disc used for sale

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) t ...

Sample system with 10 disc auto counters and a standard bag packaging machine. Suitable to count small parts like screws, fittings, candies, nuts, etc. and pack programmable assortements into pillow or 3-/4-side seal bags. - Systems can be customized regarding the number and size of the counting discs (this samples contains 10 counting discs !). - Packaging machine size and also the total final costs do depend on the required speed , the products to be packed and the bag size. - Available in stainless and painted steel. - Price for sample system only. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are pos ...

Double disc grinding machine

turning length: 3000 mm turning diameter: 800 mm turning dia. in gap: 1000 mm turning diameter over slide: 540 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3820 kg. dimensions: 4800 x 1320 x 1580 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 100mm max - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Rapid traverse longitudinal and face - slip clutch - Cooling device - Quick change steel holder with 4 inserts - Protective device for quick-change tool holder - LED machine light  ...

17,000 LITRE STORAGE TANK/WINE TANK, RIEGER, UPRIGHT MADE OF V2A https://eurolux.de/product/24-0513euba-17000-liter-lagertankweintank-r ieger-stehend-aus-v2a MJ UNI-RILL Tank top floor: Sloping floor with 3 % floor slope 4 reinforcement profiles 2 crane eyelets Threaded socket DN65 reduced to DN50 central downward drawn CIP cable DN50 connection DN 50 front Cylinder: Level indicator with strip and scale Tasting tap DN25 Clear drain with angled seat valve DN 50 Tank underbody: Cone bottom with residual drain pipe pulled forward in the middle with disc valve DN 50 tank wall 4 feet with domes - height adjustable with washers

Format Range: max. 1140 mm, min. 45 mm Features: longitudinal seam, folding bottom, double edge, 4-point gluing, Infinitely adjustable feeder with servo drive, Crop alignment right / left, motorized format adjustment, electronic gluing unit HHS Xpect with 4 application heads, Disc gluing unit left, feeder with vibrator, mini box device, Radio remote control, new servo overhaul (browse) with touch screen, Primary crusher right and left, kickers, counters, digital position indicators, lowerable transport of means in folding, press rolling, Box alignment on the press belt, video surveillance in the transfer station, pneumatic, clocked press belt, new Siemens control system with touch screen, Overhaul 2024: cleaned, checked, painted, new feeder and transport belts. Miscellaneous: The machine can be viewed while it is running by arrangement.

Beer Separator GEA Westfalia GSE capacity 200 hl /h - 2017 This centrifuge has been designed for beer filtration and clarification of beverages. It was manufactured in year 2017 and it has hydraulic capacity 0-200 hl/h. The self-cleaning, disc stack type bowl makes the machine suitable for fully automatic cleaning - in - place (CIP). The bowl is driven by frequency controlled 22 kW AC electric motor which is connected to the bowl with a power belt. Opening and closing of the bowl for discharging the solids takes place hydraulically using water. The product feed and discharge are in a closed system. The product feed and discharges in the bowl are hydrohermetically sealed and do not feature mechanical seals. All product-contacting parts are made of stainless steel; the gaskets conform to the requirements of food operations. The delivery includes separator, valve panel, control panel wi ...

Machine Details Stock number 1105-03806 Machine type CNC lathe - inclined bed machine Make MONFORTS Type RNC 400 AC Year of construction 2001 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from HAGUENAU FRANCE Technical details Turning diameter 420 mm Turning length 600 mm Control SIEMENS 810 D Speed range 70 - 4000 rpm Information With C axis and driven tool holders Tool carrier disc turret VDI 40 (12pcs), bore 40 mm; Power clamping futte DIA 315 MM, chip conveyor coolant device, TAILSTOCK CNC SIEMENS 810 D 24 KW 4000 RPM good condition WITH ACCESSORIES

