dimeco decoil straight used for sale

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 640 x 635 mm height: 145 mm used ! Dimensions: 640 x 635 mm x 145 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Straightening Table PAGUS 2000 x 680 mm Height: 840 mm Dimensions: 2000 x 700 x 850 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 400 x 400 mm Height: 100 mm used ! Dimensions: 400 x 400 x 100 mm

Welding table, straightening table, straightening plate, work table, clamping table straightening plate PAGUS 1000 x 800 mm without feet Dimensions: 1000 x 800 x 250 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 395 x 195 mm Height: 80 mm used, tested ! Dimensions: 395 x 195 x 800 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate PAGUS 1000 x 630 mm Height: 860 mm Dimensions: 1000 x 630 x 860 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 205 x 205 mm Height: 85 mm used, tested ! Dimensions: 410 x 205 x 85 mm

Key data: 180 mm, 2 mm, 19

Sheet metal straightener with strip puller max. belt width 180 mm Straightening rollers - 19 pcs Roller diameter - 18 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Straightening Table, Spotting Plate PAGUS Work surface: 200 x 200 mm Height: 80 mm used, tested ! Dimensions: 390 x 200 x 100 mm

Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 300 x 300 mm Height: 100 mm used ! Dimensions: 300 x 300 x 100 mm

Dematic roller conveyor right with straight section 1000-90°-500-440 IR795 RA2356 Make: Dematic Direction of rotation: 90° right-running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm Length of straight section: 1000 mm Frame height: 132 mm Overall height including motor: 275 mm Conveying speed: 0.33 m/s Drive type: Round belt Electrical details: Motor type: SEW geared motor Motor power: kW 0.25 380V Optional: Supports Side guides Frequency converter for stepless speed control convertion to left Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For ind ...

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 300 x 300 mm Height: 100 mm used ! Dimensions: 300 x 300 x 100 mm

CONTROLS   PLC SIEMENS S5 115 U OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 350 mm   sheet thickness max.: 8 mm   coil weight max.: 4 to   feed velocity max.: 10 m/min   feedstock transport direction: left to right DECOILER   design: single reel   sheet width max.: 350 mm   coil weight max.: 4 to   max. diameter of coil: 1500 mm   mandrel expansion range from: 370 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 10 m/min LEVELLER UNIT   sheet width max.: 350 mm   sheet thickness max.: 8 mm   number of leveller rolls: 21   diameter of leveller rolls: 50 mm   number of infeed-/outfeed rolls: 2   diameter of feed rolls: 120 mm   feed velocity max.: 10 m/min ELECTRICAL SPECIFICATIONS   total power consumption: 38 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 13000 k ...

Welding table, straightening table, straightening plate, work table, clamping table straightening plate, leveling table,spotting plate PAGUS work surface: 300 x 300 mm height: 90 mm used, tested ! Dimensions: 300 x 300 x 90 mm

Welding table, straightening table, straightening plate, work table, clamping table straightening plate, leveling table,spotting plate PAGUS work surface: 630 x 630 mm height: 140 mm used, tested ! Dimensions: 630 x 630 x 140 mm

Welding table, leveling table, straightening plate, work table, clamping table leveling plate, leveling table,spotting plate PAGUS work surface: 640 x 635 mm height: 110 mm used, tested ! Dimensions: 640 x 635 x 110 mm

CONTROLS   PLC OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min CROP SHEAR   sheet thickness max.: 4 mm   working width max.: 530 mm   stroke rate (max.): 20 /min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of leveller rolls: 56 mm   diameter of feed rolls: 150 mm   feed velocity max.: 20 m ...

Welding table, leveling table, straightening plate, work table, clamping table leveling plate, leveling table,spotting plate PAGUS work surface: 500 x 400 mm height: 70 mm used, tested ! Dimensions: 500 x 400 x 70 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 630 x 400 mm Height: 130 mm used ! Dimensions: 630 x 400 x 130 mm

pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 3000 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 500 x 500 mm height: 120 mm used ! Dimensions: 500 x 500 x 120 mm

Straightening and welded plate cast steel-grey cast iron strongly ribbedLength 2000 mmWidth 1200 mmThickness 150 mmWorking height 800 mmPanel thickness 35 mm- Substructure made of solid woodWeight approx. 950 kgGood surface; used

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 800 x 630 mm Height: 170 mm used, tested ! Dimensions: 800 x 630 x 170 mm

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavy straightening plateLength 3050 mmWidth 2000 mmThickness 300 mmPanel thickness approx. 55 mm throughoutWeight approx. 4.5 ton.Good condition; used

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Straightening Table PAGUS Work surface: 1600 x 1000 mm Height: 770 mm used, tested ! Dimensions: 1620 x 1010 x 800 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work Surface: 410 x 410 mm Height: 105 mm Heavy Duty Version Dimensions: 410 x 410 x 105 mm

Belt width 350 mm Number of straightening rollers - 11 pcs Diameter 60 mm Capacity 350 x 2.5 mm Motor 4 kW Speed adjustable by variator drive

Welding table, straightening table, straightening plate, work table, clamping table straightening plate, leveling table,spotting plate PAGUS work surface: 800 x 630 mm height: 170 mm used, tested ! Dimensions: 800 x 630 mm x 170 mm

length: 1200 mm width: 800 mm table height: 880 mm Plate thickness: 60 mm weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,20,80,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Straight and cut machine Wafios R31 Diameter: 1-5mm – 7mm MY: 1993 – working condition Machine Number: 26106224 Extension length: 2m or 6m available Pay-Off: not available, we can offer separate for 3t. Mechanically refurbished Electrical checked Machine is in working condition

CONTROLS   PLC SIEMENS S5 115U OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 140 mm   sheet thickness max.: 6 mm   coil weight max.: 3 to COIL CHAIR   coil weight max.: 3 to   stroke: 500 mm DECOILER   design: single reel   sheet width max.: 300 mm   coil weight max.: 3 to   max. diameter of coil: 1300 mm   mandrel expansion range from: 360 mm   mandrel expansion range up to: 430 mm LEVELLER UNIT   sheet width max.: 140 mm   sheet thickness max.: 6 mm   sheet thickness min.: 3 mm   number of leveller rolls: 21   diameter of leveller rolls: 50 mm   feed velocity max.: 43 m/min ELECTRICAL SPECIFICATIONS   total power consumption: 35 kW KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Key data: 3 mm, 3000 mm, 130 m/min

One used Ravni starigtening and cutting machine for 3.0 to 8.0mm wire. Cutting length: 3.000mm Machine is equipped with double pay off for 3 t spools and dust abstructor Year: 2014

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton

OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 16 mm   coil weight max.: 8 to   feedstock transport direction: left to right COIL CHAIR   coil weight max.: 8 to DECOILER   max. diameter of coil: 1800 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm CROP SHEAR   cutting force: 800 kN LEVELLER UNIT   sheet width max.: 800 mm   sheet width (min): 80 mm   sheet thickness max.: 16 mm   sheet thickness min.: 1.5 mm   material cross section max. (450 N/mm2): 3510 mm²   number of leveller rolls: 17 Price of new equipment 1.46 Mio EUR

Inv. Num. : 8399 Type: QRM 300/4 Producer: SMERAL Generated: Parameters: Maximum sheet metal plate width: 300 mm Maximum sheet thickness when cutting: 4 mm Machine weight: 630 kg The straightening apparatus was completely repaired (rollers reground and new electrics).

Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm

CONTROLS   PLC SIEMENS S7 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 260 mm   sheet thickness max.: 6.5 mm   coil weight max.: 3 to   feed velocity max.: 20 m/min   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 3 to DECOILER   design: single reel, traversable   sheet width max.: 260 mm   coil weight max.: 3 to   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet thickness max.: 6.5 mm   material cross section max. (450 N/mm2): 1500 mm²   number of leveller rolls: 21   diameter of leveller rolls: 50 mm   loop controls: yes decoiler KOHLER, type 3000.1 with coil-chair straightening machine KOHLER, type KRM 50.260/2 transfer bridge 6970 mm, hydraulic operated

pressure: 10 t stroke: 200 mm table-size: 450 x 450 mm working speed:: 10 mm/ sec. work height max.: 940 mm toolpiece height max.: 150 mm total power requirement: 1,1 kW : 150 x 6 mm weight: 0,4 t dimensions: 1,15 x 0,5 x 0,9 mm Horizontal bending machine with: - NC control - Dual footswitch - Set of standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand Sahinler Model: PK 35 Year of Make: 2024, Unused Capacity (Kw) 1.5 Voltage 400 Frequency (Hz) 50 Dimensions LxWxH (mm) 1000 x 750 x 1400 Weight (Kg) approx. 400 Quantity in stock 4 Made in Turkey Ø Diameter (mm) 50 Comments Unused machines for competitive prices, multiple units in stock, footpedal included

diameter: 20 - 100 mm workpiece length: 3000 - 12000 mm number of rolls: 2 Control: Siemens SPS/PLC Tensile Strength: 70 kg/mm² feed speeds: 60 m/min Angle: 10 - 22 ° main drive motor: 132 kW roll speed: 180 U/min total power requirement: - kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 7500 x 3000 x 2850 m Machine was retrofitted (Eletric) and not much used 2 roller straightening machine, fully hydraulic and equipped with: - Siemens PLC/SPS control system - Hydraulic roller - Loading table with chain transport - Infeed channel with pressure roller - Pressure rollers - Gearboxes and motors - Siemens Sinamics drives - New electrical system - Hydraulic units - Spare set of rollers - Machine with complete hydraulic adjustment -- Upstroke of upper Roll: 210mm -- Hydraulic cap Stroke: 13mm -- Side Guides and Scrapers set at Exit: 20+35mm 35+65mm  ...

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1600 mmThickness 110 mmWorking height 600 mmPlate thickness 30 mm throughoutWeight approx. 1000 kgGood condition, good surface; used

max. wheel diameter: 620 mm gear width: 90 mm max. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Grad spindle taper: metr. 100 milling head speed: 28 - 56 U/min connected load: 18 kVA Control: total power requirement: 14 kW weight of the machine ca.: 12 t 2020 Retrofit with new control/electrical system) - CNC control NTC (Fanuc) (German/English) - electric handwheel - new motors/ electrics - various change wheels - chip conveyor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength: 1000 mmWidth: 800 mmThickness: 250 mmWorking height: 820 mmPlate thickness: 30 mm throughout- height-adjustable metal substructureWeight: approx. 400 kgSurface rusted; used

Wire diameter range: 2.5 - 7.0 mm Section lengths: max. 4,000 mm Feed speed; 40 - 80 ntr/min complete with non-driven wire reel

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 100 mmWorking height: 745 mmPlate thickness: 40 mm throughout- stable metal substructureWeight: approx. 800 kgGood condition; used