die spotting press used for sale

Electric motor, three-phase motor -Power: 0.125 kW -Speed: 1100 rpm -Shaft diameter: 14 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 235/190/H160 mm -Weight: 10 kg

Gear motor, electric motor, electric gear motor -Speed: 44/88 rpm -Power: 0.22/0.3 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: -Number: 3x motors available -Price: per piece -Dimensions: 420/210/H220 mm -Weight: 26.3 kg

Gear motor, electric motor, electric gear motor -Speed: 115 rpm -Power: 0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: -Price: per piece -Number: 2x available -Dimensions: 410/210/H195 mm -Weight: 19.5 kg

Gear motor, electric motor, electric gear motor -Speed: 28 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: -Price: per piece -Number: 2x available -Dimensions: 365/180/H175 mm -Weight: 13.3 kg

RMH Chain Mill Capacity container 50 litres Drive: 5.5 KW/400 V For shredding electronics, connectors, monolith Adjustable via hand lever and adjustable in different positions. Tiltable

Diebels Recyclingmaschinen_Kabelgranulieranlage RMH 2 D Granulator: 11 KW Connected load: 19.6 KW Weight: 2,450 kg Capacity: 100-250 kg/with pre-shredder up to approx. 300 kg/h Optionally available with shredder/conveyor system with permanent magnet

Diebels Recyclingmaschinen_Kabelgranulieranlage EUREKA 15 Granulator: 15 KW Connected load: 22 KW Weight: 2,500 kg Capacity: 100-250 kg/with pre-shredder up to approx. 300 kg/h Optionally available with shredder/conveyor system with permanent magnet

Diebels Recycling Machines -Cable pelletizer EUREKA 15 LINE Granulator: 11 KW Pelletizing system connected load: 22 KW -Conveyor system with magnetic head roller Drive: 0.37/400 V -Pre-shredder RMR 170/400 Drive: 12 KW with 0.75 KW Hydraulic Gate Valve Pelletizing system Eureka 15 used system overhauled from year: 2006 Conveyor system with magnetic head roller New machine Pre-shredder RMR 170/400 new machine Electrically configured with power control Capacity with pre-shredder up to approx. 280 kg/h

Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Max. Operating pressure: bar -Temperature range: up to 120 °C -without fan -Dimensions: 420/120/H650 mm -Weight: 32 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 1500 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: - -Dimensions: 380/300/H250 mm -Weight: 38 kg

Electric motor, three-phase motor -Power: 0.125 kW -Speed: 900 rpm -Shaft: Ø 14 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 5x available -Dimensions: 230/190/H160 mm -Weight: 10 kg

Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 2.7/4.0 kW -Speed: 950/1440 rpm -Shaft: Ø 32 mm -Construction: B3 -pole changing -Protection class: -Dimensions: 480/320/H270 mm -Weight: 78 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: -Number: 1x available -Price: per piece -Dimensions: 410/360/H285 mm -Weight: 49 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 1450 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 430/360/H285 mm -Weight: 58 kg

Gear motor, electric motor -Speed: 66 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: -Dimensions: 445/210/H220 mm -Weight: 27 kg

Geared motor, electric motor, three-phase motor -Speed: 12 rpm -Power: 1.1 kW -Design: B3 angle -Hollow shaft diameter: Ø 35 mm (shaft Ø 35 mm) -Dimensions: 510/220/H300 mm -Weight: 33 kg

Electric motor, three-phase motor -Motor is for a Ehemann grinder -Electric motor with 2 shaft outputs -Voltage: 500 volts -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - -Dimensions: 540/340/H270 mm -Weight: 50 kg

Electric motor, three-phase motor -Motor is for a husband grinder -Electric motor: with 2 shaft outputs -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 580/340/H260 mm -Weight: 75 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 1415 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 380/195/H275 mm -Weight: 27 kg

Electric motor, three-phase motor -Transfer in current condition as seen -Power: 0.55 kW -Speed: 620 rpm -Shaft: Ø 22 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 320/230/H200 mm -Weight: 19 kg

Electric motor, three-phase motor -Manufacturer: Dietz, electric motor type GDP 233 pole-changing -Power: 0.8/1.1 kW -Speed: 1410/2820 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Dimensions: 310/270/H210 mm -Weight: 25 kg

Electric motor, three-phase motor -Manufacturer: Dietz, electric motor type FDR 80C/ 2 Q -Power: 1.5kw -Speed: 2850 rpm -Shaft: Ø 19 x 35 mm -Construction: B14 -Protection class: IP 54 -Number: 3x motors available -Price per piece -Dimensions: 275/210/H160 mm -Weight: 13.2 kg/pc.