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 870 mm turning diameter over slide: 420 mm turning speeds: 36 - 1600 U/min quill:: 5 MK quill travel: 150 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3990 kg. dimensions: 4500 x 1280 x 1650 mm - Versatile applications in general mechanical engineering, production, individual production - The machine bed, cast in one piece, is extremely torsion-resistant and+ low-vibration, which is an essential requirement for accurate turning is fulfilled - Modern main spindle bearing with precision angular contact ball bearings - Central, handy circuit for feeds and threads, with control and pull spindle - Serially with rapid traverse longitudinal and plan to reduce non-productive times - The gears are oversized, hardened and precision ground - The removable bridge al ...

max. wheel diameter: 330 mm gear width: - mm max. module: 7 min. module: 0,5 Control: Siemens 840 C total power requirement: 72 kVA weight of the machine ca.: 11,7 t dimensions of the machine ca.: m We offer a Pfauter model G 320 gear grinding machine for sale numerical control on 8 axes for the machining of gears with straight and helical toothing, with rolled profile for enveloping cuts, the one Worm profile disc used. Technical specifications: CNC control Siemens 840 C Controlled axes: X Radial axis Y Tangential Shift Z Vertical axis A Workhead rotation B Worm rotation during processing C Table rotation U Radial axis dresser V Tangential axis dresser Module 0.5 – 7.0 Minimum workpiece diameter 10 mm Maximum workpiece diameter 330 mm Number of teeth 10 - 600 Vertical carriage thrust Z 200 mm Horizontal grinding wheel - carriage stroke X 230 mm Tangential slide stroke Y 135 mm Angle o ...

Code: 0260 Brand: OMMA Model: FTF 1400/2M - CE Standard Automatic 4 rollers glue spreader for wood panels, laminates, technical panels, foam, soundproofing, plasterboard, doors etc. - CE Standard Technical data: Rigid and solid frame Working width mm 1360 Max working thickness mm 80 Working table height mm 905 Diameter of rubber coating rollers mm 250 Diameter of dosing rollers chromium plated mm 185 Installed power Kw 1,1 Dosing rollers chromium plated. These rollers can be easily cooled with cooling device "CRIO" Electronic variable working speed with display Analogic dial of the distance between the spreading rollers with 1/10 mm reading precision High uniformity of the spreading on full working width Motorised rotating disc ejector Stainless steel collecting tank of the cleaning water Cooling device "CRIO" to maintain the original glue characteristics in term ...

Description: Disc diameter 1200 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 1,200 x 1,150 mm, weight approx.: 50 kg

offer 21322 Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1100 mm -Mot. Dust extraction - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1250 x D 600 mm - Weight approx. 150 kg

offer 21055 Double polishing block Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1100 mm -Mot. Dust extraction - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1250 x D 600 mm - Weight approx. 150 kg

Tool grinding machine, drill bit grinding machine, grinding machine; -Manufacturer: FAMO Fr. Aug. Münzenmaier Maschinenfabrik; -Type: ST/100V; -1 disc diameter approx. 320 mm; -1 cup discs diameter approx. 240 mm ; -Table: approx. 550 x 340 mm.

Technical data for the shelf connector: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Set Spacer NR screwed L300, new consisting of: 01x Spacer NR L=300, sendz 02x hexagon screw 8.8 M10x25 galvanized 02x tooth nut 6-edge 8.8 M10 flange verz. 02x flat disc M10 galvanized

offer 22431 Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 76 mm - Disc speed 2900 rpm - Working height 1100 mm - Original machine stand - Drive 400 V / 1.8 kW - Space requirement approx. W 800 x H 1150 x D 450 mm - Weight approx. 150 kg

disc diameter approx. 400 mm.

