dgs system gmbh used for sale

Guntner condensator 150kW GVHX080,1B/2x1-MD.E 1200Eur Guntner condensator 32kW GVHX 050.1A/1-ND.E - 400Eur Guntner condensator 17kW GVHX 045.1A/1-LW.E - 200Eur DT15K VERY GOOD CONDITION!

Water system, ultrapure, Millipore Direct-Q 3 Year of construction 2018

System for the extraction of exhaust air from electroplating tanks and purification of the exhaust air by means of a washing process; Centrifugal fan, motor 15 kW, 1452 RPM

Thermal CTP Agfa Xcalibur E Year: 2004 in production with Transporttable Transfer table Processor Agfa Elantrix Workflow Apogee V.7.1 Price: on request

QuantStudio™ 5 384 QPCR SYSTEM, LPTP (non IVD) - A28570GTS used 2 months. Price negotiable.

Sprematec baking system BASE CONE 212 / 69 / 16 for roll production - Condition: Demonstration system - Number of baking plates: 69 pieces - Baking plate size: 212 mm - Product size: D= 20 x 48 mm - incl. succession line

8-up Thermal CTP Heidelberg Topsetter 102 Year: 2000 Exposure time: 22097h Plate winding cycles: 46324 Diodes in very good condition Plate size max: 940x1160 mm Plate size min: 650 x 550 mm Exposure resolution: Full HD 4k Speed: 50 plates/h Power consumption: 200/230V 7.5A 50/60Hz Price: on request

: DEMAG : . : 20 Euro . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fortuna Head Machine Type: KM5 5 rows Weight range: 35-80 grams Hourly output: max. 5500 pieces With flour spreader cut + round off analog control can also be synchronized with a proofing cabinet 400V 50Hz Height: 170cm Width: 200cm Depth: 100cm

Fritsch Filler for pastry lines (Euroline) Stainless steel 6 rows with air compressor connection

CIP SYSTEM 3 X 300 L Tanks HEAT EXCHANGER STEAM VALVES CONTROL PANEL CONDITION : NEVER USED SKID MOUNTED AVAILABLE IMMEDIATELY

with 12,000 m³/h air volume. Standard emptying in 3 containers of 200 litres each Reliable, quiet and easy to use. The FI series is suitable for the extraction of different staeube and spaene. Due to its efficient compact design, it is designed for use indoors and outdoors of workshops with minimal space requirements. The housing made of painted sheet steel, FILTER D 145 X H 1200 and the programmable, automatic compressed air cleaning system ensure an equal handling of the spades and bars. These are fed into handy, mobile metal housings with a viewing window for the fuel level indicator. Equipped with calming chamber for coarse particle separation at the entrance into the filter unit. The deduster is designed as a vacuum system for high suction performance and maximum fire and explosion protection with integrated Loesch water ring. The highly efficient, clean air-installed, sound-c ...

4 up Violet CTP CTP FUJI V6 Full automatic with feeder for 3 formats plates, in-line die-cutting, Glunz&Jensenn imager and stacker B2 format in perfect technical and visual condition Price: on request

BWM COMPACTA 4010- L SEALER PACKING SYSTEM FULLY AUTOMATIC

3-tier Preparation Conveyor Suitable for a variety of applications: vegetables, poultry or meat. 3-tier system

Packaging line consisting of: 1 4-chamber VA silo with bucket elevator, 1 multi-head scale MESOMA combinat 14S, type MD300/ME400, No. 11.02.-069, year of construction 1996, 1 flow wrapping machine MESOMA MD300, , 1 metal detector CINTEX,1 checkweigher OCS Ec, No. 1002883, year of construction 2005, with conveyor belt and dispenser, No. 11825/11208804, year of construction 2011, 1 packaging machine JP KV400, No. 362/2005, with control panel SIEMENS Simatic panel, 1 labelling and carton closure system COMARME gema 470, No. AZ026245, year of construction 2005 with labeller BLOHME Advanced.01, No. 10388, 1 carton folding machine BEDO VA 985, No. 985.1.52496, year of construction 1997

4 up Thermal Agfa Acento E Year 2005 With Harlequin Rip Price: on request

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.

