We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Lifting capacity: 20000 kg Hoist height: 0 mm Span length: 24500 mm Type: Overhead crane DEMAG Demag Overheadcrane 24500 x 20 ton MACH - ID 6331 Make: DEMAG YOP: 1997 Span24.500 mm Capacity Kg20.000 kg
used
Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg
used
DEMAG JC-P 1600 KG pillar jib crane manufactured in 2016 is used in supporting unloading and assembly work, as well as for machine operation in areas with limited space requirements. The compact design with increased stability is equipped with an rotating mechanism controlled by an electric inverter and a highly built-in jib, allowing for particularly high hook heights. All of this makes the DEMAG JC-P 1.6 T pillar crane ensure fast work and high safety in handling workpieces with a maximum weight of 1600 kg. Technical data of DEMAG JC-P 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 5000 mm
used
Compressor system composed of: Screw compressors Manufacturer: MANNESMANN DEMAG Type: 085 Rally Year of construction: 1992 Capacity: 7.9 m³ /min 3,000 min-1 45 kW Digital Screw compressors Manufacturer: MANNESMANN DEMAG Type: 085 Rally Year of construction: 1992 Capacity: 7.9 m³ /min Pressure: 75 bar 3,000 min-1 45 kW Compressed Air Refrigerant Dryer Manufacturer: MANNESMANN DEMAG Type: AD160AB Year of construction: 1993 Oil-water separator Type: ÖWAMAT 6 Compressed air tanks Manufacturer: LOHENNER Type: ZU47/21 Volume: 5,000 l Standing version Year of construction: 1993 Overpressure 11 bar
used
Electric hoist, crane, electric wire rope hoist, cable winch DEMAG type P 10 Fabr. No. 941 477 Year of manufacture 1962 Load capacity 2000 kg with 4 strings Lifting height 5 meters Hoisting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 volts, 50 Hz - Hoist DEMAG, type 19/11 K28P - Electric chassis DEMAG, type 13 / 6 K8 - 1 travel speed approx. 19 m/min - Chassis for double T-beams, beam width 120 to 180 mm - Load hook for 4 load trains - Control bottle for the hoist with approx. 2.5 meters cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg good condition; used
used
1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min
used
1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min
used
1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min
used
1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
1 factory-tested double girder overhead travelling crane Payload 10.000 kg Wingspan currently and possible about 11,500 mm Hook path Max approx. 8,000 mm Make ABUS/Demag Workshop examination 2016 with separate DEMAG two-rail wind plant trolley & single-sided catwalk Working speeds: Hoist 2-tier Trolley gear 2-speed Crane chassis 2-speed
used
Key data: 31 , 2800
DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: M7odp Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 Speedometer ATTENTION But the connector (Tacho - motor) is missing Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 2 pieces are available The motors are all in a comparable state - the attached images are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8160
used
Key data: 31 , 2800
DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 speedometer Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 6 pieces are available The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8159
used
DEMAG OVERHEAD CRANE 40ton x 34 M SPAN + 5.2 ,M CANTILEVER MHE-DEMAG DOUBLE GIRDER GANTRY CRANE TYPE ZVPW YEAR 2011
used
OVERHEAD CRANE DEMAG 40 TON. X 18.6 M SPAN + 6.35 M CANTILEVER MHE - DEMAG DOUBLE GIRDER GANTRY CRANE, TYPE ZVPW, YEAR 2015.
used
Other Info: Demag Single Beam MACH-id 4451 MAKE DEMAG VAN DEN BERG TYPE ELK YEAR 2006 SPECIFICATIONS Span 9330 mm Height of lift 10.000 mm SWL / Kg 10000 kg DIMENSIONS Length 11000 mm Width 2492 mm Height 1615 mm
used
Lifting capacity: 10000 kg Hoist height: 12000 mm Span length: 23600 mm Type: Overheadcrane MACH-id 3133 MAKE Demag TYPE ZLK YEAR 2010 SPECIFICATIONS Span 23.600 mm Height of lift 12.000 mm SWL / Kg 10.000 kg demag overhead crane
used
Sumitomo Demag injection molding Systec Wittmann Robot Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021
used
Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5697825Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric chain hoist make DEMAG type PK 2 NFFabr. -No: 1523998 Year of construction 1987Capacity: 500 kgLifting height: 3.0 mLifting speed: 5.0 mFine lifting speed: 1.25 mMotor power: 0.5 / 0.13 kWWith- fine lift- 2-stranded- Electric lifting magnet Mannesmann / Demag R27 / 220xa0xa0 -No: 128122, rated current 0.75 A, Drm. Magnet 250 mm- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5546885Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Demag Plastifiziereinheit SC Zylinder Ø50 zu Demag Ergotech - IU 1450 - Ø 50mm - Hubvolumen: 530 cm³ - Einspritzdruck: - Spritzteilgewicht - Schnecke: Einzug: 49,50mm Ausstoß: 49,30mm RSP: 49,93mm - Zylinder: Einzug: 50,00mm Ausstoß: 50,00mm - Voll funktionsfähig - Aus laufender Maschine ausgebaut
used
E-chain hoist, electric hoist, crane DEMAG type DKUN5-500-K-V1F4 Fabr. SKU: 61077868 Year of construction: 1999 Payload 1000 kg Hook travel 6.5 meters Hood lifting speed 10 m/min. Fine lifting speed 1.6 m/min. 2 load trains = 1000 kg mains connection 400 volts, 50 Hz. - Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, carrier width 120 to 280 mm - 2 travel speeds 4.6 m/min and 14 m/min - Cable length of the operating bottle 4.5 meters Weight 130 kg good condition; used
used
Column-mounted slewing jib crane DEMAG type KBK 100 Year of construction approx. 2008 Load capacity 80 kg Swivel range 270 Projection 2500 mm Construction height 1980 mm Height to lower edge Boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile sill KBK 1 - Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm ) - yellow lacquered Net weight approx. 100 kg good condition; used
used
Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes
used
clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...