Size Dn 350 Pressure class Pn10/16 A150 Body Steel Gjs 400 used Tractor No. B21-047508 Disc Stainless steel Cf 8m P.max bar 16 Bar Temp Min -10 Max 130 Pneumatic double acting Year of construction 2021 Epdm session

Machine Details Stock number 1105-03812 Machine type CNC turning and milling center Brand GILDEMEISTER Type CTX beta 500 Year of construction 2014 Control type CNC Control 840 D SL SIEMENS Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from site Price Technical details Turning diameter 410 mm Turning length 850 mm Control 840 D SL SIEMENS Circumferential diameter over bed 500 mm Speed range - main spindle 25 - 5,000 min/-1 Drive power - main spindle 25 / 34 kW torque 280 Nm C-axis 0.01 ° Spindle nose 170 h5 chuck diameter 210 mm Chuck diameter 250 mm Spindle diameter in the front. Bearing 130 mm Spindle bore 87 mm bar diameter 77 mm Number of tool positions 16 pos. Number of driven tool stations 16 pos. Drive power applied WZ stations 11.3 kW Speed range - antr. Tool stations max. 4.000 min -1 Tool holder VD ...

Sweeper station wagon, probably ex Carraro consisting of front mounted sweeper, PTO drives with its own hydraulics, 3 disc brooms, coupling triangle holder, height-adjustable support wheel. Semi-trailer suction container, hydraulically operated, hydraulic tipping emptying, with elbow, without connecting hose and with semi-trailer chassis. The station wagon is from municipal pre-ownership, not tested and is sold as available as defective.

Control: Siemens type 840D, shift utilisation: 3 shifts. Grinding disc diameter: 610mm, max. speed: 50m/s, weight: 8000kg, year of manufacture: 2009. Filter system: RESY Filtration, System: 68/500-LA-8-0, Year of manufacture: 2017, Capacity: 8000l. Accessories: Shaker, conveyor belt.

Blanco food serving with glass structure Blanco food dispenser refrigerated display case 40 mm granite table top Bianco Berrocal Front fairing beech fated Tray/disc chute Power supply: 230 V with lighting Metrics: Width: 254 cm Depth: 80 cm Depth with plate slide: 110 cm Height: 190 cm Information on cooling: Without compressor unit / refrigeration unit Centrally cooled for connection to external refrigeration system Last exam 09.2022 More food editions - new and used - can be found in our shop! International shipping costs on request!

Sharpening machine for profiled cutters Tool diameter max 290 mm Width of tool max 230 mm Control manually Number of cutters max 931 Disc diameter max 225 mm Back clearance angle 30 ° Side clearance angle up to 20 ° Accuracy per 1000 5 mm Main motor power 1,1 kW Stepless rotational speed control Total connection 1,5 kW Weight 780 kg Space required: Length 1.650 mm Width 1.100 mm Height 1.080 mm

: gebraucht : 2007 : 5533 : prompt, Zwischenverkauf v : Italien : 5460 € : 1 : 178 x 78 x 78 mm : 2840 1/min : 250 x 150 mm : 2.2 kW : 830 mm : 750 mm : 1630 mm : 400 kg Cooling Equipment Distance column axis - disc axis 300 mm Max. Distance table - grinding wheel 280 mm Max. Grinding surface 140 x 330 mm Quick feed / handwheel rotation: 2 mm Fine feed 0,01 mm Dimensions of the abrasive elements 50x16x90 mm no User Manual DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dissolver Drais RN-PI EX protected version Power 6,8 kW/ 0,75 kW Speed range 0-4000 1/min Toothed disc 20cm Very good condition, straight from production!

Vertical pot sanding machine DELTA LF 350 Grinding length approx. 350mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2800 rpm Drive power approx. 3Kw Grinding movement right / left - manual Z -Delivery Manual Accessories: Magnet Documentation Wet grinding device 2 x pot disc Puller Grinding wheel protection Fine adjustment Z-axis Dimensions: LxWxH approx. 1x0.8x1.8 meters Weight approx. 600Kg

WMW cylindrical grinding machine B0pedtl283 Type SA(U) 200x800 Grinding diameter approx. 220mm Grinding length approx. 800mm Infinitely variable speed regulation/headstock Coolant device Grinding wheel puller Work lamp Various grinding wheels and disc flanges Dimensions approx. LxWxH 3x1.5x1.7 meters Weight approx. 3000kg

SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...

Specifications: - Grinding wheel diameter approx. 175 mm - Disc speeds 2820 rpm - Support table left height adjustable + laterally movable + rotatable -Lighting - Drive 400 V / 0.75 kW - Space requirement approx. W 1050 x H 1350 x D 650 mm - Weight approx. 120 kg

Type SM/1400 Working width 1400 mm Working length 3500 mm Working thickness 5-150mm Sanding roller speed control 420-960rpm Feeding speed 0-30 m/min Total motor power 35,7 kW Disc motor 5,5 kW-2 Cross motor 0,37 kW -2 Feeding power 1,3 kW Up and down motor 0.25kW-2 Vacuum table (no hoses) Made in Italy 1988m/y/ g Transport dimensions 5200x2900x1900mm Weight 3100 kg Price 7999 Eur (EXW Jonava, Lithuania)

Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure., Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Grinding wheel holder:: HSK 50 E, Diamond grinding wheel diameter: 50 - 250 mm, max. width of grinding wheel: 70 mm, Grinding wheel bore diameter: 20 mm, Speed of ...

Connection IMA – HSK 63F Gear ratio 1:1 Max. speed 14,000 rpm Bore for saw blades or disc cutters 22 mm Tactile diameter. inside approx. 130 mm Note: Plastic coating probe ring is missing Sensing distance approx. 5 mm

The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Lapping is a type of processing being part of the finishing operations of the metalworking industry. There lapping of metal pieces is carried out on an industrial level with special dedicated machines called precisely lapping machines, you will find a wide selection of used lapping machines. Lapping is a surface finishing operation consisting of sliding a disc on the work piece of pearlitic cast iron or bronze or copper

Format range: max. 740 mm (can be extended to 1040 mm) min. 50 mm Equipment: Longitudinal seam, disc gluing unit on the left, vibrator, cutting alignment according to the feeder, Primary crusher right and left, kicker, counter, digital position indicators, motorized, extended transfer station, Press belt with pneumatic pressure adjustment, main drive with Frequency. Overhaul 2023: cleaned, checked, painted and with new feeder and transport belts, as well as new press belts. Other: The machine can be viewed while running by appointment.

WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...

WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...

AGG 600_SSK0 Achievement: PRP: 600.0 kVA / 480.0 kW / 866 A ESP: 660.0 kVA / 528.0 kW 50 Hz 400 volts Disposals: Terminal strip 3-pole, neutral conductor, grounding. Engine: Scania DC16 093A 02-54 Power: 545.0 kW Cylinders: 8 Cooling water capacity: 68.0 l Oil volume: 48.0 l incl. starter battery 24 volts Generator: Nidec TAL Series 600 kVA 1 Bearing Synchronous generator with AVR voltage regulation, directly with Steel disc clutch flanged to engine. Construction: NEA in soundproof hood with 990 l base frame tank. Control: Comap InteliLite AMF25 automatic emergency power incl. battery charger and cooling water heater, for automatic start in the event of a power failure (without power switching, not synchronizable), with shutdown in case of overtemperature and lack of oil pressure. Digital display of voltage, frequency, operating hours, 3x phase curren ...

AGG 465_PSK0 Achievement: PRP: 465 kVA / 372 kW / 671.97 A ESP: 509 kVA / 407.2 kW / 735.55 A 50 Hz 400 volts Disposals: Terminal strip 3 phase, neutral conductor, grounding. Engine: Perkins 2506A-E15TAG1 Power: 451 kW RPM: 1500 Cylinders: 6 Cooling water capacity: 58 l Oil volume: 62 l incl. starter battery 24V Fuel: Diesel Generator: WEG 465 kVA 1-Lager Synchronous generator with AVR voltage regulation, directly with Steel disc clutch flanged to engine. Construction: NEA in soundproof hood with 680 l base frame tank. Control: Comap InteliLite AMF25 automatic emergency power incl. battery charger and cooling water heater, for automatic start in the event of a power failure (without power switching, not synchronizable), with shutdown in case of overtemperature and lack of oil pressure. Digital display of voltage, frequency, operating hours, 3x phase ...

