demag crane 5 used for sale

LENGTH :17200M DOUBLE GIRDER

Demag Jib crane 3 meter / 250 kg

Demag Jib crane 2 meter / 250 kg

Demag Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 4000 mm Drop: 2000 mm

Abus Jib crane 3 meter / 500 kg

Height from floor to lifting hook: 5 meter Horizontal movement of hoist: 6 meter Kind of: jib crane Capacity: 1500 kg

Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book

Abus Jib crane 3 meter / 250 kg

Abus Jib crane 2.5 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

Abus Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 4000 mm

Abus Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 5000 mm Drop: 3500 mm

Abus Jib crane 250 kg Kind of: jib crane Capacity: 250 kg Span: 7000 mm

A workshop crane is offered for lifting and maneuvering engines, assemblies, machine components, and heavy workshop parts. Max. lifting capacity: 2000kg, Load capacity per boom position: 2000kg/1700kg/1500kg, Design: mobile and foldable, Min./max. hook height: 175mm/2490mm, Leg height: 208mm, Boom: telescopic, Min./max. boom length: approx. 1295mm/1595mm, Weight: 165kg, Overall dimensions in working position: X/Y/Z: approx. 1900mm/1170mm/2490mm. Inspection possible by appointment.

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - / Contact us at -

Traverse for a crane 3t - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Traverse for a crane 3t Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Traverse for a crane 3t Price: 1200 EUR Download PDF Traverse for a crane 3t Size 1145x1940mm Capacity 3000 kg 4 length-adjustable chains terminated with a hook Main hook with adjustable position and lock The traverse has a base on wheels for easy movement Production Pfeiffer, Germany. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our  ...

Mobile crane Battery truck - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Mobile crane Battery truck Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Mobile crane Battery truck Price: 9500 EUR Download PDF Mobile crane Battery truck Device bought from stock, condition as shown in the photos, brand new, only 50 hours of work. Hydraulic drive. Capacity 700 kg Control from the steering wheel or the desktop. Charger included. Smooth speed control, safety button, horn, ignition switch. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do no ...

E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used

arm length: 4000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5000 mm weight max. in kg: 500 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.35 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope -Crane rope: Demag wire rope Ø 16 mm -Length: 35.0 m -Item no.: P 600 H13 4/1 589 440 44 -Rope type: IWRC U(bk) -other crane ropes also available -Transport dimensions: Ø 420 x 155 mm -Weight: 37.9 kg

Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 240/90/60 mm -Weight: 1.7 kg

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63314301 Year of construction: 1992Load capacity 1000 kgHook travel 4.1 metersDistance suspension to load hook 480 mmMain lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length of operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz.2 load trains = 1000 kg- emergency stopWeight 43 kggood condition; used

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63207040 Year of construction: 1993Load capacity 1000 kgHook travel 2.6 metersDistance suspension to load hook 450 mmHood lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length operating bottle approx. 1.7 metersMains connection 400 volts, 50 Hz.2 load lines = 1000 kg- emergency stopWeight 46 kggood condition; used

Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm

weight max.: 500 kg throat: 5.000 mm base plate: 0,7 x 0,7 m dimensions of the machine ca.: 5,14 x 0,70 x 4,75 m Crane DEMAG - DC-COM 1/1 H5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column jib crane, overhead crane, workstation crane -Manufacturer: DEMAG, Column jib crane, lifting capacity 250 kg -Base plate: 550 x 550 mm -Protrusion: 2,860 mm -Total height: 5110 mm -Hook height: 3170 mm -Swivel range: 270° -Chain hoist: can be supplied for an additional charge -Transport dimensions: 5110/800/H550 mm -Weight: 380 kg

Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope -Crane rope: Demag wire rope Ø 7.5 mm -Length: 38.0 m -Art.No.: 7.5 mm- 8x19 SES, 581 690 44 -Rope type: Wire rope 8 × 19 SES (SZ) -other crane ropes also available -Transport dimensions: Ø 500 x 60 mm -Weight: 9.5 kg

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

Brake ring conical, 9v 532KB160, Demag, new Special offer! If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has never been used and is in mint condition. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...

Crane control system, controller, counter -Manufacturer: DEMAG, Crane control controller -Type: PRVZ2-A00 -Item No.: 52501784 -Voltage: 220 V -Dimensions: 110/60/H75 mm -Weight: 0.3 kg

Crane control system, controller, safety control system, safety switch, safety sensor, overload release power sensor, gear limit switch -Manufacturer: DEMAG, Crane control gearbox limit switch set, original packaging -Type: DGS 3 -142 -Item No.: 875 200 44 -Cardboard dimensions: 250/120/H115 mm -Weight: 1.0 kg

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

Injection moulding machine Demag erg. 250/560 840 BJ 2001

Clamping Force: 200 ton

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

This 3-axis DEMAG Erdotech 500-3300 hydraulic injection moulding machine was manufactured in 2005. It features a screw diameter of 70 mm and a shot weight of 1,230 g. The machine has a maximum daylight of 1,450 mm and includes a handling system with a Wittmann linear robot. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Erdotech 500-3300 machine we have for sale. Contact us for further details.

Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous  ...

Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details.

Key data: 6500 , 95

Demag 650 T type Ergotech 650-520 Année : 1997 Commande : NC4 Force de fermeture: 650 T Diamètre vis : 95 mm Volume injectable : 2835 cm3 Poids de l’injection en PS : 2550 gr Pression d’ injection : 1832 bars Course d’ouverture : 930 mm Distance entre colonnes : 1000 x 900 mm Dimensions des plateaux. : 1450 x 1350 mm Epaisseur min max moule. : 450 - 950 mm   Dimensions presse : 5,50 x 2,40 x 2,20 m Poids machine. : 35 500 kg ( 23500 kg + 12000 kg )

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

Crane control system, controller, safety control system, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, gear limit switch, contact evaluator, frequency evaluator -Manufacturer: DEMAG, Crane control resistor unit, original packaging -Type: Dematic VWID2-B00 -Item No.: 52896484 -Cardboard dimensions: 135/85/H40 mm -Weight: 0.1 kg

Suspension crane runway Crane system DEMAG type KBK 1Year of construction approx. 2000Monorail overhead track with monorail crane bridgeLight crane system system made of KBK modular system profilesLifting capacity: 125 kgSpan: 5 metresDistance longitudinal rails: 4.1 metresLongitudinal beam length complete: 12 metresGirder profile cross beam = KBK1Girder profile longitudinal rails = KBK1Consisting of:29 metres System profile KBK-1 (4x 6000 mm + 1x 5000 mm)1 piece carriage for the crane suspension2 pieces Double carriage for the longitudinal rails10 pieces Screw claws for the

Wall slewing crane DEMAG type KBK 2Demag No. boom: KBK- 982 040 44Demag No. wall bracket : 85104044Year of construction 2000Lifting capacity: 500 kgRadius: 4000 mmSwivel range 270Wall mounting plate: 1170 x 440 mmHeight UK- Boom to OK- Wall bracket: 1000 mmFlange plate Wall bracket to middle Bolt: 270 mmTotal length Flange plate Wall bracket to boom tip: 4330 mm: - Boom profile C-profile rail DEMAG KBK 2- Carriage for C-profile rail DEMAG KBK 2- Original paint yellowWeight 170 kgVery good conditionPrice without

Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.

Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used