die casting used for sale

Tie bar expansion nut for die casting machine IDRA1800, TR260x9, 446808, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Tie bar expansion nut, Tr260x9, D465x300mm high. Approx. 300kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date ...

Adjusting nut for die-casting machine OL2000, pull out, TR285x10, Oleopress, new -50% Special price As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely new and in its original packaging. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300

Adjusting nut for die-casting machine OL1500, pull out, TR250x12, Oleopress, new -50% Special price As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use and is completely as good as new. Achtung: Wir bieten verschiedene Säulen, Verstellmuttern, Holmdehnmuttern und 2 teilige Muttern von: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300

Adjustment nut for die casting machine IDRA OL1800, pullable, TR260x9, 170359, Idra, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, - is in the original packaging, Adjuster nut, pullable, Tr260x9, D390/338x300mm high. Approx. 115kg for die casting machine IDRA OL1800/1750 The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D370, D330, D300 6 months warranty We give you a 6-month warranty for these goods f ...

Adjusting nut for die casting machine IDRA1800, TR260x9, 141384, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjusting nut, Tr260x9, D430x345mm high. Approx. 255kg for die casting machine IDRA OL1800/1750 With bronze contact rings on both sides, The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for ...

Adjusting nut for die casting machine IDRA1800, TR260x9, 990542, Idra, used Top Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the ...

Adjusting nut for die casting machine IDRA1800, TR260x9, 151913, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In  ...

Die casting machine Frech DAW 80F RC, built in 2003,

Die casting machine Frech DAW 125 S DV, built in 1999,

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Downpour record Grey iron GGG50 1500 x 1500 chamber filter records Downpour records for chamber filter pressing 1500x1500 we can offer to you for almost all arrangements chamber filter records also in PP, filter cloths and spare parts almost all manufacturer.

Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

1 Tilting Casting Furnace Mfc.: Thermcon Built: 2002 Type: 25 T Natural gas 7560 kcal/Nm³ Main burner: 1.9 MW Sec. Burner 0.6 MW

Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.

Manufacturer: Bürkle Lackgiessanlage, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Operating side: links, Working height: 920, Pump system: Rührwerk, FREE TEXT: bald verfügbar,

Manufacturer: Purete, Type: PRT-L2213, Year: 2020 neu, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Operating side: rechts / links, Working height: 880, Feeding speed min/max: 70, Feeding belt mm: 3.000, Outlet conveyor mm: 3.000, FREE TEXT: höhere Geschwindigkeit gegen Aufpreis möglich, Year :2020 neu

Manufacturer: Purete, Type: PRT-L1106, Year: 2020 neu, Control: HMI, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 500, Min.-max. workpiece height in mm: 2 - 100, Working widht max mm: 620, Operating side: rechts / links, Working height: 880, Feeding speed min/max: 2 - 80, Required space L x W x H mm: 2.800 x 2.200 x 1130, FREE TEXT: höherer Vorschub optional, Year :2020 neu

Manufacturer: Giardina, Type: Giessmaschine, Control: no, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 120, Operating side: links, Feeding belt mm: no, Outlet conveyor mm: no, Pump system: ohne, FREE TEXT: auf Rollen,

Qty. 1 Second-hand aluminium foundry – still on foundation Mfc.: Gautschi, ZAM Kęty, Konwent, Remix, Foseco (Poland), Santas Built: 2000 – 2008 Still on foundation Entry material: Aluminium scrap Final product: 9”, 228 mm Billets diameter Scope of supply: Grid-frequency induction furnace PIT1500 manufactured by ZAM Kęty with a capacity of 1.5 tons plus a transformer Medium-frequency induction furnace PIT 2500 manufactured by ZAM Kęty with a capacity of 2.5 tons plus a transformer Kowent MB-M-(5-60) B sweep dust collector Holding furnace manufactured by Remix BSG-10/15 with a capacity of 15 tons Foseco FDU MARK 10 refining unit Horizontal Continuous Casting Machine manufactured by GAUTSCHI, Log length 7.0 m Log Homogenising Furnace manufactured by SANTAS Makina, Model ALLOGENIZER-2500-GS

Auction-ID: A1-50656-12

A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. ...

equipped with a ladle; mold; shovel; including carrying case; Auction-ID: A1-50707-188

Leybold Vacuum Casting Resin System VGH 1000 Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Technical details Type: Electric motor components Frame size: IEC 200 Configuration: - Aluminium motor housings with cooling fins - B5 flanges - End shields / bearing end brackets - Motor mounting feet - Cooling fans - Stator laminations - Miscellaneous cast motor components Visible markings: - Piede per carcassa 200 destro - Piede per carcassa 200 sinistro - Flangia 200 B5 Application: - Assembly of IEC electric motors - Industrial motor manufacturing - Spare parts inventory - Industrial machinery Construction: - Aluminium die-cast components - Steel stator laminations - Precision-machined mounting surfaces Estimated quantity: - Motor housings: Approx. 250–350 pcs - End shields: Approx. 80–150 pcs - Cooling fans: Approx. 20–40 pcs - Stator laminations: Approx. 15–25 pcs - Motor feet and brackets: Approx. 150–300 pcs - Miscellaneous castings: 100+ ...

