demag crane 5 used for sale

Control type: NC 4 Number of hours: 32,500 hours Closing force: 80 T Opening stroke: 450 mm Between columns: 420 x 420 mm Tray dimensions: 600 X 600 mm Mini/maxi mold: 250/mm Max distance between trays: 700 mm Injection: Screw diameter: 35mm Screw length: 20 D cm3: 168 Bars: 2020 General: Motor power: 15 kW Heating power: 9 kW Closing weight: 4 T Injection weight: Dimensions length: 4.2 m Width dimensions: 1.4m Height dimensions: 4.8 m Options: Cores: 1 Robot interface: yes Bi metal: yes

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Calibration - Ergocheck 1.2016 — Replacement of a faulty hydraulic system pressure sensor. scheme 1.2015 – repair of the nozzle rod. units 2.2014 — Replacement of the chamber, auger and tip 1.2013 — Replacement of the screw and tip 6.2012 – Repair, re-sealing of the injection cylinder. units 11.2010 — Repair of proportional valve 4.2008 — Replacing the control panel display 3.2008 — Replacing the proportional valve 3.2008 — Calibration — Ergocheck 12.2007 — Replacing the tip

Closing unit Clamping force [kN] 3300 Dimensions of mounting plates (hxv) [mm] 1040 x 950 Clearance between columns (hxv) [mm] 710 x 630 Min./max. mold height [mm] 330/710 Maximum opening width [mm] 1385 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1039 Injection weight [g] 940 Injection pressure [bar] 1400 Electrical and hydraulic equipment Rated power of the pump motor [kW] 63.3 Heater power [kW] 27 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (length x width x height) [m] 6.5 x 3.8 x 2.3 Side unit: screw diameter 35mm injection weight approximately 150g

Demag Extra 100-430 injection molding machine Year of manufacture -2004 NC control 4 Clamping force - 1000 kN Column spacing - 400X400 mm The dimensions of the boards are 540X540 mm Min. mold height - 250 mm Screw diameter - 40 mm Injection weight - 208 g Injection volume - 231 cc Injection pressure - 2025 bar Hydraulic cores - 1 Air valves - 1

Demag Concept 300-630/2300 injection molding machine Year of production - 2006 Clamping force - 3000 kN Spacing between columns - 950 X 950 mm Table size - 630 x 630 mm screw diameter - 80 mm injection volume 1583 cc injection weight - 1430 g injection pressure - 1437 bar machine weight - 14,600 kg dimensions of the machine 6.5 x 1.9 x x 2.3 m number of man-hours worked 75299 Screw 80 mm hardened (good condition) RSP revised in 2022 2021 injection system has been completely sealed 2019 the pump along with the control valve and Hall sensor has been completely revised

Demag Ergotech Viva 800-400 Shot weight: 205 g Closing force: 800 kN Screw diameter: 40 mm Injection pressure: 1830 bar Column spacing: 400 x 400 mm Plate size: 590 x 580 mm Mold height min: 250 mm Type of control: NC4 German Installed power: 26.1 kW Working hours: 70 180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m A string of cores

Injection weight: 150 g Closing force of 1000 kN Screw diameter: 35 mm Injection pressure: 1865 bar Column spacing: 420 x 420 mm Plate size: 600 x 600 mm Min. mold height: 200 mm Control type: ERGOcontrol Language German Installed power: 46.7 kw Operating hours: 67455 h Weight: 6500 kg Dimensions: 4.6 x 1.5 m Core pull Yes Robot socket Yes Air valve Yes Heating control for molds Yes Elbow closing unit Yes

Screw diameter [mm] 22 Injection volume [cm3] 22.8 Injection weight [g] 20 Injection pressure [bar] 2400 Electric-hydraulic equipment Nominal power of the pump motor [kW] 7.5 Heater power [kW] 3.7 Dimensions and weight Net weight with control cabinet [t] 2.6 Dimensions (L x W x H) [m] 3.20x1.30x1.80 m

Demag Ergotech Extra 80-430 Year of production - 2002 Technical data of the closure Closing force: 800 kN Clearance between columns vertical: 400 mm Clearance between columns pos: 400 mm Size of table plates pos: 540 mm Dimension of the table plates vertical: 540 mm Mold height min: 250 mm The distance between the plates: 700 mm Opening distance: 450 mm ejector: 150 mm throwing: 41 kN Centering D of the movable plate: 125 mm Centering D of a fixed plate: 125 mm tool weight: 700 kg Injection technical data screw diameter: 40 mm Injection volume: 231 ccm Injection pressure: 2025 bar Screw path: 150 mm plasticization rate: 160 g / s PS Air injection rate: 33 g / s PS Mouthpiece path: 200 mm Dimensions and weight Dimensions in: 4.2m x 1.32m x 2m Total weight in: 3,900 kg

Demag Extra 150-430 Clamping/injection matrix Clamping force [kN] 1650 Mounting plate dimensions (hxv) [mm] 705 x 700 Clearance between columns (hxv) [mm] 475 x 475 Min./max. mold height [mm] 250-480 Maximum opening width [mm] 930 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 231 Shot weight [g] 205 Injection pressure [bar] 2020 Electro-hydraulic equipment Power rating of the pump motor [kW] 18,5 Power rating of barrel heating [kW] 11,1 Dimensions and weight (approximately) Net weight with control cabinet [t] 5,3 Dimensions (L x W x H) [m] 4,9 x 1,5 x 2,0

Demag EXTRA 200-840 ECQ, without hopper Make: Demag Type: EXTRA 200-840 Construction year: 2007 Steering: NC4 Location: Poland Country of origin: Poland Screw diameter 50 mm Stroke volume: 442 cc Shot weight: 400 g Injection pressure: 1646 bar Closing force: 2000 kN Distance between bars: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Dimension: 6.7 x 1.8 m Weight: 9000 kg Furnishing Robot interface: EUR 67 Air valve: 1x

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 830 x 830 Clearance between columns (hxv) [mm] 560 x 560 Min./max. mold height [mm] min 310 Maximum opening width [mm] 1335 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 451 Injection weight [g] 410 Injection pressure [bar] 1946 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 15 Dimensions and weight Net weight with control cabinet [t] 9 Dimensions (length x width x height) [m] 5.7 x 1.7 x 2.1

Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 770 x 770 Clearance between columns (hxv) [mm] 520 x 520 min./ max. mold height [mm] min275 max 685 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 40 Injection weight [g] 260 Injection pressure [bar] 1600 Electric-hydraulic equipment Nominal power of the pump motor [kW] 22 Heater power [kW] 11.3 Dimensions and weight Net weight with control cabinet [t] 6.5 Dimensions (L x W x H) [m] 5.3 m x 1.5 m x 2 m

Clamping force [kN] 350 Dimensions of mounting plates (hxv) [mm] 410 X 410 Clearance between columns (hxv) [mm] 280 x 280 injection unit Screw diameter [mm] 25 Injection volume [cm3] 48 Injection weight [g] 43 Injection pressure [bar] 2441 Electric-hydraulic equipment Nominal power of the pump motor [kW] 11 Heater power [kW] 5 Dimensions and weight Net weight with control cabinet [t] 1.8 Dimensions (L x W x H) [m] 3.20x1.30x1.80 m

Demag Extra 160-600 Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 770 X 770 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] 275 Maximum opening width [mm] 1085 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 291 Shot weight [g] 291 Injection pressure [bar] 1910 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 11,3 Dimensions and weight (approximately) Net weight with control cabinet [t] 6,4 Dimensions (L x W x H) [m] 5,3 x 1,5 x 2,0

Demag Ergotech Compact 1500-610 Clamping/injection matrix Clamping force [kN] 1500 Mounting plate dimensions (hxv) [mm] 750 x 750 Clearance between columns (hxv) [mm] 500 x 500 Injection unit Screw diameter [mm] 50 Shot weight [g] 330 Injection pressure [bar] 1973 Dimensions and weight (approximately) Net weight with control cabinet [t] 7 Dimensions (L x W x H) [m] 5.20x1.60x2.10

Demag Ergotech 800-310 Clamping/injection matrix Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 540 x 540 Clearance between columns (hxv) [mm] 400 x 400 Injection unit Screw diameter [mm] 35mm Shot weight [g] 149 Injection pressure [bar] 2024 Electro-hydraulic equipment Power rating of the pump motor [kW] 15 Power rating of barrel heating [kW] 9,4 Dimensions and weight (approximately) Net weight with control cabinet [t] 3,6 Dimensions (L x W x H) [m] 4.05x1.27x1.91

Demag Ergotech Concept 110/470-600 Clamping/injection matrix Clamping force [kN] 1100 Mounting plate dimensions (hxv) [mm] 670 x 660 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 250 Maximum opening width [mm] 850 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 398 Shot weight [g] 359 Injection pressure [bar] 1550 Electro-hydraulic equipment Power rating of the pump motor [kW] 33,3 Power rating of barrel heating [kW] 15,7 Dimensions and weight (approximately) Net weight with control cabinet [t] 5,6 Dimensions (L x W x H) [m] 4,9 x 1,5 x 2,0

Demag Ergotech 2000-840 Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 830 x 830 Clearance between columns (hxv) [mm] 560 x 560 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 636 Shot weight [g] 570 Injection pressure [bar] 1351 Dimensions and weight (approximately) Net weight with control cabinet [t] 10 Dimensions (L x W x H) [m] 5.70x1.70x2.10

Demag System 650/1000-6400 Closing unit Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1450 x 1350 Clearance between columns (hxv) [mm] 1000 x 900 Min./max. mold height [mm] 450 - 950 Maximum opening width [mm] 1880 Injection unit Screw diameter [mm] 95 Injection volume [cm3] 3367 Injection weight [g] 3060 Injection pressure [bar] 1895 Dimensions and weight Net weight with control cabinet [t] 33.5 Dimensions (length x width x height) [m] 11 X 2.5 X 2.6

Closing unit Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1200 x 1100 Clearance between columns (hxv) [mm] 870 x 710 Min./max. mold height [mm] 380/820 Maximum opening width [mm] 1530 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Injection weight [g] 690 Injection pressure [bar] 1905 Electrical and hydraulic equipment Rated power of the pump motor [kW] 45 Heater power [kW] 23 Dimensions and weight Net weight with control cabinet [t] 20 Dimensions (length x width x height) [m] 7.9 x 2.2 x 2.5

Brand DEMAG Type ERGOTECH compact 800-310 year of construction 1996 Clamping unit clamping force 80 ton opening stroke 450 mm tie bar dimension (h x v) 400 x 400 mm Installation height min. 250 mm Platen size (h x v) 580 x 590 mm Injection unit Screw diameter 35 mm Injection volume 168 cm³ Injection weight PS 149 gr Injection pressure 2020 bar Dimensions and weights Dimensions LxWxH 3.9 × 1.4 × 1.9 m Machine weight 3700 kg

Producer DEMAG Type IntElect 80-370-100 NC 4 All electric Year 2006 Clamping unit Clamping force 80 ton Opening stroke 850 mm Distance between tie bars 370 X 370 mm Mould height min. 200 mm Mould height max. 510 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 22 mm Injection volume 37 cm³ Shot weight 32 g Injection pressure 2580 bar Measurements and weight Dimensions 4,50 X 1,28 X 1,95 m Machine weight 4750 kg

Producer DEMAG Type Extra 35-115 Year 2003 Clamping unit Clamping force 35 ton Opening stroke 350 mm Distance between tie bars 350 x350 mm Opening width 530 mm Platen size (h x v) 390 x390 mm Injection unit Screw diameter 22 mm Injection volume 39 cm³ Shot weight 35 g Injection pressure 2500 bar Measurements and weight Dimensions 3,05 x 1,06 x 1,65 m Machine weight 1600 kg Dimensions LxWxH part 1 3,5 x 1,2 x 1,9 m

Brand DEMAG Type ERGOtech system 1000-200 year of manufacture 1998 Clamping unit clamping force 100 ton opening stroke 500 mm beam dimension (h x v) 420 x 420 mm Installation height min. 250 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 25 mm Injection volume 61 cm³ Injection weight PS 54 gr Injection pressure 2752 bar Dimensions and weights Dimensions LxWxH 4,2 x 1,4 x 2,0 m Machine weight 4200 Kg Additional information & extras Core pull 1 pc.

