dimeco decoil straight used for sale

Straightening and welding plate SIEGFRIED WEYRAUCH GemmingenCast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmwidth 800 mmthickness 28/125 mmworking height approx. 850 mm- feet with adjustment screws for aligning the plateWeight 370 kggood surface; used

Wire gauge range: 1.5 - 7.0 mm Section lengths: up to 8,000 mm Feed speed:

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 240 mmWorking height: 850 mmPanel thickness approx. 30 mm throughout- 5 pieces height-adjustable feetWeight: approx. 1000 kgGood surface; used

Straightening and welding plate made of steel, solid materialMachined steel plate from a tool rackLength 2980 mmWidth 1380 mmThickness 74 mm- Full steel plate- Surface milled- 4 pieces screwed trailer blocks- Plate provided with some symmetrical holesWeight approx. 2380 kg; used

Ungerer 1800 x 5 mm Max sheetwide: 1800 mm Max sheetthickness: 0,7 > 5 mm Max speed: 16 m/min Number of flattingcoils: 9+8 rolls (dia 55 mm) Power : 28 HP Weight: 9,7 ton

Straightening and welded plate made of steel, solid materialMachined steel plate from a tool rackLength 2980 mmWidth 1580 mmThickness 94 mm- Full steel plate- Surface milled- 4 pieces screwed trailer blocks- Plate provided with some symmetrical holesWeight 3400 kg; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedheavyheavy, straightening plateLength: 1985 mmWidth: 1000 mmThickness with ribs: 220 mmWorking height: 860 mmPanel thickness: approx. 35 mm throughout- 4 pieces height-adjustable feetWeight 1050 kg; used

Ungerer RP 1500 x 3 mm Max sheetwide: 1500 mm Max sheetthickness: 3 mm

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmwidth 1000 mmthickness 160 mmworking height 850 mmplate thickness approx. 35 mm throughout- 3 pieces height-adjustable feetWeight with feet 680 kggood condition; used

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening platelength: 2000 mmwidth: 1000 mmthickness: 260 mmworking height: approx. 850 mmplate thickness: approx. 40 mm throughout- 5 pieces, height-adjustable feetWeight with feet: 1250 kggood condition; used

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 1600 mmWidth 1000 mmThickness 210 mmPanel thickness approx. 32 mm throughoutTable height / working height 565 mm- very stable steel table substructure (self-made)- plate with substructure can be moved by pallet truckWeight 740 kggood condition; used

CONTROLS    SIEMENS S5 DECOILER   sheet width max.: 370 mm   sheet width (min): 80 mm LEVELLER UNIT   sheet thickness max.: 2.5 mm   sheet thickness min.: 1 mm ELECTRICAL SPECIFICATIONS   mains frequency: 50 Hz

Straightening and welding plate Cast steel-Grey cast iron heavily ribbedCast plate, heavy straightening plateLength 1500 mmWidth 1000 mmThickness 100 mmPanel thickness approx. 37 mm continuousTable height 860 mm- Table base made of steel (self-made)Weight 640 kgGood condition; used

Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton

Key data: 300 t

300 T Gantry Straightening Press – Gantry Press – 3,000 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic gantry press with a pressing force of 300 t for straightening, assembly and machining processes on large-format components. Base price: 102.000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with T-slots according to DIN 650 75 mm table top Servo hydraulic ...

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1500 mmThickness 125 mmBoard thickness approx. 40 mm continuousTable height 880 mm- Table base made of steel (self-made)Weight 1700 kgGood condition; used

Key data: 300 t

300 T Gantry Straightening Press – Gantry Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic gantry press with a pressing force of 300 t for straightening, assembly and machining processes on large-format components. Base price: 142.000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with T-slots according to DIN 650 75 mm table top Servo hydraulic ...

double wire processing diameter range 0,8-2 mm cutting length 1000 mm speed - meters/min 80

diameter range 4-10 mm cutting length 3000 mm speed - meters/min 130

diameter range 7-14 mm cutting length 3000 mm speed - meters/min 90

diameter range 5-13 mm cutting length 2000 mm speed - meters/min 21 - 90

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 22-71

diameter range 1-8 mm cutting length 3000 mm speed - meters/min 13-56

flying shears diameter range 8-16 mm cutting length 520-6000 mm speed - meters/min 25-75 diameter range 8-14 mm