- Capacity 6t. - A control panel screen is missing. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-4

- This equipment was part of the production line associated with the GOJAIN EQUIPMENT - 2005 foundry sand plant, available separately under batch number A7-50548-1. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-7

Cast iron smelting plant consisting of: A: 2 cold air ovens, capacity: 2-6 t/h and 5/12 t/h with double jacket, water-cooled, extraction rings, sotope filling level indicator, nozzle, smoke hood, drain point for cast iron and slag, B: Spellna fan, type: VRU 28-250-30H3, capacity: 9,000m3/h, C: Wind control with fan and motor 90kW, D: Dust injection with control E: 2 front fireplaces, gas-fired and mobile with weighing device, burner set, day tank, etc. F: Beckmann measures, switches and control panels with recorders and detection lamps G: Concrete spraying compound, mobile, for spraying sand mass including accessories H: Installation for quarrying and furnace repair I: Elevator shafts made of steel with mesh with accessories J: mixer with motor and accessories. Auction-ID: A1-50656-11

Dough divider with long roller and deposition KÖNIG, type: Rex Futura II T4 - 4 or 3 rows can be used - with long scooter - with placement on baking trays - Many parts renewed worth EUR 15,000 - Drum SK 58 for 35 - 85g and SK 70 for 60 - 135g dough weights - Condition: Very good, ready to use

Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 75 mm -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Reversible prism, 1-piece die block for die bending machineBending tool for press brakeReversible prism with 6 different prismsPrism size 30 mm with 3 mm radius for 90, 40 mm with 4.5 mm radius for 90 50 mm with 4 mm radius for 90, 18 mm for 90, 10 mm for 90 12 mm for 45Dimension 90 x 88 mmPrism length 3000 mmWeight 147 kgGood condition; used

Hydr. Press brake, die bending machine HAMBURGER JONESCHEIT type HYPM 70-2600Fabr. No. 4004 Year of construction 1987Printing capacity 70 ton. Working length 2600 mmStand width 2770 mmPlunger stroke 60 mmDistance table - ram max. 390 mmTable size 2750 x 200 mmMotor power 7.5 kWWet connection 380 volts, 50 Hz.- Crimping depth via mechanical fixed stop with electric adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm)- Upper tool,

Air cooler with water circuit of 300 KW emergency diesel Engine cooling with cooling fins, fan and water circuit. Suitable for emergency diesel up to 300 KW engine power. previous use: Henschel Diesel 304 KW Application: Cooling of emergency diesel up to 300 KW Serial Number: – Type: Air Cooling with Water Circuit Year of Make: 1962 Hours: 769 Dimensions [m]: 1.4 x 1.1 x 1.6 Weight: 441 kg

- Unused; - Condition see photos; - 4 cylinder diesel engine; - Viewing recommended; Auction-ID: A1-51200-46

- Unused; - Condition see photos; - 4 cylinder diesel engine; - Viewing recommended; Auction-ID: A1-51200-45

- Unused; - Condition see photos; - 4 cylinder diesel engine; - Viewing recommended; Auction-ID: A1-51200-39

Serial number: KCL5000484 Meter: 2,480.2 hours displayed. Articulated chassis. Telescopic arm with tool apron at the front. Closed and glazed cabin. Work lights and mirrors. Agricultural profile tyres. Auction-ID: A3-46114-35350

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

Storage tank, storage tank, diesel tank, fuel oil tank, steel tank, yard filling station, service filling station - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 3.80 m - D = 1.60 m - weight approx. 1.6 to. - ex works, freely charged - General: You will receive an invoice with VAT shown. The purchas ...

Different MTU - engines 8 V 396, 10 V 396, 12 V 396, 16 V 396 12 V in 2000, 16 V in 2000 12 V 4000, 16 V 4000 many spare parts:Kurbelwellen, cylinder heads, injection pumps, Turbos etc. Anew and used different year of construction different hours generator engine: We also build around to the ship engine! Inquiries please with full information of the type them need. Please, also engine. No. give.

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

AT-Motoren alle sofort ab Lager lieferbar mit Garantie info@miw-zeven.de

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

BHKW in container with Cummins diesel engine Lorey Somer generator 250KVA 1500U / min 50 hertz Storm Steuerung, arrangement is equipped with emergency cooler zusaetzl. regularly waited to zeit 21000 company hours. arrangement is operational and available immediately. for other questions I stand to them to verfuegung under 01727265324

Power: 150 kVA / kW 120 Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-282 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: approx. 450 litres Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24 V / 2 x 143 Ah Generator switch: Yes Accessories: Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm Weight: approx. 8000kg

Tanking system Heating oil tank Diesel tank storage tank Hazardous fuel tank Safety tank Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 50,000 liter double-walled storage tank for the storage of diesel. fuel oil or other hazardous substances as follows. Rated capacity 50 cbm Piece 1 used but overhauled, i.e. the container is cleaned, new reworked, primed and painted Colour equipment lacquer RAL. However, you can also make your own colour wishes at any time Bring. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate in accordance with DIN 6616 D/2 and type plate Piece.  ...

2 piece "Backlog from series production" Capacity: 330 kVA / 264 kW plus 10% overload Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-353 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: 550 l Switchgear / Starter: automatic switchgear for parallel operation Battery voltage / capacity: 24 V / 2 x 143 Ah Ggenerator switch: Yes Power switch: No Automatic: Yes - Kuhse Accessories: weather protection cover, Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 16,000 liters double-walled used, with a used diesel pump DK 70 EZ: The pump is 1 year young and was overhauled by the manufacturer general. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 diesel pump DK 70 EZ Container dimensions Length 8,290 mm Diameter 1,600 mm Weight approx. 3,000 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...