demag crane 5 used for sale

Crane motor, spare motor, DC motor DEMAG GDH 140 D2/1115 ( GDH140D2/1115 ) 2668009 9,9,000 5 kW 3135 rpm 400 V DC Excitation: 170 V DC Shaft diameter: Ø 32 mm Wavelength: 35 mm Groove width: 10 mm Flange diameter: Ø 280 / 318 x 318 mm bolt circle diameter: Ø 355 mm hole diameter: Ø 17.5 mm IP55 used, tested ! Dimensions: 780 x 320 x 375 mm

Crane motor, spare motor, electric motor DEMAG KBA 80 A 4 R ( KBA80A4R ) 0.25 kW 1380 rpm 220 / 380 V shaft:Ø 18 mm flange: 125 x 125 mm used, tested ! Dimensions: 350 x 260 x 220 mm

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Volume flow rate: 7.3 m³/min -Engine power: 45 kW -Max. pressure: 10 bar -Mileage: 65,305 h -Weight: 1200 kg

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover set -Lid: Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 set available -Transport dimensions: 350/345/H70 mm -Weight: 5.6 kg

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover set -Lid: Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 set available -Transport dimensions: 350/345/H70 mm -Weight: 5.6 kg

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover -Lid: 345 x 340 mm / Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 piece available -Transport dimensions: 345/340/H60 mm -Weight: 2.8 kg

Gearboxes, spur gears, bevel gears, worm gears, crane gearboxes -Manufacturer: Demag, Gearbox type 52 DF -Translation: i = 10.7 -Shaft: Ø 25 x 60 mm -Dimensions: 230/252/H252 mm -Weight: 17.2 kg

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 260 mm, unused -Groove width: 24 mm -Hole: Ø 50 x 45 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 260 x 45 mm -Weight: 6.6 kg/pc.

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 420 mm -Item No.: 829676.44-01 -Groove width: 37 mm -Hole: Ø 70 x 55 mm -Quantity: 1x pulley available -Dimensions: Ø 420 x 50 mm -Weight: 20.1 kg

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 330 mm -Groove width: 32 mm -Hole: Ø 110 x 45 mm -Quantity: 1x pulley available -Dimensions: Ø 330 x 45 mm -Weight: 18.2 kg/pc.

Load measuring device, overload protection -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 1.25/2.75 -Item No.: 49189444 -Individual components: see photos -Cardboard dimensions: 290/220/60 mm -Weight: 1.1 kg

Load measuring device, overload protection -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 0.63/2.20 -Item No.: 49169244 -Individual components: see photos -Cardboard dimensions: 285/220/60 mm -Weight: 1.1 kg

Electric motor, three-phase motor for geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor brake motor type KBV 71 A 2 -Power: 0.2 kW -Speed: 2550 rpm -Shaft: Ø 14 x 25 mm -Design: B14 -Dimensions: 275/138/H210 mm -Weight 10.2 kg

DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157  ...

Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...

DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.

Injection molding machine

Dryer ComAir DEMAG CAD 430 W/292 W Properties: Total height 1900 mm Length 1200 mm Width 1400 mm Type CAD 430 W/292 W Machines Serial No. 00/4/14381/01 Engine power 4.7 kW Permissible pressure/max. pressure refrigerant side 16/20 bar Permissible pressure/max. pressure compressed air side 16 bar Ab. Ambient temperature min./ max. +2/ +50 °C Operating voltage 400 V Phase 3 Ph Frequency 50 Hz Nominal consumption 4,700 kW Protection class IP 54 Refrigerant R 134a Description: Largest refrigerant machine charge weight 7,500 kg Fuse/Fuse max. 20A Test Group (DruckbehV) I

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

4 x Demag injection moulding machines Demag 80 to BJ 2005 Demag 420 to BJ 2003 Demag 420 to BJ 2005 Demag 420 to BJ 2008

Ref. no.: 18565 Manufacturer: DEMAG Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equip ...

Injection Molding Nose Demag ergotech 50/370-200 BJ 2000

Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) En ...

Compressor system / compressed air system composed of: Compressor Type STA-010 Maximum pressure 10 bar Output 0.9m³ per min incl. pressure tank 350l (14BAR) with filter

Key data: 500 kN, 95 g/PS, 30 mm

Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition

TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm

Ref. no.: 17507 Manufacturer: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.

Key data: 3500 kN, 70 mm

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mol ...

Key data: 2500 kN, 579 g/PS, 60 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. Its a robust option for efficient plastic processing tasks. Contact us for more information.

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

2 x injection moulding machines EL - EXIS 200 S incl. Wittmann robot cell for removal and feeding ( No IML ) EL - EXIS 300 S incl. Wittmann robot cell for removal and stacking ( no IML )

Key data: 1000 , 3420 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2001 Machine with very low working hours Type: 1000-8000 NC4 Clamping Force: 1000 T / 10 000 KN Screw Diameter: 110 mm Theoretical Injection Volume: 3801 cm³ Injection weight. : 3420 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Total Installed Power: 110 kW Oil Capacity: 2000 L Dimensions: 13.2 m x 3,20 m x 2,90 m Weight: 63 tons Machine sold with a STAR robot

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - .ucymachines/ Contact us at - sales@ucymachines

Presse à injecter DEMAG ERGOTECH 110 T Type : 110/470-430 Année: 2003 Force de fermeture : 110 T / 1100 KN Diamètre vis : 40 mm Volume injectable : 231 cm3 Pression d’injection : 2200 bars Entre colonnes : 470 x 470 mm Dimensions des plateaux : 620 x 670 mm Épaisseur moule min: 200 mm Course d'ouverture: 600 mm Poids : 5600 kg Dimensions : 4,70 x 2,00 x 1,50 m