK5 - Mulifix B quick-change holder incl. 10 attachments - Switch-on time 32582 h - Built in 1997 - incl. operating instructions and technical documentation Specification Workspace: - Center width: 1000 mm - Center height: 280 mm - Circulation diameter over bed: 570 mm - Circulation diameter via face slide: 340 mm - Circulation diameter in the recess: 600 mm - Bed width: 350 mm - Sliding distance of the face slider: 340 mm - Displacement of the upper support: 140 mm - Slide length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning chisel cross-section (height/width): 32 x 25 mm Fulcrum shaft: - Spindle head according to DIN 55027: Gr 8  ...

Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - wi ...

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure,, Software path management,, Software end mill (207/208),, Software disc-shaped workpieces on the front side (221/222/223/224),, Software profiled workpieces (233/234/239/240),, Software hogger, hogger profiled (255/256/257/258/260/261/262/263), Software for disc-shaped workpieces (264/265),, Software for end and joint milling cutters (267/268/277/278),, Software step tools (271),, Software scoring saws (299),, Software saws flat tooth (301), Software saws one sided with bevel (302/303),, Software saws alternating teeth (304),, Software saws trapezoid trapezoid tooth (309),, Software saws flat roof tooth (310),, Software saws flat-tra ...

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

Air-controlled cellar unit of the DUOMAT type series, which can be used both in the storage cellar for filter and storage tank charging and in the pressure tank cellar for filler charging. Due to its automatic switching and venting system, the device replaces the manual changeover work of a conventional blending apparatus and thus provides maximum safety and simplification in cellar work. Features: Collecting lantern, two pneumatically operated disc valves for the tank connections, disc valve for manual operation, pneumatic switching pulse generator in connection with float system, control manometer, venting valves on the lantern cover, two additional valves on the inlet connections. All pneumatic elements, compressed air filter with water separator, acoustic signal, control buttons are housed in small stainless steel control cabinet., Additional title: one lantern, Voltage: 220 V, Frequ ...

Description: Electrical Specifications: Output Current: 19.6 A Available for 20 seconds (peak): 40 A Network Frequency: 50 Hz +/- 0.1 Hz (output) Power Factor (cos phi): 0.98 Harmonic Distortion: <, 5% Input Voltage: DC: 50.4 V AC: 230 V Input Voltage Limits: DC: 44...64 V AC (Bypass/Charge Mode): 156...280 V Input Current at Rated Power: 96 A DC Input Frequency: Sell Mode: 59.4...60.4 Hz +/- 0.05 Hz Bypass/Charge Mode (Default): 55...65 Hz Bypass/Charge Mode (Allowable): 44...70 Hz Charging Current: 85 A Performance: Efficiency: 95.6% (Peak) Power Consumption in Search Mode: <, 7 W Environmental Specifications: IP Degree of Protection: IP20 Ambient Air Temperature for Operation: -25...70 °C Electromagnetic Compatibility: Immunity Standards (EN): 61000-6-1 Emission Standards (EN): Residential, Commercial, and Light-Industrial Environments: 610 ...

Description: Supply voltage: 230V/50Hz Motor power: 250W Dry cutting disc dimensions: 150x20x12.7 mm Dry disc minimum speed: 2950 rpm Wet cutting disc dimensions: 200x40x20 mm Oil bath disc minimum speed: 135 rpm Base dimensions: 170 x 130 mm Cardboard dimensions: 29 x 18 x 16.5 cm Power cord length: 1.6m Packaging dimensions: 42 x 27 x 26 cm Approx. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 5 kg

Description: Supply voltage: 230V/50Hz Motor power: 250W Dry cutting disc dimensions: 150x20x12.7 mm Dry disc minimum speed: 2950 rpm Wet cutting disc dimensions: 200x40x20 mm Oil bath disc minimum speed: 135 rpm Base dimensions: 170 x 130 mm Cardboard dimensions: 29 x 18 x 16.5 cm Power cord length: 1.6m Packaging dimensions: 42 x 27 x 26 cm Approx. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 5 kg

Description: Supply voltage: 230V/50Hz Motor power: 250W Dry cutting disc dimensions: 150x20x12.7 mm Dry disc minimum speed: 2950 rpm Wet cutting disc dimensions: 200x40x20 mm Oil bath disc minimum speed: 135 rpm Base dimensions: 170 x 130 mm Cardboard dimensions: 29 x 18 x 16.5 cm Power cord length: 1.6m Packaging dimensions: 42 x 27 x 26 cm Approx. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 5 kg