We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,284 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
measuring length: bis 3000 mm Tube length: 3280 mm numbers of toolholders: 4 : Rohr galvanisch Verzinkt dimensions: 3,3 x 0,3 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
measuring length: bis 5000 mm Tube length: 5280 mm numbers of toolholders: 6 : Rohr Edelstahl dimensions: 5,3 x 0,3 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
impact length: 5000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 172 kg length in width: 620 mm length in total: 5400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
measuring length: bis 4000 mm Tube length: 4280 mm numbers of toolholders: 5 : Rohr Edelstahl dimensions: 4,3 x 0,3 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Merkle Insquare 300 AC/DC welding system Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A TIG AC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A Electrode welding operation: Rod electrodes: 1.5-6 mm Open circuit voltage: 80 V Working voltage: 20-32.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A ...
used
length: 0 mm height: 0 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Ultrasonic Welding Machine for Plastic Articles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Oil cooler from KraussMaffei, model UKTM. In good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).
used
x-travel: 4000 mm y-travel: 2200 mm z-travel: 250 mm Capacity: 3400 bar Number of working hours: 22000 h workpiece width - max.: 200 mm table load: 4 t/m² feed: 84 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 heads NR: W 136 scraper conveyor processing plant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 4000 mm y-travel: 3000 mm z-travel: 230 mm Capacity: 3600 bar workpiece width - max.: 200 mm table load: 14 t feed: 84 m/min Table: 4000x300 mm control: By Vision total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 heads NO: 267 W controlled treatment plant Z axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: HEIDELBERG Model: SUPRASETTER 105 Year: 2008 plates: 280382 Location: Austria Price: on request
used
Extraction year of construction 2019 - used, only 36 operating hours incl. 2 pre-filters and 2 new combination filters The compact device offers a wide range of applications and very high performance. Easy filter change and easy-to-read and easy-to-access control panel. powder-coated anthracite - The filters used are characterized by a long service life - The filter cassettes separate dust, fine dust and gases - Dimensions: 1280 x 1360 x 1005mm - Suction capacity 2500m³ / h -415v ph 3 phases 50Hz with red 32A CEE plug - Hose connection 125mm Ø - Incl. option external start / stop, filter change signal plus 75% - Warranty 6 months (filter excluded)
used
Number of working units: 0 Total power: 0 kW Type: 0 CNC Brand: 0 CNC Model: 0 Technical data Units: vertical: 14 Rotary table:diameter: 400 mm Number of work stations max.: 15 Work-piece clamping: with device diameter: 50 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.10 kW Weight of the control about: 300 kg Overall dimensions machine: Length: 800 mm Width: 700 mm Height: 2000 mm
used
Electrical connected load: 16.5 kW / 400 V / 50 Hz / 3 Ph Condition: well-kept, in working order Availability: as of now fully automatic loading trolley washing system Steam heated - 70 kg/h at 4 bar steam pressure Pump: HP centrifugal pump stainless steel - 17 bar Items to be cleaned: - Bigboxes 1000 x 700 x 700 - Bigboxes 1200 x 1000 x 800 mm Lid for small boxes Loading trolley 200 l Pump stainless steel pressure 17 bar incl. washing rack for lids of the paloxes 1000 x 700 x 700 mm incl. chemical dosing pump incl. extractor extraction length 8 m incl. steam mixing valve incl. additional nozzles for floor cleaning of the big boxes Sick sensors and Festo are used for the printing technology Motors over 0.75 kW IE3 standard
used
sheet width: 100 mm coil outside dia.: 800 mm weight max. in kg: 150 kg speed: 0 - 60 m/min total power requirement: 2 kW weight of the machine ca.: t dimensions of the machine ca.: 2,89 x 1,38 x 1,4 m : 2 x 150 kg band width: 100 mm diameter of the mandrel: min. 170 max. 540 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 250 mm coil outside dia.: 1400 mm weight max. in kg: 2500 kg plate thickness: 2 ... 4 mm straightening feed: 2,5 ... 15 m/min coiler: expanding range: mm total power requirement: 1 + 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer HSK 7471-90 -KaeltePower: 435 kW at -10ºC/40ºC R404A 280 kW at -20ºC/40ºC R404A -Volume: 3 x 250 m3/h -Quantity in stock: 1 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
used
Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...