4 up thermal CTP AGFA Avalon N4 year 2014 32 diodes with AGFA Apogee RIP Price on request

8 up Thermal CTP Avalon N16–50 XT Punch system Bacher 780 Avalon N16 May 2012 Life time plates 343123 p Lifetime running 24921 h Actual running time 13276 h Exposure time 5885 h LD Status Reserve (U) 77 Current (U) 25 Reserve (L) 67 Current (L) 25 GLV replaced in may 2022 Price: on request

8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request

Manufacturer: Heidelberg Model: Topsetter 102 Modules: -Topsetter P/PF 102 MCL -Multi Cassette Loader P/PF 102 -Topsetter P/PF 102 Recorder -Transporttable advand MDT 48C -InterPlater 135 HD/HDN/Thermal Exposure time/ runnung time: 34936 hours Plate winding cycles: 76313 Price: on request

Used bread roll system KÖNIG, Type: Laurin 1000 / Futura -In bakery condition- Versatile for round rolls or Berliners, shaped pastries, such as Kaiser and long rolled products. Wound products, such as salt sticks, croissants or Kornspitz with additional winding unit possible. - 2-row head machine Futura with active drum SKG51 and AKG70 - Cross input tape - Fermentation chamber and forming station Laurin 1000 - Mehler - Punching - Tool unit - Punch flourer - Settling device for automatic settling on sheet metal - Sheet metal input for 2 sheets - Sheet metal output for 2 sheets - Control switch - Display Universal, versatile small pastry system for round, spotted, long-rolled and sliced (pressed) dough pieces. Can also be combined with a winder via the side discharge. The facility is in good condition. Viewing and test run are possible by arrangement. Overhaul poss ...

Industrial cooler , Operating overpressure 18 bar , Filling weight 2 kg , 230 V , 8.62 A , 1.65 kW , 50 Hz , Refrigerant R 134 a

Pick by Voice System, Honeywell, A500 and A720 - used - : Prices per piece ex location: A500: 1.250.-€ (net) A720: 1.450.-€ (net) Price for complete acceptance: 15.000.-€ (net) then incl. all spare parts such as batteries, carrying straps, spare attachments for the ear cups and microphones etc. Manufacturer: Honeywell Type: A500 – 13 pieces Type: A720 (newer model) – 5 pieces Original price per system approx. 3.600.-€ (net) Each set includes one device with 1 pair of headphones Condition: very good Available: from now on D-64859 Eppertshausen

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Industrial cooling system , Cooling capacity 3000 kcal/h , 24 bar ,380 V , 50 Hz , 4,9 A , 2,5 kW

Execution: Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine type: F 4 M 2011 Motor power: 27 KW Cooling: Oil-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator Type: Synchronous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 pole Delivery: Assembled Tank: Version: Base frame tank with drip tray Content / Litre: 50 Dimensions of the unit: Width approx. mm: 960 Height approx. mm: 1,236 Length approx. mm: 2,000 Weight approx. KG: 1.075 Use: Bearing number: 1229 Condition: Demonstrati ...

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

750-841,750-474,750-430 (5x),750-461,750-602,750-530(3x),750-600(2x),750-614 ,/50-404 1000 003(2x),750-404 1000 004(2x),750-602

Floating sink system for separation-washing and drying of contaminated films etc. Floating sink container with cyclone for feeding and paddling. 2-2.5 cbm water volume Bucket elevator to dryer mechanical dryer MTM with 15.kw. B8dkee0iwp Material discharge with pressure blower 7.5kw. Heating 20 kw. Complete with control cabinet. Everything is checked and maintained before handover Inspection by arrangement.

Available EMCII to SD machines - P76 - -> sold - P92 - P115 --> sold

I am selling the Colombo Angelo Figli AM33/AF window angle system. Year of construction 2005. Pin side saw + 620mm spindle fully servomotor. Roll forming side 3 spindle + strip cutting unit fully servomotor. Milling heads VYDONA WOOD EU78-92, wood-aluminum 92 everything programmed into the machine and included / possible to bill if not accepted. Combined power 50KW Weight 6000kg. Compact size, cheap also for small workshops. Available right in stock. Condition very good. Complete system with tools / possible to bill if not accepted. Please contact us for more photos and info.

Manufacturer: Gietart Type: GW 1530-425 Year of construction: 1979 Location: Papenburg Operating hours: approx. 7,150 blasting hours (from 2001 onwards) Components: 1. Support crane 2x3,2 to. with Truninger profile magnet system (optional) 2. 5 transverse transports approx. 10.50 m 3. 13 m inlet roller table 4. Preheating furnace with 4x80 kW thermal power Bottom/Top 5. Gietart blasting system GW 1530-425, YOC 1979, (W:1,5mxH0,4m), 4 x 18,5kW centrifugal units 6. Gietart Lackiercenter BJ 2000 7. Drying tunnel approx. 10 m 8. Chain conveyor approx. 13 m 9. Color filter Donaldson Torit DFT 3-12 BJ 2000 incl. Precoater 10. Jet filter Donaldson Torit TD 6120 - 0 incl. afterfilter (police filter) for indoor installation 11. 13 m roller conveyor 12. 5 transverse transports approx. 6 m 13. Crane system 2x3,2 to. with Demag magnet system (optional) The complete plant was ...

