129,676 used machines on RESALE, but how to find them? Machine Search
Outdated MAN E2876LE302 bio gas engine in Exchange.
Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $22,500.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive - 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls - Infinitely Variable Speed Feed Control from 40 - 150 FPM - Newman Six-Row "Quiet Cut" Helical Carbide Cutter heads - Feed Works Consist of Two Pivot Mounted Top Feed Rolls - Top head Chip breaker with 3" - Sections and Independent Yield of 1-1/2" - Air Operated Pressure Bar - Top Head Power Hoist - Automatic C ...
used
description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...
GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...
Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 800 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in delivery are: 02x workbench stand, new Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.
Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in delivery are: 02x workbench stand, new Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.
FOR SALE... STORK WARTSILA 16SW 280 CRANK SHAFT TO WHOM IT MAY CONCERN; WE VE CRANK SHAFT OF STORK WARTSILA 16SW 280 AT OUR STOCK STANDARD MEASUREMENT WITH REPORT. WITH GEAR & COUNTERWEIGHTS. PLS FIND CRANK STAMP DETAILS ON BELOW. 1111SW 131 F013215 LLOYD S STU. 300240 6.93 STU. 9601908 YOB 1993 CRANKSHAFT READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/ aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 280me with up to 280 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...
Band width - 280 mm Thickness 3 mm Setting rollers suit 5-reel 2, all diameter 60 mm Control actuator, band storage adjustable from 0, 5 s â 15 s video available Dimensions 80 x 60 x 140 cm more info on request
used
Ladies and gentlemen, hereby we offer a gas engine, type 2842E312 for sale on! The engine has 29.300 hours and is working properly.
Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 280me with up to 280 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...
FOR SALE... COMPLETE ENGINE STORK WARTSILA DIESEL 6SW 280 TO WHOM IT MAY CONCERN; WE VE COMPLETE ENGINE STORK WARTSILA 6SW 280 AT OUR STOCK PLS FIND ENGINE SPEC AT BELOW MODEL 280 6SW YEAR OF BUILT 1999 NUMBER 13098 POWER 1470kW RPM 750 MADE IN THE NETHERLAND ENGINE READY TO TRANSPORT EX STOCK. BESIDES WE VE ALSO MANY MAJOR PARTS OF THIS ENGINE CYLINDER HEADS / PISTONS / CON RODS ETC .. IF YOU'VE ANY FURTHER QUESTIONS PLS DONT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST OF regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
used
Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min
Technical data for the pallet rack traverse: Shewing system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x pallet rack trusses, new Material colour: RAL 5010 gentian blue Box profile: 140 x 50 mm Truss type: CE140/50/1,5 Agraffe: 5 HK (hook) Weight / pcs.: 17,745 kg 2,800 mm clear width load per pair of trusses 3,900 kg, at the same time. distributed load 02x locking pins, new Execution: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is for pickup only. A further desired Transport or shipment of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery with us.
used
2. Qty. 1 Second-hand process tank Mfc.: Glencore Volume: 280 m³ Built: 2009 Dia.: 6.0 m Height: 10 m Stopped: 2018 Material: AVESTA 2507 (Super Duplex Steel) Code: API - 650 Capacity: 280 m³ Useful Volume: 260 m³ Diameter: 6000 mm Overall Height: 10 000 mm Design: Atmospheric Pressure Service Temperature: xx Stored Product: Process Solution Density: 1.8 kg/dm³ Coating: According to plant Welding: According API 650 Radiography: According to API 650 Asset: Zinc Asturine Application: Leaching process (Acid + spend electrolytic returned – Acid from electrolysis) Construction Structural Element Thickness Material Bottom 10 mm AVESTA SAF-2507 Virolas 6/8 mm AVESTA SAF-2507 Internal 6 mm AVESTA SAF-2507 Ceiling 6 mm AVESTA SAF-2505 External stiffeners AISI-316 6 316Ti Screws A4 - 70
Depth: 800 mm/ Width: 2,870 mm/ Height: 938 mm The scope of delivery includes: 02x Workbench stand, used Material colour: grey Frame profile: 85 mm Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 90 x 50 mm Truss type: SLB Design: Head crossbeam clear width: 2,690 mm 08x locking pins, used Finish: completely galvanized 01x Chipboard of second choice, used Thickness chipboard: 38 mm Chipboard width: 2,870 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly in two parts) 01x Chipboard of second choice, used Thickness chipboard: 38 mm Chipboard width: 2,670 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly in two parts) 16x self-drilling screws, new Version: galvanized Dime ...
Depth: 1,000 mm/ Width: 2,870 mm/ Height: 938 mm The scope of delivery includes: 02x Workbench stand, used Material colour: grey Frame profile: 85 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 90 x 50 mm Truss type: SLB Design: Head crossbeam clear width: 2,690 mm 08x locking pins, used Finish: completely galvanized 01x Chipboard of second choice, used Thickness chipboard: 38 mm Chipboard width: 2,870 mm Depth chipboard: 1,000 mm Surface: coated if necessary (possibly in two parts) 01x Chipboard of second choice, used Thickness chipboard: 38 mm Chipboard width: 2,670 mm Depth chipboard: 1,000 mm Surface: coated if necessary (possibly in two parts) 16x self-drilling screws, new Version: galvaniz ...
Debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 Process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. ball valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.
n1-n2= 40-1400 rpm 220 V 150 W 50 Hz Dimensions LWH: 200 x 100 x 500 mm
Robot DAL MASCHIO DM 3E 2800 for big injection moulding machine 1600 ton // condition - perfect // Price 12.000 Euro
Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr
Alu window profiles Punching tool for end hole ventilation 4 stations
Weibert ASA 2803 Aspirator Rated volume flow: 2800m3/h Filter area 3.84 m2 Chip collection volume 240l Suction socket: 203mm Suction nozzle outlet: 3x 100mm Sound pressure level max. 87.5dB (A) Recording power 2.2kW Engine 400V 50Hz LxWxH 1500 x 500 x2100mm Weight 53kg
Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2800 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 30% ED at 280 amperes 60% ED at 210 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, kpl ...
TECHNICAL DATA: Textile machine Dimensions mm: 3000 x 1800 x 2180 Installed power KW: 3 Weight Kg: 350
M. No.: 111208990B // Age: NEW // Binding speed: 300 bindings/hour Paper format: DIN A4 Cover spine width: 3.5 - 28 mm Binding capacity: max. 280 pages (80 g / m²) Equipment / Additional information: 11 packages of materials
SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE
SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE
Ultra-Turrax Manufacturer: IKA N°: 0185 Power: max. 15 kW 380 volts max. 1476 rpm good condition LWH: 2750 x 500 x 550 mm
Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...
Hydraulic excavator chain excavator crawler excavator Manufacturer: Hyundai Type: ROBEX 280 LC Built ca.1999 6 cylinder four-stroke diesel engine Engine model: Cummins 6BT 5.9 / 128 hp Chassis length approx.: 4900 mm Cab height approx.: 3000 mm Chassis width: 3400 mm extra width quarry bog chain, chain width approx.: 810 mm Weight about 30 tons. Deep Spoon Oscar Meier AG Type ASM 100 Pinion repaired from the rotary gearbox and seals of rotary entry.
Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...
Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...
Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...
Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...
Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change
maximum number of results exceeded
please refine your search
