demag crane 5 used for sale

Key data: 350 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3.1 m x 1.1 m x 1.6 m Weight: 1800 kg Screen text: German Additional equipment Picker Air valve: x1

Key data: 1500 , 210 , 40

Manufacturer: Demag Type: 150/475 - 440 concept Year of construction: 1999 Control: NC 4 Control Locking type: Knee lever Closing force: 1500 kN Tie bar spacing: 475 mm x 450 mm Plate size: 690 mm x 660 mm WZ Installation height: min 230 max 460 mm Opening distance: 450 mm Plate spacing max: 910 mm Screw: 40 mm Lifting volume: 231 ccm / 210 gram PS Injection pressure: 1855 bar general Engine: 22 kW Heater: 11.7 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 6600 kg Screen text: German Optional extras Core train: x1 central lubrication Air valve Robot interface

Key data: 350 , 78 , 30

Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct

clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spare parts for injection moulding machines Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Demag, Arburg and Krauss Maffei Valves / Proportional Valves Krauss Maffei / Rexroth MNR R900972653 + R900703217 + ZDR 6 DP0-45_40YM W80 MNR R900323180 Krauss Maffei 4WRAP-6 W7-02-21=24K4/M-561=KM / 6250961 00559499 / 00559137 Krauss Maffei 6252527 00559085 Krauss Maffei / Bosch 0 811 402 511 Krauss Maffei SDDB-3-PP-6 S520 + 6252570 Krauss Maffei 6253211 + SDDB-3-PP-6 S520 Arburg 4WRE 10 EA32-13/24Z4/M-425 Nr.41447 Arburg DBETB-10/180 41446 Arburg DBETB-10/25 41494 Arburg HS 1171-X168 176407 Arburg HS 1171-X112 160576 Arburg LS 1171 X112-10 / 83.745 Arburg Mod D681Z4807 Type: P80HXZR5HEA2-X + Mod D633-7396 TYPE A02KO4F0HXY Arburg Mod D681Z4877 Type: P80HXZR5HEA2-X + Mod D633-7468 Type A02KO4F0HXY Arburg Mod D681Z4707B Type P80HXUR5VEA2-X + MOOG Mod D633-7330  ...

Spare parts for injection molding machines Spare parts electric Demag Demag Sigmatek DKL 022 KD. 06792862 Demag Dias DTO 163 KD. 06792165 Demag Sigmatek DKL 012 KD. 06792865 Demag Dias DAO 041 KD. 06796265 Demag Dias DEC 181 KD. 06792665 Demag Sigmatek DKL 025 KD. 06793265 Demag Dias DAM 122 KD. 06792265 Demag Dias DDM 163 KD. 06792365 Demag Sigmatek DKL 013 KD. 06793065 Demag Dias DDM 164 KD. 06792465 Demag Dias DM 321 KD. 06014866 Demag Dias AO 041 KD. 06001466 Demag Dias AI 281 KD. 06001166 Demag Dias TO 323 KD. 06013666 Demag Dias DI 32W KD.06715565 Demag Dias PS 242 KD. 06029066 Demag Dias CP 126 KD. 06730365 Demag Dias AI 381 KD. 06013466 Demag Slides AO 081 KD. 06015066 Demag Dias DCP 642 KD. 06791765 Demag Sigmatek DKL 002 KD. 06111966 Demag Dias DAM 124 KD. 07024865 Demag Dias DDM 163 00733445 Demag Dias DEC 161 KD. 00703303 Demag Dias DAI 883 KD. 06 ...

Robot - Wittmann-Demag W833 / High-speed robot Year of Make: 2011 Location: Lodz, Poland Description: 4-axis robot: 4 axes are driven by servo motors (electric): X, Y-telescopic, Z; Axis C - pneumatic Travel in axes: X-900, Y-1600, Z-3000 Touch control panel The safety package for robots Robot with adapter, protective housing Description: 4-axis robot: 4 axes are driven by servo motors (electric): X, Y-telescopic, Z; Axis C - pneumatic Travel in axes: X-900, Y-1600, Z-3000 Touch control panel The safety package for robots Robot with adapter, protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

Flat gear brake motor, ADE 50 TD, Demag, mint condition -60% Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, - has very slight signs of storage, Flat gear brake motor, ADE50TD-D1.3-65-0/ 112, Demag, - Output speed 6.1/24.6 rpm - Motor speed 685/2760 rpm - Power 0.290/1.200 kW Motor protection class IP 54 Transmission ratio 112.0 - Motor installation position horizontal - Total weight, net approx. 81 kg - 380-400 V, 50 Hz, 2.10/3.20 A 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We wi ...

Electric chain hoist, 125 kg DC-Pro1 125 1/1 H5 V8/2, Demag, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - Comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Electric chain hoist, 125 kg DC-Pro1 125 1/1 H5 V8/2, Demag, used – top condition - Load capacity 125 kg - Without pendant control - Includes 4 m power and compressed air cable Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For the ...

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

Key data: 18 , 8 , 3

Screw compressor Mannesmann DEMAG SE 30 S 3 m³/min, 8 bar, 18.5 kW Good condition Test run carried out Ready for action

Demag feed station (EURO pallet dimensions) for placing pallets on the conveyor track ANR 725535 ASN 022 very good condition, year of construction 2000 Price per piece

clamping force: 800 kN injection volume: 177 cm³ screw diameter: 35 mm platen size: 580 x 580 mm Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant i ...

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 4200 kN injection volume: 1212 /292 cm³ screw diameter: 70 /15 mm platen size: 1200 x 1100 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic i ...

clamping force: 800 kN injection volume: 106 / 42 cm³ screw diameter: 30 / 22 mm platen size: 600 x 600 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for th ...

Demag Compressor 080IIH Pressure generator from 1986, complete (closed module) 1 available 505 m3/h, 6 bar. Manufacturer: Mannesmann Demag Model No.: 080IIH Type: piston compressor Serial Number: 920 501 / 78 Capacity flow rate [m3/h]: 505 Pressure outlet [bar]: 6 Power [kW]: 45,5 Year of construction: 1986 Running hours [h]: – Weight [kg]: 1.978 Dimensions LxWxH [cm]: 246x122x143

Gear motor, electric motor, electric gear motor -Manufacturer: DEMAG, gearbox type CM63 / GS -Speed: 21 rpm -Shaft: Ø 28 x 30 mm -Motor: Kobold type KGC 608.28 0.5 kW -Voltage: 220V -Protection class: IP20 -Dimensions: 490/160 / H200 mm -Weight: 25 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 705 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Price: per piece -Number: 5x available -Dimensions: 290/170/H205 mm -Weight: 13 kg

Gear motor, electric motor -Speed: 80 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 450/270/H175 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg