demag crane 5 used for sale

pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suspension crane: 2 Stück: : 1. Kran : dimensions: 2500 x 3800 mm : 125 kg : 2. Kran: dimensions: 2500 x 4800 mm : 125 kg for expample for assembly work: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 1000 kg year of manufacture 1985 -Documents: crane inspection book, operating instructions, -Base plate: Ø 685 mm -Projection: 4,390 mm -Total height: 4,350 mm -Hook height: 3,140 mm -Chain hoist: DEMAG type PK5N with main stroke 5 m/min, built in 1973 -Chain length: 3300 mm -Transport dimensions: 950/4630/H1890 mm -Own weight: 1160 kg

maximum capacity: 250 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 600 x 3,400 mm, weight approx.: 1,000 kg

Description: including Demag electric chain hoist, maximum load capacity 500 kg maximum capacity: 500 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,600 x 600 x 4,750 mm, weight approx.: 1,000 kg

Chain hoist with trolley, trolley DEMAG TYP DK2-250-K-V-F4 Bj: 1992 Payload: 500 kg Lifting speed: 4 / 1 m/min hook travel: 3 m Control cable: 1,, 5 m Voltage 380 V IP55 Chassis: RU 6 DK Flange width: 140 - 200 mm used, tested ! Dimensions: 500 x 300 x 600 mm

Radiator, heat exchanger, oil cooler MANNESMANN DEMAG 571 372 Connections: Ø 60 mm Flanges: Ø 165 mm, 100 x 100 mm Radiator network: 380 x 110 x 410 mm Aluminium radiator ! used, tested ! Dimensions: 610 x 215 x 500 mm

Radiator, heat exchanger, oil cooler MANNESMANN DEMAG 571 371 Connections: Ø 24 / 40 mm Radiator net: 740 x 110 x 600 mm Radiator made of aluminium ! used, tested ! Dimensions: 910 x 210 x 600 mm

screw size: mm injection shot weight in Polysterol: g/PS closing pressure:1100 kN

screw size: mm injection shot weight in Polysterol: g/PS closing pressure: kN

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:1250 kN

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:1250 kN

Key data: 500 kN

Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...

Key data: 500 kN

Demag Ergotech Compact 500-120 / machine in very good technical condition Year of construction: 1993 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Spray pressure: 2000 bar Dosing volume: 61.3 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 1 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 5.1 kW Total power: 20.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live  ...

Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains

Molding machine of Mag Type: Ergotech, 150/500-840 concept control: NC 4 year of construction: 2001 Clamping unit Clamping force t Gap 150 mm: 500 Holm dimension mm: 500 x 500 min/max height mm: 275 / 585 Plate size: 1085 x 1185 injection unit Screw diameter mm: 50 Injection weight gr: 402 Injection volume cm m³: 442 Spray pressure bar: 1946 Dimensions and weights Dimensions Lxwxh m: 5.2 x 1.6 x 2.1 machine weight kg: 7,800

Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650.5200 Model 2001 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot

DEMAG ET 650/5200 - non-functional broken column Robot - broken year of manufacture: 1997 v. no. 8631032 auger: 95 mm weight: 2835 cm3 closing force: 650 t clamping plates: 1450/1350 between columns: 1000/900

Fully functional machine in good condition. Screw diameter 45,0 mm Tie bar spacing (H) 500,0 mm Tie bar spacing (V) 500,0 mm Shot weight 291,0 g Pressure on material 1910,0 bar

Manufacturer: Germany Year of release: 2005 Clamping force: 1000 t Raw material injection volume: 4372cm3 Built-in mold height max: 1200 mm Built-in mold height min: 500 mm Auger diameter: 95 mm Working equipment, serviced.

DEMAG 150T NC4 ERGOTECH 150/500-610 COMPACT 2 hydraulic cores 1 pneumatic core

Screw diameter: 50 mm Calculated injection volume: 530 cm³ Length/diameter ratio: 20 L/D

Demag Ergotech 160/520-600 Santosh and Demag Ergotech 120-320 System Injection Moulding Machine Prefer to sell both together Price for both machines

screw size: unbkt. mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 150 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injection moulding machine Demag Ergotech 5000-5200 Parameters: Production year: 2001 Control: NC10 Injection unit: .../5200 Screw diameter: 95 mm Specific injection pressure: 1550 bar Injection volume: 2835 ccm Injection weight: 2550 g Tool closure system: 5000/... Clamping force: 500 t Tool plate dimensions: 1300 x 1200 mm Distance between columns: 900 x 800 mm Tool height: 400...880 mm Opening distance: 810 mm Maximum plate distance: 1690 mm Ejector stroke: 230 mm General data: Dimensions (m) LxWxH: 9,40 x 2,30 x 2,50 m Instrumentation: 6 x pneumatic cascade 2 x Hydraulic Core

Key data: 5000 , 2550 , 95

Year of construction: 2001 Clamping force: 5,000 KN with 6-axis Fanuc robot M16i , Year of construction 2001 incl. conveyor belt and safety fence Equipment: Screw: diameter 95 mm Injection weight: 2,550 gr./hp Ejector stroke: 230 mm Tie bar spacing: 900 x 800 mm Installation height min. – max.: 400 – 880 mm Max. distance between plates: 1,690 mm Opening travel max.: 810 mm Max. tool weight: 6,700 KG 6-fold cascade pneumatic 2 core pulls Robot interface Injection pressure max. 1,550 bar Control NC10

clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...

Column slewing crane, indoor crane, workplace crane -Manufacturer: DEMAG, pillar slewing crane load capacity 250 kg -Base plate: 550 x 550 mm -Projection: 2,860 mm -Total height: 5110 mm -Hook height: 3170 mm -Swivel range: 270° -Chain hoist: can be supplied at extra cost -Transport dimensions: 5110/800/H550 mm -Weight: 380 kg

For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...

Brand DEMAG Type ERGOTECH system 500-120 NC4 year of manufacture 1998 Clamping unit clamping force 50 ton opening stroke 400 mm Beam dimension (h x v) 320 x 320 mm Installation height min. 210 mm Installation height max. 610 mm Platen size (h x v) 540 x 530 mm Injection unit Screw diameter 22 mm Injection volume 42 cm³ Injection weight PS 37 gr Injection pressure 2591 bar Dimensions and weights Dimensions LxWxH 3,6 x 1,5 x 1,8 m Machine weight 3100 kg

Brand DEMAG type Ergotech system 100/500-430 year of manufacture 2006 Clamping unit clamping force 100 ton opening stroke 500 mm Beam dimension (h x v) 400 x 420 mm Installation height min. 200 mm Installation height max. 800 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 35 mm Injection volume 168 cm³ Injection weight PS 149 gr Injection pressure 2400 bar Dimensions and weights Dimensions LxWxH 5,2 x 1,6 x 2,1 m Machine weight 5700 kg Robot Brand Wittmann type W602 year of construction 2006

Producer DEMAG Type Demag IntElect 150/520-310 NC4 All electric Year 2005 Clamping unit Clamping force 150 ton Opening stroke 850 mm Distance between tie bars 520 X 520 mm Mould height min. 275 mm Injection unit Screw diameter 30 mm Injection volume 64 cm³ Shot weight 58 g Injection pressure 2500 bar Measurements and weight Dimensions 5,35 X 1,48 X 2,28 m Machine weight 6400 kg

Producer DEMAG Type 150 /500-610 NC 4 System Year 2005 Clamping unit Clamping force 150 ton Opening stroke 450 mm Distance between tie bars 560 x 460 mm Mould height min. 230 mm Mould height max. 460 mm Platen size (h x v) 690 x 660 mm Injection unit Screw diameter 45 mm Injection volume 323 cm³ Shot weight 29ß g Injection pressure 1973 bar Measurements and weight Dimensions 4,95 x 1,50 x 2,3 m Machine weight 7500 kg Robot Producer Witmann Type W621 Year 2004

Injection unit Screw diameter: 35 mm Closing unit Closing force : 1000 kN Distance between tie-bars: 520 x 520 mm Other Equipment : FULL ELECTRIC machine NC5 control Commissioning : 2010 Tonnage : 100

Ref. no.: 18367 Hersteller: DEMAG Year of construction: 2000 Clamping unit Clamping force: 500 ton Opening stroke: 810 mm Distance between tie bars: 900 x800 mm Mould height min.: 400 mm Mould height max.: 880 mm Platen size (h x v): 1300 x 1200 mm Injection unit Screw diameter: 95 mm Injection volume: 2835 cm³ Shot weight: 2550 g Injection pressure: 1832 bar Measurements and weight Dimensions: 8,7 x 2,4 x 2,3 m Machine weight: 24000 kg Robot Producer: Witmann Type: W631 Year: 2001

Hydraulic pressure: 210bar, weight: 3.1t.