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Dierking, DC gear motor type SO GP 86-2L -Voltage: 160 V -Power: 300 watts -Speed: 3000/146 rpm / i = 20.5 : 1 -Shaft: Ø 16 x 30 mm -Dimensions: 320/160/H150 mm -Weight: 10.1 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg

electric motor, three-phase motor -Manufacturer:Dietz, electric motor type FDR100LB/ 4 P -Power: 2.5 kW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -Dimensions: 360/300/H250 mm -Weight: 30 kg

Folding carton machine from service with up to 140 cycles and lowerable conveyor for double packaging

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg

for milling chucks, spindle head, tool holder, tool carrier -Manufacturer:Diebold, assembly block for assembling and disassembling tool combinations -Arrangement: vertical and horizontal -Mounting: SK40 -Dimensions: 275/160/H180 mm -Weight: 10.5 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 198 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 5.5 kW -Shaft mount: Ø 32 mm -other sizes also available in stock -Number: 14 engines available -Price per piece -Weight: 87 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 196 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 78 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 194 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 74 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Engine: Hatz diesel -Frequency converter: -Vibration bottles: 2 pieces 1x vibrating bottle Ø 60 x 450 mm 1x vibrating bottle Ø 50 x 450 mm -Cable length: 6 m each -Dimensions: 1550/800/H1150 mm -Weight: 220 kg

We sell this conveyor belt 10 m long. Conveyor width 50 cm, belt width 40 cm.

Die cutter

weight max.: 12 t work piece width: 880 mm total power requirement: 130 kW weight of the machine ca.: 63,3 t incline position of plears upwards 6,5° incline position of plears downwards 12,5° strike-slip fault left 200mm strike-slip fault right 200mm rotary speed of plear 2-30U/min driving speed 2 levels 0-60m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 800 kg workpiece length: . mm work piece width: . mm stroke: 500 mm total power requirement: . kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3x1,6x2 m Electric drive control block is missing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Perkins 1100 Series 1104D-44TA, 83.0 kW / 111.3 hp @ 2200 rpm; Power [PS]: 113; Transport weight [kg]: 567

Perkins 1100 Series 1103A-33TG2 60.5 kW / 85,8 hp @ 1500 rpm; Power [PS]: 82; Transport weight [kg]: 420

Selling Proposal for a Generator Set Product: Container generator set 20 FT Engine: Detroit Diesel type CW800 Power: 800 kVA Year of creation: 1997 Operating hours: 1650 hours Status: Always serviced, currently operating in a data center Contact 0033689741883 Mail: negomat93orange.fr

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-03d53-50348 312-used/300, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 03D53 / 50348312; Transport weight [kg]: 565

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 391 Kw, Rated Speed: 1625 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/used-detroit-diesel-dd13-e ngine/22406, , = More information =, , Type: Engine, Type number: DD13; Transport weight [kg]: 1220

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: No Flywheel , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 320 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/used-detroit-diesel-6067-h vx8/22388, , = More information =, , Type: Engine, Type number: 6067-HVX8; Transport weight [kg]: 1115

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: No Flywheel , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 320 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/used-detroit-diesel-6067-t k62-engine/22414, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 6067-TK62; Transport weight [kg]: 1390

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Working Hours: 1110 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 227 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-6v71t-7064- 7312-used/22432, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 6V71T 7064-7312; Transport weight [kg]: 1250

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 362 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71tti-708 2-7300-used/803, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71TTI 7082-7300; Transport weight [kg]: 1700

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 362 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71tti-708 2-7300-used/801, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71TTI 7082-7300; Transport weight [kg]: 1700

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 260 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8va-7083-73 95-used/25, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8VA 7083-7395; Transport weight [kg]: 1250

Dimensions (L/W/H): ca. 700 x 500 x 1.080 mm current intensivity: 0,73 / 0,42 A weight: ca. 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - / Contact us at -

Description HERSTEL Vertical Lathe VDM 120 Details Year of construction 1998 Control Siemens Sinumerik 840C Flexos Max. turning diameter 1,300 mm max. circulating diameter 1,400 mm (option 1,500 mm) Axis stroke Z/X axis 1,000/1,000 mm (option 1,000/1,500 mm) Dimensions to top edge of spindle 940 mm Main Spindle Bearing Circulation Lubrication 2-speed manual transmission autom. Range switching Main spindle motor 76/115 kW Clamping device diameter 1,600 mm Chuck pick-up centering diameter 790 mm Max. feed force Z-/X-axis 25,000 N Axis speed Z-/X-axis 0.01 - 14,000 mm/min. Disc turret with B-axis Tool holder modular system UTS 50 Main dimensions approx. 6,250 x 3,300 x 4,500 mm incl. documentation