Code: 0280 Brand: DIMA CEFLA Model: KLEIN/S - CE Standard Universal sanding machine for straight and curved pieces of wood, furniture, doors, frames, panels, composite materials and various - CE Standard Brush diameter 200 mm - Height adjustable shaft Sanding disc diameter 230 mm Motor 2,2 Kw Electronic speed variator Work surface dimensions 1400 x 920 mm Work surface dimensions with extensions 2200 x 1200 mm Work surface height 900 mm Suction inlet diameter 150 mm Overall dimensions mm 1600 x 1100 x 1150 h Weight kg 900

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

diameter range 1,5-7 mm cutting length 2000 mm speed - meters/min 90

wire diameter range 1,5-7,0mm cutting length 3000 mm speed - meters/min 5-120

Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 120

Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Ejector stroke in ram: 150 Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, shaft straightening system -Pipe straightening system for: steel pipes or shafts, flame straightening with water cooling -Drainage channel and water pump -2x: Counter-holder prism -Counter bearing: adjustable -Dimensions: 4000/870/H810 mm -Empty weight: 500 kg

Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press -Bending/straightening press: hydraulic profile bending machine -Base: solid construction, mobile -Hydraulic unit: unfortunately without type designation -Piston rod: Ø 55 mm / stroke: 200 mm -Individual components: see photos -Total dimensions: 1180/1060/H1000 mm -Weight: 445 kg

Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Key data: 300 t

For sale is a hydraulic gantry straightening press (H-frame) from the manufacturer Durendus with a maximum pressing force of 300 T. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 1,000 mm and a stroke of up to 600 mm, making it particularly suitable for straightening, tuning and heavy forming work in industrial use. Technical data + information: Hydraulic gantry straightener – H-frame – 300 t 1,500 × 2,000 mm General information - Name: Hydraulic portal straightening press - Type: H-frame / portal press - Manufacturer: DURENDUS - Press force: 300 T (adjustable) - Distance between the stands: 1,580 mm - Table size: 1,500 × 2,000 mm - Bridge travel: 1,500 mm - Lateral travel (center): ±500 mm - Max. installation height: 1,000 mm - Table height from the ground: 950 mm - Plunger extension: 200–400 mm - Total weight: approx.  ...

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Key data: 25 t

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Key data: 200 t

DURENDUS DPS-200 – Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm The machine shown here has already been built and delivered on behalf of a customer. We can remanufacture this machine for you at very short notice. It is a hydraulic gantry straightening press from the manufacturer DURENDUS with a maximum pressing force of 200 t. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm and a stroke of 400 mm, making it ideal for straightening work, press-fit processes as well as applications in steel construction and toolmaking. Technical data + information: Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm General information Manufacturer: DURENDUS Model No.: DPS-200 Type: Gantry press / H-frame Press force: 200 t (adjustable) Total weight: approx. 8,500 kg Dimensions (W × D × H): approx.  ...

LARA DEMAE-10000/100/1400-D feeder/unwinder/straightener – Year 2018. Reviewed, ready for production. Complete feeder from coil, integrating unwinding, straightening and servo-driven feeding in a single compact unit. Designed to work continuously on cutting, stamping or drawing lines, with high precision and reliability. Robust equipment, ideal for carbon steel, stainless steel and aluminum. Composed of: Motorized hydraulic winder, combined straightener-feeder and integrated electrical and hydraulic system. Main technical data: -Maximum strap width: 1,400 mm -Sheet thickness: up to 3 mm (carbon steel/aluminum) up to 1.5 mm (stainless steel) -Power supply: 400 V / 50 Hz -Hydraulic pressure: up to 130 bar

Key data: 200 t

Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Welding table / straightening table - Panel thickness 80mm - Panel thickness incl. frame 360mm Table length 4900 mm Table width 1300 mm Table height 980 mm Machine weight approx. 5.6 t Dimensions L x W x H 5.0 x 1.3 x 0.6 m Auction-ID: A7-46642-34

Model: Fine AH 636c (also called AHSI 636c) Type: Straight Grinder / Stick Grinder Power: 280 W Voltage: 220/230 V, 50/60 Hz No-load speed: approx. 5,500 rpm Tool holder: Gear ring drill chuck up to Ø 10 mm Max. abrasive media: Ø 50 mm Weight: approx. 1.7 kg Cable length: 3 m Use: Brushing, polishing, grinding, light drilling work Weight incl. packaging approx. 3kg Auction-ID: A1-46686-51