Currently in stock! AGG 300_SSK0 Achievement: PRP: 300.0 kVA / 240.0 kW / 433.0 A ESP: 330.0 kVA / 264.0 kW 50 Hz 400 volts Disposals: Terminal strip 3 poles, neutral conductor, grounding. Engine: Scania DC 09 072A 02-13 Power: 261.0 kW Cylinders: 5 Cooling water capacity: 37.0 l Oil volume: 36.0 l incl. starter battery Generator: Nidec TAL series 300 kVA 1-bearing Synchronous generator with AVR voltage regulation, directly with Steel disc clutch flanged to engine. Construction: NEA in soundproof hood with 990 l base frame tank. Control: Comap InteliLite AMF25 automatic emergency power incl. battery charger and cooling water heater, for automatic start in the event of a power failure (without power switching, not synchronizable), with shutdown in case of overtemperature and lack of oil pressure. Digital display of voltage, frequency, operating hour ...

Table length = X approx. 350 mm Table transverse travel = Y approx. 80 mm Table vertical travel = Z 170 mm Table size 400 x 110 mm Spindle mount MK 2 12 spindle speeds 400-4000 rpm. Drive power max. 0.75 kW Power supply 400 V / 50 Hz Vice Horizontal milling spindle with disc cutter, Connection cable with CEE 16 Amp. Plug

Brake boring device Hunger 6.5 A 400 V System Brake drum & disc with accessories Grinding spindle Safety grilles

Disc lathe Lathe for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model: ERSP / ER/Sp 4 Workpiece diameter: max. 400 mm Workpiece thickness: max. 80 mm

: neu : 2023 : 5535 : prompt, Zwischenverkauf v : Italien : 13600 € : 1 : 1300 mm : 150 mm : 150 mm : 250x350 mm : 945 mm : 0.75 kW : 1400 mm : 1000 mm : 1450 mm : 300 kg Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: The grin ...

Disc size: ø 315 mm x 40 mm, bore 75 mm Motor power: 1.1 kW Weight, approx.: 270 kg Dimensions (WxDxH), approx.: 980 x 600 x 1210 mm Equipment: - 5 new discs

Gate valve Inter APP FESTO: 2104682033 N409 DE-CS16 76428A DN 150 PN Multi 10 bar VZAV-C-150-10 S8PN16-H1EP200 V5-V3 E_DX5EX4 Body Disc 2KR/400 Liner EPDM Shaft 14021

Disc grinding machine Grinding machine for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model No.: PQ-4 Year of construction: 1982

Brush sanding machin with 3 working units. Machine has only a few operating hours. 1st working unit: - 5 rotating heads with 3 discs each - disc diameter 125 mm - quick change of the discs - motorized height adjustment 2. Station: - brush with diameter 300 mm - motorized height adjustment - Electronic inverter 4 kW 3. Station: - brush, diameter Durchmesser 300 mm - motorized height adjustment - Electronic inverter 4 kW - Rotative blower cleaning panel - Touch Screen IPC COMPACT 8,5 - conveyer with vacuum table - vacuum fan 7,5 kW - Vorschubgeschwindigkeit wird über einen FU geregelt - conveyer electronic inverter 2,2 kW - Producer Viet - Type Opera 5-3.3 XLL - Working width 1.350 mm - Year of construction 2018 - Working height 900 mm - Max. part height 200 mm - Vacuum transport belt - Operating side, left - Standort, nicht am Lager in Litauen - Voltage / HZ 400/50 - Spannungssch ...

turning length: 1500 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25-220/220-1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 185 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 quill:: 5 MK weight of the machine ca.: 2420 kg. range L-W-H: 2840 x 1150 x 1610 mm Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 120mm max - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - First fill with Shell Tellus 46 - Clamping disc 450 mm - 2 center points - Frequency converter - Digital speed display - slip clutch - Rapid traverse longitudinal and face - Cooling device - Quick change steel holder with 4 inserts - ...