Cartridge filters, among other things, for the filtering of paint dusts Manufacturer: Donaldson Torrit Type: DFT-18 Year of construction: 2004 Volume flow: 3.33 m³/s; 12,000 m³/h Power consumption: 11 kW Weight: 1.175 kg Fan: from 1980 (see nameplate)

Cartridge filters, among other things, for the filtering of steel dusts Manufacturer: Donaldson Torit Type: TDS 20 Year of construction: 2005 Power consumption fan: 22 kW Volume flow: 18,000 m³/h Pressing: 2,550 Pa Weight: 1,800 kg Construction: Robust filter housing made of 3 and 4 mm sheet steel Special features: Upstream cyclone made of Hardox sheet metal, downstream police filter system, various pipes and screws

Bitzer compressor unit Type: 3 x HSK 8571-140-40P Volume: 3 x 410 m3 Cooling capacity for R404A: 860 kW at -5°C/40°C, 705 kW at -10°C/40°C Cooling capacity for R134A: 540 kW at -5°C/40°C, 440 kW at -10°C/40°C Dimensions: 4100 x 1400 x 2500 mm Reference number: Z25 Pieces in stock: 1 Condition: Used

Bitzer compressor unit Type: 3 x HSN 7471-75-40P, 1 x HSK 7471-90-40P Volume: 4 x 250m Cooling capacity for compressor unit HSN (X3) R404A: 480 kW at -10°C/40°C, 360 kW at -20°C/40°C Cooling capacity for HSK7471(R404A): 145 kW at -10°C/40°C, 93 kW at -20°C/40°C Cooling capacity for HSN7471(R404A): 160 kW at -10°C/40°C, 120 kW at -20°C/40°C Dimensions: 5000 x 1500 x 2100 mm Reference number: Z26 Pieces in stock: 1 Condition: Used

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Year of constru ...

BAQUETTE MACHINE

free-standing crane system Dimensions: width x height x length, approx. 4 x 9 x 21m Two trolleys, 1000kg each In the build-up state

KG dosing unit, Fabr. Schenk, Type: DA100, in stainless steel, with agitator with engine Bauer on top, standing on mobile feet

Keyence XG-7501P Multicamera Image Processing System Control Control Unit XG7501P Manufacturer: Keyence Manufacturer Part Number: XG-7501P Type: Multi-camera image processing system, control unit side cover included Country of manufacture: Japan Item condition: This article comes from a company dissolution of one of the largest automotive parts suppliers in Germany and was stored there in paternosters, so some original packaging is missing and some articles have traces of stock

Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...

Machine Type: TIG Inverter Welding Machine gas-cooled DC and AC system Brand: Merkle Type LogiTIG 240 AC/DC Connection voltage 1 x 230 Volt Setting range 3 – 240 amps Duty cycle 35% ED at 240 amps 60% ED at 160 amps 100% ED at 130 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Aluminium = 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 32 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 25 kg Age 36 months Condition workshop-tested like new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 24 Months ...

Complete AKE band sawmill consisting of: Main machine list Log manipulation RR 700 Feeding for debarking Debarking - Cambio (sold) Reducers Feeding saw line First band saw - make: AKE (vertical) Second band saw - make: AKE (horizontal) Hacker Cross-cut saw Two cutting saws - make: JONSERED Lamellar saw make: WACO Model 130 Special Hydraulic equipment Pneumatic equipment Suction Control system Spare parts inventory Round wood L = 1800 - 4500 Diameter = 100 - 1000mm Board thickness = 16 - 100mm Capacity approx. 40,000 m3 of round timber / year in 2-shift operation with an average round timber diameter of 30 cm The system was installed after a fire damage in 1998 and produced until 2004/2005. Until 2008 only limited use. In 2013, the system was professionally dismantled with extensive documentation to ensure easy installation at the new location. Technicians f ...

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

Holtrop Jansma clean air extraction with rotary lock, fire protection device, autom. Fire extinguisher & fire damper Brand: Holtrop Jansma Type: MSO400 ZRSL Year of construction: 2022 M-No.: W0061083B, Clean air extraction: MSO 400ZRSL Intake manifolds: ø400 mm Length: 3,650 mm Width: 1,230 mm Height: 3,270 mm + 1,500 mm Weight: 1,000 kg Capacity: 11,000 m³/uur Pressure: 1,965 Pa Power supply: 11 kW, 380V, 3Ph, 50 Hz Filter surface: 69 m2 Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Return air duct: 500500 mm Noise: 80 dB(A) Flame Protection Fire Extinguishing Device:: Includes: automatic powder fire extinguisher Automatic flame protection flap in the return air duct automatic shutdown of the fans Check valve in the intake line Vibrating device: Incl. programmed Switchboard Turnstile: DRSL-3000 Dimensions of di ...