Screw diameter: 95mm, distance between the bars: 900x800mm, max. opening path: 810mm, max. tool weight: 6.7t, operational pressure: 190bar, weight: 24t, with Industrial Robot FANUC M-16iL.

Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.

Injection unit Screw diameter: 35 mm Calculated injection volume: 154 cm3 Length/diameter ratio: 20 L/D Max. injection rate: cm3/s Material pressure: 2790 bar Closing unit Closing force : 1300 kN Distance between tie-bars: 520 x 520 mm Platen dimensions: 725 x 725 mm General Total installed power: 9.4 kW Other Equipment : Process INTELECT 2 FULL ELECTRIC 2 Hydraulic cores 1 AIR core EUROMAP 67 Commissioning: 2019 Hours: 3300 h Tonnage: 130

Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1300 x 1200 Clearance between columns (hxv) [mm] 900x800 Min./max. mold height [mm] 400-880 Maximum opening width [mm] 1690 Injection unit Screw diameter [mm] 80 Injection volume [cm3] 1779 Injection weight [g] 1619 Injection pressure [bar] 1855 Electrical and hydraulic equipment Rated power of the pump motor [kW] 86 Heater power [kW] 30.6 Dimensions and weight Net weight with control cabinet [t] 23.34 Dimensions (length x width x height) [m] 8.7 x 2.4 x 2.5

Friction wheel, impeller, bridge crane, indoor crane, assembly crane, workstation crane -Friction wheel drive for: Demag crane -with: pantograph -with: control switch -Dimensions: 660/330/H340 mm -Weight: 41 kg

Friction wheel, impeller, bridge crane, indoor crane, assembly crane, workstation crane -Friction wheel drive for: Demag crane -Impeller diameter: 270 mm -Impeller width: 90 mm -Number: 2x bikes available -Price: per piece -Dimensions: 390/120/H290 mm -Weight: 38 kg/piece

Indoor crane, crane, electric cable hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley -Manufacturer: Demag, crane chassis with electric cable pull without remote control -Crane chassis: engine KBH125 B 2/12 3.60/0.53 kW -Cable: 4M DH 410 H12 -Load capacity: 2000 kg -Main stroke: 10.0 m/min -Fine stroke: 1.6 m/min -Hook path: 12.0 m -Dimensions: 1340/1300/H500 mm -Town weight: approx. 390 kg

DEMAG OVERHEAD CRANE 40ton x 34 M SPAN + 5.2 ,M CANTILEVER MHE-DEMAG DOUBLE GIRDER GANTRY CRANE TYPE ZVPW YEAR 2011

OVERHEAD CRANE DEMAG 40 TON. X 18.6 M SPAN + 6.35 M CANTILEVER MHE - DEMAG DOUBLE GIRDER GANTRY CRANE, TYPE ZVPW, YEAR 2015.

Key data: 250 kN

Demag Ergotech Compact 250-80 Year of construction: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 280x280 mm Size of clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in � ...

Demag hose pouring machine type: Ergotech per 80-400 controls: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 80 cross-beam measures mm: 400 installation height min / max. mm: 250 record sizes: 580 x 580 hose unity snail diameter mm: 40 hose weights gr: 205 hose volumes cm?: 217 mass and weights dimensions LxBxH m: 4.13 x 1.13 x 1.81 machine weights kg: 3800 other 1x nuclear train, new cylinder with snail

CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,

Demag hose pouring machine type: Ergotech 330-840 systems control: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 330 cross-beam measures mm: 815 x 735 installation height min / max. mm: 330830 record sizes: 1040 x 950 hose unity snail diameter mm: 60 hose weights gr: 560 hose volumes cm?: 636 hose pressure cash: 1351 mass and weights dimensions LxBxH m: 6.5 x 1.9 x 2.2 machine weights kg: 14500