Brand DEMAG Type ERGOtech system 350-80 year of manufacture 1997 Clamping unit Clamping force 35 ton opening stroke 350 mm Beam dimension (h x v) 320 x 320 mm Installation height min. 180 mm Platen size (h x v) 460 x 450 mm Injection unit Screw diameter 18 mm Injection volume 23 cm³ Injection weight PS 20 gr Injection pressure 2868 bar Dimensions and weights Dimensions LxWxH 3,3 x 1,2 x 2,0 m Machine weight 2700 kg

Producer DEMAG Type Ergotech pro 50-270 Year 1997 Clamping unit Clamping force 50 ton Opening stroke 400 mm Distance between tie bars 355 x 355 mm Mould height min. 210 mm Platen size (h x v) 540 x 540 mm Injection unit Screw diameter 35 mm Injection volume 106 cm³ Shot weight 95 g Injection pressure 2573 bar Measurements and weight Dimensions 3,65 x 1,15 x 1,18 m Machine weight 3600-2500 kg

Brand DEMAG Type ERGOtech system 800-310 year of manufacture 1998 Clamping unit clamping force 80 ton opening stroke 450 mm Beam dimension (h x v) 370 x 370 mm Installation height min. 200 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 35 mm Injection volume 168 cm³ Injection weight PS 149 gr Injection pressure 2020 bar Dimensions and weights Dimensions LxWxH 4.1 x 1.4 x 2.0 m Machine weight 3700 kg

Producer DEMAG Type IntElect 80-370-100 NC4 All electric Year 2006 Clamping unit Clamping force 80 ton Opening stroke 850 mm Distance between tie bars 370 X 370 mm Mould height min. 250 mm Mould height max. 510 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 22 mm Injection volume 37 cm³ Shot weight 32 g Injection pressure 2580 bar Measurements and weight Dimensions 4,50 X 1,28 X 1,95 m Machine weight 4750 kg

Producer DEMAG Type intElect 50/330-100 NC4 All electric Year 2009 Clamping unit Clamping force 50 ton Opening stroke 260 mm Distance between tie bars 330 x 330 mm Mould height min. 150 mm Mould height max. 350 mm Platen size (h x v) 500 x 490 mm Injection unit Screw diameter 25 mm Injection volume 51 cm³ Shot weight 46 g Injection pressure 2005 bar Measurements and weight Dimensions 3,97 x 1,19 x 2,21 m Machine weight 3300 kg Additional Information: 1 Anguß-Picker Fa. Wittmann W702 year 2008

Producer DEMAG Type 60/420-200 NC5 Year 2006 Clamping unit Clamping force 60 ton Opening stroke 600 mm Distance between tie bars 420 x 420 mm Mould height min. 200 mm Opening width 750 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 25 mm Injection volume 61 cm³ Shot weight 54 g Injection pressure 2752 bar Measurements and weight Dimensions 4,1 x 1,4 x 4,2 m Machine weight 3950 kg The machine received a new cylinder and a new screw in December 2022

Inv. Num. : 6298 Type: 1000-430 Producer: DEMAG Created: 1995 Parameters: Clamping force: 100 t Screw diameter: 40 mm Injection capacity: 231 cm³ Injection mass: 205 g Min. height of clamping plate: 580 mm Min. width of clamping plate: 590 mm Distance between uprights (horizontal): 400 mm Distance between uprights (vertical): 400 mm Opening the mold: 500 mm Machine length: 4200 mm Machine width: 1400 mm Machine height: 1900 mm Injection weight: 4200 kg

Demag concept 420/810-2300 year 06 We offer a Demag injection molding machine in working condition. Used only in morning shifts and in semi-automatic mode. Must be seen in operation at our injection plant

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Screw diameter; 95 mm Injectable volume: 3360cm3 Injection pressure: 1895 bar Column width: 1000 x 900 mm Minimum mould thickness: 40 mm max: 950 mm Aperture stroke: 930 mm Cores: 4 Robot Interface: Yes Options: Retractable Column - Electric Dosing Motor 24 Zones Mold Heater Magnetic trays 8-point sequential injection Blow guns: 2 3-axis robot

This Sumitomo Demag Systec 1300 1500-9500 Servo Injection moulding machine was manufactured in the year 2019 and has 17522 production hours, of which 3695 are heating hours.

This SUMITOMO SHI DEMAG Ergotech 350 Concept Injection moulding machine was manufactured in the year 2003 in Germany. The machine has a clamping force of 3500 kN and a screw diameter of 60 mm.

This SUMITOMO SHI DEMAG 1300-8000 injection moulding machine was made in 2010. The machine has a clamping force of 13000 kN and a screw diameter of 110 mm. It Includes a robot MASTER MATTIC RB400CN.