used
used
The machine was overhauled in 2015 and then used three times for test purposes Item Condition trim Availability Right away Location Saxony Machine No.: 990801 Volt 3 x 400 + PE Kw 5 Ampere 25 Heart 50
used
Cell with welding laser E-TECH TRUMPF TLF4000 Year of construction: 2005 Laser: TLF 4000 Rok produkcji: 2005 Laser: TLF 4000 Receiving robot : Yaskawa Motoman NX100
used
Cell Berger with grinding robot Kuka KR 180 (external grinding A1) Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 belt dimensions 3500 x 30 mm - contact disc diameter 200 mm - Motor power 4 kW 2 x polishing stations, - Polishing disc diameter 350 - 600 mm - Power 5.5 kW Gripper change cabinet Belt conveyorsInteroll Automation GmbH - Total length approx. 2000 mm - Bandwidth approx. 440 mm
used
Cell Berger with SChleif robot Kuka KR 180 (internal grinding I1) Grinding cell Berger 2012 (internal grinding I1) - Total weight approx. 6200 kg - Dimensions of the cell: approx. 4650 x 2400 x 2900 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) 2 x Polishing stations, Polishing disc diameter 350 - 600 mm Polishing disc width 100 mm - Power 5.5 kW
used
Machine type: TIG inverter welding system gas-cooled direct current system Make: Merkle Type TIG 300 DC Serial No. 70.381 Connection voltage 3 x 400 volts Setting range 5 – 300 amps Duty cycle 50 % d.c. at 300 amps 60% d.c. at 280 amps 100% d.c. at 220 amps Current adjustment infinitely variable max. weldable material thickness steel / VA = 8 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse 16 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 26 kg Age approx. 13 years Optional accessories Connection for water cooling Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piec ...
used
Machine type: TIG inverter welding system gas-cooled direct current system Make Eurotronic Type TIG 1501 - DCi Connection voltage 1 x 230 volts Setting range 5 – 150 amps Duty cycle 35 % d.c. at 150 amps 60% d.c. at 120 amps 100% d.c. at 100 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly line design Fuse 16 amps Dimensions L x W x H 400 x 170 x 250 mm Weight 9 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece ME-TIG burner TH 161 G, 4 m 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 12 Months Warranty 1 Piece Instruction Manu ...
used
TECHNICAL SPECIFICATIONS Manafacture: COMAC Designation: Dust control system / nebulizer Type: Akkua Jet 65S Version: with 5 m articulated arm, on trailer Year of construction: 2012 Range: approx. 65 m (significantly more in the wind direction) Rotation: 0-360º (hydraulic) Vertical adjustment: -15°/+50° (hydraulic) Area coverage (theoretical): approx. 13,300 sqm Water consumption: from 1,500 to approx. 8,000 L/h Number of nozzle rings: 3 pcs. (separately switchable) Number of nozzles per wreath: 52 pcs. Total number of nozzles: 156 pcs. Fan power: 11.5 kW Water pump power: 4 kW Water filter: at 100 μm (stainless steel filter) Operating water pressure: approx. 15 - 22 bar Connection electrical: 400V/32A CEE Control voltage: 24 V Connection water: 1" F Average air velocity: approx. 38 m/s Air flow rate: approx. 30,000 cbm/h Degree of protection of the machine: IP ...
used
A screw compressor system Atlas Copco is offered, Used Ready for immediate deployment! 100% oil-free compressed air; Reduced energy costs; Applicable in: Pharmaceutical industry food and beverage industry; electronics industry; Medical and Healthcare If you have any further questions, please do not hesitate to contact us.
used
Extraction system for wall mounting Manufacturer Plymoth Special electrostatic precipitator system without paper filter! Type EFO5000 Electrostatic precipitator, function via electrical charging of dust particles. Used to extract oil mist. Details according to photos. Special price
used
used
used
Thumm SU100 P Current UV Immersion Impregnation System with Exhaust Air Purification System Current UV impregnation is an innovative immersion process for low-voltage round wire windings. In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow. When dipping the heated winding, the impregnating agent becomes thin and can thus penetrate into the smallest cavities. With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can drain off again after immersing on the cooler sheet metal package. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the sheet metal package. By eliminating conventional furnace drying, energy and time are saved. Together with the use of a low-emission impregnating agent, the en ...
new
: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 174900 € : 4000x2000 mm : 37 kW : Max. Materialstärken : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4.100 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT o ...
new
: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 217800 € : 4000x2000 mm : 37 kW : bei Wasserstrahl : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4136 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT oem50 H ...
used
Complete industrial bread roll line W&P KEMPER, type: SoftStar -In bakery condition- The line consists of: Head machine W&P Softstar - 6 rows - SIEMENS Simatic Multipanel Touch - Weight range: 35 - 85 g - Capacity: max 7,500 pcs./h Pre-fermentation cabinet W&P Kemper Evolution - Fermentation time approx. 12 minutes - By-pass conveyor - Flour spreader - Spot unit - Contact rollers - Long-knitter - Pull-off tape - SIEMENS Simatic Panel
used
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Lauenstein Wernigerode Type: T3 antique screw tempering machine YOM 1935 Output: bis zu 400 Kg/h / approx. 400 kg/hr different: Untampered original condition flat Belt drive Tempering unit complete with water jaketed and agitaded chocolate hopper Electrical cabinet is Original At the moment we rebuild this machine in original condition We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked
used
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober with Original wooden cooling tunnel manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 305 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1930 work width: 305 mm different: With origin wooden cooling tunnel, approx. 8m extendable mass container absolutely in original condition ! We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, (EXW)unpacked
used
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober antique manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 620 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: maybe between 1930 - 1940 work width: 620 mm different: with wooden cooling tunnel, approx. 8m fixed mass container We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, unpacked
used
used
Vibronics Ultrasonic Bath Brand: Vibronics Power 1.8 kw; Serial number: 6092 Total dimensions L: 2800 mm; W: 1700 mm; H: 930 mm; Tank size: WxHxD= 1350x720x990 mm Frequency 25 kHz equipped with 4x generators
used
4 up thermal CTP Mnaufacturer: Screen Model: 4300 E Year: 2006 9900 plates produced With Single Autoloader With Rip With Stacker Location: Switzerland Price: on request
used
Parts Cleaning System Baskets basket weight 10 kg Power consumption 63.5 kw Weight of the system 2800 kg Dimensions 1700 x 6010 x 2700 mm
used
FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration
used
8 up Themal CTP Screen 8300 (FUJI Luxel T9300) year: 2007 97,000 plates produced Located Germany
used
LIQUIDATION of special vacuum system for piston stuffers that lack vacuum. Manufactured by ANDHER model VAE-10. Its status is of re-release (occasion). Patented system for vacuum stuffing, using concentric funnels attached to any type of stuffer. Improve finish and quality naturally, save gut! The machine is ready to plug in and work with. Thanks to manufacturing based on design and high technology, ANDHER VAE-10 is a Patented System that achieves: - More quality in the product, by eliminating the air inside the casing without added chemistry. - Savings in process time, by not having to puncture the gut to extract the air. - Significant savings in casing, by compacting and completely filling the interior with meat, getting more kilos with less gut. - Improve the presentation, as there are no air spaces. - Reduce the loss and the time of curing or oreo of the sausage. - Eliminate ...
used
Winkelanlage Weinig including tools Type: UC 10/6 Year of construction: 1994 Cross wood processing 7 x stroke (7 tools on top of each other at IV 68) Longitudinal machining 3 shafts: 2 pieces with 3 x stroke and 1 piece with 2 x stroke Screen control for individual programs such as individual and series production Swivel stop arm for inclined window processing Tool: IV 68 Leitz (Dufix) with extension kit for sash 78 mm / frame IV 68# IV 68 with rung profile (carnish arch on the glass fold) IV 78 Zuani (for weather legs and rain rail) with extension kit for IV 90 (Zuani) with extension set for wood-aluminium windows (Aluminum shell as glass holder outside of Zuani) Weight 4700 kg
used
mobile heating system, central heating system, steam heating, land steam boiler system used STEAG / GVT Saarbrücken Boiler capacity: Steam 5 t/h Boiler manufacturer: BABCOCK / OMNICAL Boiler type: OMNIMAT Temp. max 190°C Pressure max 13 bar Boiler capacity 6080 l OIL / Gas Burner WALKER RGL50/2-A YOC:2004 5400 kW Gas type N Heat and soundproofed container 11 x 3.6 x 3.9 m Transport weight: approx. 30 t Operating weight approx. 44 t Electrical power requirement 25 kW The plant has not been in operation since 04.2020 and has been preserved dry.
used
mobile heating system, central heating system, steam heating used STEAG / LOOS Boiler capacity: steam 3.2 t/h Boiler manufacturer: LOOS Boiler type: UHD 3200 Temp. max 190°C Pressure max 13 bar Boiler capacity 2650 l Burner WALKER D112/140-2 7.0 kW Heat and soundproofed container 9.2 x 3.6 x 3.6 m Transport weight: approx. 25t Operating weight approx. 30 t Electrical power requirement 25 kW Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Stick Bread Box Bread Filling Machine Box Filling System -automatic stick bread box bread filling system
used
Automatic internal coating system for thin tubes from 2mm diameter For up to 6 tubes at the same time – up to approx. 120cm in length
used
Automatic seal-cut system for closing (merging) and trimming coated tubes with 2-stage OMRON Vision Control (AI)
used
Semi-automatic ink-jet marking system for thin profiles, rods and tubes With Domino inkjet printer