dimeco decoil straight used for sale

Key data: 450 , 1 , 1400

Payload 1200 kg Width 450 mm Coil external diameter - up to 1400 mm Motor 1.5 kW Speed adjustable by frequency conversion Btto 500 kg

Inv. Num. : 5360 Type: MS 48 Sp Producer: HS Created: 2008 Parameters: Maximum sheet plate width: 1000 mm Maximum blade weight: 1300 kg Roll diameter: 148-156 mm Coil: 1020 mm Machine weight: 700 kg Equipment: Electrical control panel with control

Key data: 1000 mm, 1 t

for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg

material width: 0380/460 mm coil weight: 1,00 t coil internal dia.: 340 - 440 mm coil outside dia.: 1100 mm expansion: mechanisch total power requirement: 1,50 kW weight of the machine ca.: 0,500 t dimensions of the machine ca.: 1,40 x 1,10 x 1,40 m with bundle attachment arms at the back, sheet width 380 mm without bundle attachment arms, sheet width 460 mm hand crank 3 bundle attachment arms right-left rotation tape scanning via proximity switch (start-stop) with time delay speed control via handwheel 4-22 rpm mechanical brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0350 mm coil weight: 2,00 t coil internal dia.: 470 - 530 mm coil outside - diam. ca.: 1500 mm total power requirement: 1,0 kW weight of the machine ca.: 1,50 t dimensions of the machine ca.: 1,30 x 1,6 x 1,90 m motor-driven, with manual central spreading The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 350 mm coil weight: 1 t coil internal dia.: 360-475 mm weight of the machine ca.: 500 kg dimensions of the machine ca.: BxTxH 1500x1500x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0360 mm coil weight: 3,00 t coil internal dia.: 380 - 520 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: 1,40 t dimensions of the machine ca.: 1,80 x 1,80 x 1,70 m with infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 1 t coil internal dia.: 350-450 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: BxTxH 1500x1500x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 500 t, 350 mm

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

sheet width - max.: 250 mm coil weight: 250 kg coil internal dia.: Ø 290-550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 150 kg coil internal dia.: 300-500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 2x 500 kg coil internal dia.: Ø 300-540 mm coil outside dia.: Ø 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 1 t coil internal dia.: 375-550 mm coil outside dia.: 1600 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1500x1500x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 150 kg coil internal dia.: 290-550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 300 mm coil weight: 150 kg coil internal dia.: 200-520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 0,5 t coil internal dia.: 480-530 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,3 t dimensions of the machine ca.: BxTxH 1200x1200x1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton

Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton

Max. coil weight: 3t, max. strip width: 500mm, strip thickness: 0.4-5mm, connected load: 0.55kW. With control, straightener and hydraulic unit Rexroth, without documentation. On-site inspection is possible.

band width: 200 mm band speed: 20 m/min : 150 kg - Internal clamping range: 200- 550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1100 mm, 1 t

Paternoster for sheet metal coils 7 gondolas, each with a usable width of 110 cm Load capacity 1300 kg Net weight 800 kg Height 235 cm

Voor een Afrikaanse klant hebben we een afrol- en op maat snijlijn opgeknapt en uitgerust met een eenvoudige, gebruiksvriendelijke Elgo-bediening.

Key data: 350 mm, 2 t, 1500 mm

Double decoiler Load - 2 x 1500 kg Belt width 350 mm Coil outer diameter - up to 1600 mm Coil inner diameter - 360-530 mm Manualle hydraul. Spread Pneumat. Pinch roller mechanical brake Dimensions - approx. 2 x 2 x 2.2 m WxDx H Bto - 1000 kg

sheet width - max.: 0300 mm coil weight: 0,150 t coil internal dia.: 280 - 450 mm coil outside - diam. ca.: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manually adjustable brake Front and rear limiters 4 support arms Sensor-controlled loops The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Met RoboHelix-machines kunnen spiraalvormige schoepen worden gevormd uit standaard ronde of van een patroon voorziene werkstukken. RoboHelix-machines vereisen uiterst nauwkeurige synchrone bewegingsbesturing. Door de gebruiker gegenereerde gegevens worden vanuit cloudgebaseerde software, HelixNinja, naar het apparaat gedownload. Deze informatie wordt vervolgens verder verwerkt om coördinaten in het 3D-vlak te genereren, waarmee het proces van het creëren van een vliegtuig vanuit een blanco basis wordt nagebootst. De motoren volgen synchroon deze coördinaten om het vliegtuig te produceren. Met de elektronische nokkenplaatfunctie in TwinCAT NC Camming (TF5050) is relatieve synchrone beweging overal en altijd mogelijk. Afmetingen en toleranties zijn geen probleem meer zodra de motoren en aandrijvingen zijn gekalibreerd. De tweede generatie RX250 uit de machinelijn van RoboHelix heeft een ...

Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.

Key data: 1000 mm, 400 mm

Compact, used coil rack for efficient processing of small coils on confined space. Thanks to its mobile design, the system is easy to manoeuvre and use them flexibly. The assembly is done from above, while the material is can be quickly brought to the desired working height. Split rollers in the nacelles allow different cuts in one unit and ensure maximum flexibility. The operation is simple, ergonomic and low-maintenance – ideal for daily use. Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Coil width (min.): 1000 mm Coil outer diameter (max.): approx. 400 mm Dimensions: 1400 x 1450 x 1400 mm Colour: red Load capacity: 1000 kg Number of gondolas: 5

used Dräco coil carriage, smooth-running spindle, optimal tension, very easy to drive Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Belt width :1000 mm Coil weight load capacity: 1000 kg Colour: blue Weight: 110 kg Dimensions: 1300 x 750 x 1000 mm Coil inner diameter (min.): 250 mm Coil inner diameter (max.): 515 mm Coil outer diameter (max.): 1100 mm Coil width (min.): 1000 mm Clamping range :280 - 510 mm

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

sheet width - max.: 0280 mm coil weight: 1,00 t coil internal dia.: 290 - 570 mm coil outside - diam. ca.: 1000 mm 0: 42 U/min total power requirement: 1,10 kW weight of the machine ca.: t dimensions of the machine ca.: 1,30 x 1,00 x 1,45 m Control unit missing provisionally connected mechanical brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. coil diameter 840 mm carrying weight 250 kg

horizontal max. coil diameter 1000 mm carrying weight 150 kg

sheet width - max.: 0650 mm coil weight: 2,00 t coil internal dia.: 240-270 mm coil outside - diam. ca.: 1500 mm expansion: mechanisch brake: über Motor speed: 5 m/min total power requirement: 0,55 kW weight of the machine ca.: 0,590 t dimensions of the machine ca.: 1,40 x 0,80 x 1,10 m Max. 650 mm without hoop-feeding arms Control system missing Temporarily connected The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil internal dia.: 360 -440 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4800 € : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 50 mm : 80 mm : 0.55 kW : 1400 mm : 1200 mm : 1550 mm : 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 070007 : prompt, Zwischenverkauf v : Deutschland : 1200 € : 1 : 400 mm : 700 mm : 1500 mm : 2050 mm : 820 mm : 1000 mm with brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070008 : prompt, Zwischenverkauf v : Deutschland : 1200 € : 1 : 400 mm : 700 mm : 1500 mm : 2050 mm : 820 mm : 1000 mm with brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070009 : prompt, Zwischenverkauf v : Deutschland : 1600 € : 1 : 400 mm : 700 mm : 1500 mm : 2050 mm : 820 mm : 1000 mm with brake with 2 spare mandrels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 8200 € : 158.26 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dima rolvormlijn voor de productie van Hibond 55 profielen - voor betonnen vloeren. De Hibond 55 is een 55 mm diep trapeziumvormig vloerprofiel dat wordt gebruikt als lichtgewicht vloeroplossing. Diktebereik: 0,75 gt; 1,5 mm Maximale plaatbreedte: 1200 mm Rolvormlijn: - 13 + 10 stands - asdiameter: 100 mm - center-center afstand tussen rollen: 180 gt; 350 mm

sheet width - max.: 0240 mm coil weight: 0,150 t coil internal dia.: 320 - 520 mm coil outside - diam. ca.: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m • Motor drive • Rear limit disc • Front limit ring • Switch-on delay adjustable via potentiometer • Manually adjustable brake • Loop control via contact switch on the reel base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0150 mm coil weight: 0,150 t coil internal dia.: 230 - 545 mm coil outside - diam. ca.: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m • Motor drive • Rear limit disc • Front limit ring • Left/right rotation selector switch • Manual/automatic mode • Loop control via contact switch on the reel base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 € : 209.28 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ARKU Year: 1993 Decoiler Type: AH 5000/500/MSG-4Q Capacity: 5000kg Working width: 50-500mm Speed: 50 m/min Max coil diameter: 1800mm Auction-ID: A1-40979-30

Technical data Manufacturer: Kemmerich Maschinenbau GmbH Type: V 500 AE Year of Make: 1993 Machine No.: 68597/0 Max. load capacity: 500 kg Connection voltage: 380 V Frequency: 50 Hz Rated current: 1.2 A Configuration Motorized decoiler 4-fold clamping arm system Electrical control Footswitch Emergency stop switch Auction-ID: A1-48536-128

Technical data Manufacturer: OBRU Type: SAW 1M Serial number: 73499 Max. belt width: 200 mm Internal clamping range: 200 - 550 mm Load capacity: 150 kg Configuration Motorized belt reel Adjustable clamping core Vertical design Freestanding frame Auction-ID: A1-48536-119

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 € : 284.16 € : 1 : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 80 mm : 1600 mm : 1550 mm : 2000 mm : 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.