Injection unit Screw diameter: 35 mm Calculated injection volume: 168 cm3 Material pressure: 2000 bar Closing unit Closing force : 1000 kN Min. mold thickness: 320 mm Other Commissioning: 2006 Tonnage: 100

Ref. no.: 18315 Hersteller: DEMAG Year of construction: 2002 Clamping unit Clamping force: 350 ton Opening stroke: 675 mm Distance between tie bars: 630 x 630 mm Mould height min.: 330 mm Mould height max.: 710 mm Platen size (h x v): 950 x950 mm Injection unit Screw diameter: 70 mm Injection volume: 1212 cm³ Shot weight: 1090 g Injection pressure: 1877 bar Measurements and weight Dimensions: 6,5 x 1,9 x 2,2 m Machine weight: 16000 kg Robot Producer: Demag Robot Sytem Type: CNC-6 Year: 2002

Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

Inv. Num. : 7418 Type: Concept 420/810-2300 Producer: Demag Created: 2006 Parameters: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection mass: 800 g Height of the clamping plate: 1200 mm Width of clamping plate: 1100 mm Distance between uprights (horizontal): 800 mm Distance between uprights (vertical): 710 mm Maximum spraying pressure: 2420 bar Machine length: 7900 mm Machine width: 2200 mm Machine height: 2500 mm Injection weight: 20000 kg

Ref. no.: 18383 Hersteller: DEMAG Year of construction: 2008 Clamping unit Clamping force: 420 ton Opening stroke: 770 mm Distance between tie bars: 820 X 820 mm Mould height min.: 380 mm Mould height max.: 825 mm Platen size (h x v): 1200 X 1100 mm Injection unit Screw diameter: 60 mm Injection volume: 890 cm³ Shot weight: 810 g Injection pressure: 2420 bar Measurements and weight Dimensions: 8,2 X 2,2 X 2,4 m Machine weight: 22300 kg Additional information & extras Core pull: 4 pcs Robot Producer: Remak Year: 2008

Key data: 100000 kN, 149 g/PS, 35 mm

Clamping force: 100 t Year of construction: 2001 Injection weight in PS: 149 g Control Type: NC4 Injection unit: .../310 Screw diameter: 35 mm Spec. Injection pressure: 2020 bar Spray volume: 168.3 cc Injection weight in PS: 149 g Hydr. Drive power: 18.5 kW Cylinder heating capacity: 9.4 kW L/D screw ratio: 20 Clamping unit: 100/... Clamping force:: 100 t Size of clamping plates: 600 x 600 mm Lights spar spacing: 420 x 420 mm Ejector force: 41.2 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 220 l Weight: 4800 kg Dimensions(m) LxWxH: 4.3 x 1.4 x 2.0 m Equipment: 1 x Hydraulic Core 1 x Pneumatic Valve

Key data: 250000 kN, 690 g/PS, 60 mm

Clamping force: 250 t Year of construction: 2008 Injection weight in HP: 690 (hp) g Control Type: NC4 Injection unit: .../1450 Screw diameter: 60 mm Spec. Spray pressure: 1905 bar Spray volume: 763 ccm Injection weight in HP: 690 (hp) g Clamping unit: 250/... Clamping force:: 250 t Size of clamping plates: 950 x 950 mm Lights spar spacing: 630 x 630 mm Tool installation height: 330...710 mm Aperture travel: 450 mm Max. plate spacing: 1160 mm General information: Delivery Time: Dostępna Fuel tank capacity OIL: 700 l

Clamping force: 35 t Year of construction: 2006 Injection weight in PS: 30 g Control Type: NC4 Injection unit: .../80 Screw diameter: 22 mm Spec. Injection pressure: 2061 bar Spray volume: 34.2 cc Injection weight in PS: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit: 350/... Clamping force:: 35 t Size of clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Aperture travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm General information: Delivery Time: Natychmiast Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment Filling funnel Sorting flap bimetallic plasticizing structure hydraulic core on movable plate

There are two Injection Moulding Machines Demag Ergotech System 250/630-1450 available, clamping force 250t, clear tie bar width: 630mm, operating pressure: 190bar, weight: 13.1t, year of construction machine 1/ 2: 2001/ 2006, with documentation, an inspection is possible.

Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible.