desti used for sale

Tank internal dimensions (lxwxh) 700x550x500mm Exterior dimensions (lxwxh) 880x730x750mm Basket dimensions (lxwxh) 640x490x80mm Ultrasound peak power 8000W 40 kHz operating frequency (others available) max. capacity 175Liter Heater 6KW 400V/50 Hz Clip on lid or hinged cover possible also available rinsing baths or dripping plates.

The basic design of the splitter package was completed in 2011 by Linde Engineering, with equipment procurement occurring between 2012 and 2013, based on the detail design by BARAN Engineering The splitter package's function is to process raw propylene feed into purified propylene, with a concentration of 98.25%vol, suitable for use as a feed in polypropylene plants. The process package includes both pretreatment and posttreatment purification stages. Designed to handle two grades of raw propylene simultaneously, namely refinery grade (75-77%) and chemical grade (90-92%), the process flow involves predrying the refinery grade propylene in molsieve (3A) dryers, followed by stripping in a column to remove light ends. The chemical grade propylene is fed directly into the splitter column due to its higher quality. The splitter column has two different feed trays to accommodate bo ...

The Diper Design DEVANADORA D5-EH-V35 sheet profiling machine was built in 2004 by the Spanish company Diper Design. The machine is designed for profiling metal sheets with a maximum width of 1250 mm. The mandrel diameters (closed / open) are 450 and 550 mm, respectively, and the roller diameter is 1500 mm. The profiling machine works with a bending speed of 35 m / min. Roof flashings were produced on the machine. By using an appropriate matrix on the machine, it is possible to produce e.g. gutters, metal shelves, window sills, profiles, etc. The total weight of the machine is 5 tons. The machine is fully operational and ready for further work. Technical data of the Diper Design DEVANADORA D5-EH-V35 profiling machine - bending speed: 35 m / min - maximum sheet width: 1250 mm - roll diameter: 1500 mm - spindle diameter (closed): 450 mm - spindle diameter (open): 550 mm – maximu ...

Displacement: 1500 cm³ Clamping force: 2500 kN Injection pressure: 2000 bar Table height: 1,000 mm Locking system: fully hydraulic Voltage: 380 V Motor power: 26 kW Cooling water: 1 m³/h Weight: 5.5 t - Injects from above (type ZO) - Ergonomic overall design of the vertical machine - Generously dimensioned clamping unit - Extensive automation options for vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

Table height: 1000 mm Locking system: fully hydraulic Clamping force: 2500 kN Spray volume: 1500 cm³ Hydraulic oil: 40/46 cPcs. Compressed air: 6 bar Voltage: 400 V Weight: 6.35 t - Injects from below (type VU) - Ergonomic overall design - Generously dimensioned clamping unit - Fully hydraulic extensive automation possibilities of vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

This Klockner DESMA 968.250 ZO Injection moulding machine was manufactured in the year 2010 in Germany and has 27676 production hours. It is equipped with a DESMA DRC 2010 control unit. The machine has a clamping force of 2700 kN.

Flat pulley, toothed pulley, multi-belt pulley, pulley, timing belt pulley -Manufacturer: Desch, timing belt pulley Ø 255 mm -Pitch: 14 mm / strap width 55 mm -Receptacle: Ø 40 x 50 mm taper bushing Desch 3020-40 -Dimensions: Ø 255 x 70 mm -Weight: 16.3 kg

The bread slicer is a special design for continuous feeding with baguettes with a stepless drive for high throughput with constant product thicknesses. This was used to produce bread chips. But it is also great for dumpling bread. Different thicknesses can be adjusted. All parts that come into contact with food are made of PE or stainless steel. Open design, therefore easy to clean. Test run with your product possible at any time.

Description: Lot of industrial heaters 4 units: - 3 units DESA MASTER B 150 CED and BM 150 CED of 44 kW heating capacity - 1 DESA BSA70EDI unit of 20.5 kW heating capacity With wheels for easy transport Approx. Onsite Dimension. (l x w x h): 1,900 x 1,100 x 800 mm, weight approx.: 80 kg

Destoner T.6 a hour

stamp capacity: 2 - 63 mm throat: 110 / 200 mm Various Destaco punching iron, some with accessories: No. 1 & 2: Type 101-200, accessories: one punch + one die, technical data: see picture, price per piece: 150,- No. 3 & 4: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 5: Type 104-200, accessories: 2 punches and 3 dies, technical data: see Picture, price: 350, - No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We  ...

DESKTOP METAL STUDIO SYSTEM 2 3D printer (year 2018) Ideal printer for printing high-performance metal parts in the office. Desktop Metal’s Studio System 2 Metal 3D Printer extrudes a metal filament (in the form of rods) to create the desired geometry. You don’t need a removal step for the plastic binder that holds metal dust in a filament (or associated equipment) when printing with 316L stainless steel. Impressions from the Studio system are transferred directly to the accompanying furnace, which first heats the parts to remove all binders from the parts, then increases the temperature to nearly melt for sintering. This printer is working and live demo can be done. Work hours: Printer: 164 jobs x 10h = 1640h Debinder: 46 jobs x 18h = 828h Furnance: 21jobs x 48h = 1008h Includes software and transformer to convert the American frequency into European.

New destoner in 3 different sizes: 5kg, 15kg or 30kg Removes foreign objects such as stones or metals from roasted coffee beans Airflow can be adjusted according to the type of coffee Housing made of powder coated stainless steel Electricity 220V/50Hz Dimensions in the pictures 5kg version: Tank volume of 10kg, 0,75kW Motor, PRICE 3 700.00 € 15kg version: Tank volume of 25kg, 1,5kW motor, PRICE 4 700.00 € 30kg version: Tank volume of 40kg, 2,2kW motor, PRICE 5 700.00 € Discount possible if purchased along with a Coffee Roaster Shipping worldwide possible Type "The roasters agency" in the search bar to see other listings

Width 70 cm Year of construction: 2001 Vertical stacking delivery Desta BAS-FSA 700 Press station Price on request. We deliver and install worldwide!

Desma rubber injection molding machine 969.100 In the machine to replace is the control cable Year 1997

Pneumatic cylinder DESTACO K 3000 - 200 - 6 stroke: 200 mm rod diameter Ø 65 mm Dimensions: 540 x 130 x 130 mm

DESMA injection molding machine for direct injection of shoes. Injects PVC, TPR and TPU granules. 12 stations mean that 6 pairs of shoes are injected at the same time. The machine consists of a turntable (carousel), a hydraulic part, an injection unit and a control cabinet. The machine after the extensive renovation of the screw and cylinder and other wearing parts. The machine is in very good condition. Sn. 11-17706 We have 5 pieces of this machine and many more other machines from a shoe factory.

Manufacturer: FIDI Destlliergerät, Type: RS 250 AX, Year: 2016, FREETEXT1: Füllkapazität 20-30 Liter, FREETEXT2: Kesselvolumen 40 Liter, FREETEXT3: Lösungsmittel 4-5 Stunden, FREETEXT4: Spülwasser ca.12 Stunden, FREETEXT5: Abkühldauer 3-7 Stunden, FREETEXT6: Betriebtemperatur 50-200 Grad, FREETEXT7: Kw Leistung ca 2,1, Year :2016

Manufacturer: Fraxinus - Desco , Year: 2008, Superordinate control: yes, Cycle performance units/min: 5, Work piece width min-max mm: 155-1070, Min.-max. workpiece length in mm: 482-3000, Min.-max. workpiece height in mm: 18-250, Vorschub der Montage m/min: regelbar, Roboterbeschickung für Pappe: yes, Stacking locations: 3, Ausrichtlineal Montagelinie: yes, Length of wrapping belt mm: 25000, Roboteraufstapelanlage: yes, Stacking locations: 3, Carton at pallet: yes, Stacking patterns possible: yes, Discharge station: 1, Einschleussstation: yes, Packing belts: 1, Automatic carton sealer: yes, Folieneischlagstation : yes, Folienbreite max mm: 1500, Foleinschrumpfanlage: yes, Stacking robot: yes, Stacking locations: 2, Pallet buffer: yes, Automatic pallet wrapper: no, Pallet buffer: yes, Feeding speed adjustable: yes, Feed out conveyor for pallets: yes, Sice - euro-pallet: yes, Belt width m ...

V-belt pulley, pulley -Manufacturer: Desch, V-belt pulley pulley 5 grooves SPA 160x5 2517 -V-belt width: 13 mm -Receptacle: Ø 50 x 45 mm taper bushing 2517-50 -Quantity: 1x pulley available -Dimensions: Ø 165 x 80 mm -Weight: 6.4 kg

V-belt pulley, pulley -Manufacturer: Desch, V-belt pulley pulley 4 grooves SPB 150x4 2517 -V-belt width: 17 mm -Receptacle: Ø 45 mm taper bushing 2517-45 -Quantity: 1x pulley available -Dimensions: Ø 155 x 80 mm -Weight: 5.9 kg

Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Desoutter, AFD - AUTOM. FEED DRILLS AND TAPS -Type: AFDE-40 -Speed: 3800 rpm -Multi-spindle head: Type 174183 distance 10 to 67 mm -Motor: ABB 0.33 kW -built-in collets: Ø 3 mm -Dimensions: 890/220/H150 mm -Weight: 12 kg

Makiereinrichtung - Marking device Desta ZM900 Serial-No. 529 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Drill Desma-Werke HS 30VG In the case of the drill, the motor must be rewound.

Inv. Num. : 7690 Type: GMS 1012 SP Producer: Désintégr'arc Created: 2019 Parameters: Maximum operating current: 32 A Machine weight: 450 kg

Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm. Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit absorption: M6 - rotary switch for clockwise and counterclockwise rotation (rotary ring control) - without screwdriver shutdown - compressed air control cable 4 mm - compressed air connection for screwdriver function min. 10 mm - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg Good condition 3 pieces available, price per screwdriver; used

Closing unit Clamping force t: 200 Opening path mm: 650 Holm size mm: 520 x520 Installation height min/max mm: 350 Plate size: 820 x 820 Spraying unit Screw diameter mm: 820 x 820 Spray weight gr: 440 Spray volume cm3: 510 Spray pressure bar: 1910 Dimensions and weights Dimensions LxWxH m: 5.5 x 1.3 Machine Weight Kg: 10000 Other Battery Euromap 12

Standard

Upright stack delivery with pressing unit; working condition

Laboratory roller for coating laboratory sheets (sample sheets) and plastics

Technical data: - Threaded drilling capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Tool quick change holder size 2 diameter 31 - various inserts for tool quick-change recording - Table area with 5 T-slots 2050 x 900 mm . Table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chuck 250 mm - Pneumatic connection with pressure reducer - mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

specifications: - Threaded drilling capacity approx. M 3 - M 12 - Unloading up to approx. 500mm - Stroke to approx. 600mm - Speeds approx. 80 - 1000 rpm - 2 St. spring pulls / balancers - Pneumatic connection 6 - 8 bar - mobile underframe - Space required approx. W 1000 x H 2000 x D 800 mm - Weight approx. 80 kg

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automated system for picking packs of bottles or cartons from a pallet. The equipment ensures continuous feeding of empty bottles to the rest of the line. Safety light curtain. UniOP control panel. History, documentation and wiring diagram available

- Please note! Price per piece! - Suitable for several motors - LS-4000 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes int ...

pneumatic power clamps, horizontal clamps, compact clamps, clamping devices, pneumatic power clamps -Type: 82L32-143C8H0 -Number: 4x available -Price: per piece -Weight: 2.1 kg/piece

pneumatic power clamp DE-STA-CO 82G50-103C004 SA-21871-76 82E50-2F Max 30 V AC/DC Max 8 bar New Dimensions: 350 x 240 x 75 mm

pneumatic power clamp DE-STA-CO 82G50-113C006 SA-27144-76 8PW-023-1 Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 240 x 75 mm

pneumatic power clamp DE-STA-CO 82G50-114C006 SA-27144-76 8PW-023-1 Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 240 x 75 mm

400v ; 3,6kW

unused

pneumatic power clamp DE-STA-CO 82G50-153C000 SA-21871-76 82E50-2F Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 160 x 75 mm

pneumatic power clamp DE-STA-CO 82G50-114C004 SA-21871-76 82E50-2F Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 240 x 75 mm

pneumatic power clamp DE-STA-CO 82G50-443C800 8PW-023-2 Max 30 V DC Max 8 bar New ! Dimensions: 350 x 180 x 75 mm

pneumatic power clamp DE-STA-CO 82G50-411C800 8PW-023-2 Max 30 V DC Max 8 bar New ! Dimensions: 350 x 250 x 75 mm

pneumatic power clamp DE-STA-CO 82L40-103C800 SA-26611 8PW-016-1 Max 30 V DC Max 8 bar New ! Dimensions: 260 x 180 x 65 mm