used
clamping force: 4200 kN injection volume: 1212 /292 cm³ screw diameter: 70 /15 mm platen size: 1200 x 1100 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic i ...
used
Demag Ergotech 160/520-600 Santosh and Demag Ergotech 120-320 System Injection Moulding Machine Prefer to sell both together Price for both machines
used
Demag Compressor 080IIH Pressure generator from 1986, complete (closed module) 1 available 505 m3/h, 6 bar. Manufacturer: Mannesmann Demag Model No.: 080IIH Type: piston compressor Serial Number: 920 501 / 78 Capacity flow rate [m3/h]: 505 Pressure outlet [bar]: 6 Power [kW]: 45,5 Year of construction: 1986 Running hours [h]: – Weight [kg]: 1.978 Dimensions LxWxH [cm]: 246x122x143
used
Crane motor, travel drive Crane bridge drive with gearbox Sliding anchor motor, Schuer motor, three-phase electric motor, brake motor, crane motor, wire rope hoist drive, crane drive, hoist motor, fine lift motor Manufacturer: DEMAG Motor Type: 24/10 KF8-2 Motor No.: 982869 Motor Design: B5 Nominal voltage: 380 VAC Nominal frequency: 50 Hz Power level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm. with gearbox DEMAG type KS 12 reduction gearbox Fabr. No. 1909104 Gear ratio: i = 118 with impeller for crane track 2 pieces available, price indication per piece; used
used
Screw compressor, air compressor, compressed air unit, stationary air compressor -Manufacturer: Mannesmann Demag, screw block from compressor type SP-041 -Screw block: Type EK 103NK -Intake unit: Demag type 10483974 with filter -Dimensions: 580/510/H480 mm -Weight: 65 kg
used
Producer DEMAG Type Demag IntElect 150/520-310 NC4 All electric Year 2005 Clamping unit Clamping force 150 ton Opening stroke 850 mm Distance between tie bars 520 X 520 mm Mould height min. 275 mm Injection unit Screw diameter 30 mm Injection volume 64 cm³ Shot weight 58 g Injection pressure 2500 bar Measurements and weight Dimensions 5,35 X 1,48 X 2,28 m Machine weight 6400 kg
used
This used DEMAG Ergotech System 1500-440/120 injection moulding machine was manufactured in 1999, equipped with handling features for enhanced productivity and ease of use. As an injection moulding machine, it offers reliable performance and precision in moulding operations, making it a valuable asset for production lines requiring high-quality plastic components. The opportunity to buy this DEMAG Ergotech System 1500-440/120 injection moulding machine represents a strategic investment for businesses looking to upgrade or expand their manufacturing capabilities. For more details, please contact us.
used
This used injection moulding machine manufactured in 2001 by DEMAG, model D125-320h/120v, comes with handling features, designed to optimize production efficiency and reliability. A robust example of engineering excellence, this machine stands out for its precise performance and durability. The technical specifications highlight its adaptability to various production requirements, making the DEMAG D125-320h/120v machine we have for sale a valuable asset for any production line seeking quality and consistency. For further details, please contact us.
used
This injection moulding machine was manufactured in 1999. The DEMAG D110-310H/120V stands out for its robust design and reliable performance over the years. Known for its efficiency in production environments, this model has been a staple for businesses seeking to enhance their manufacturing capabilities. This DEMAG machine we have for sale represents an opportunity to acquire proven machinery with a track record of success. For further details, please contact us to discuss how this machine can meet your needs.
used
This injection moulding machine, manufactured in 2000 by DEMAG, model Ergo-Tech 350 Concept, comes with handling technical specifications, making it a prime choice for efficient and reliable production. Its design emphasizes durability and ease of use, suitable for a wide range of injection moulding applications. The DEMAG Ergo-Tech 350 Concept machine we have for sale represents an opportunity to enhance your manufacturing capabilities with a proven, quality piece of equipment. For further information, please contact us.
used
This DEMAG Ergo-Tech 110-310H-120V injection moulding machine was manufactured in 2002, offering precision and reliability for various production needs. Its notable for its efficiency and ease of use, designed to streamline manufacturing processes. This DEMAG machine we have for sale represents a solid addition to any production line, enhancing output with its proven performance. Contact us for further details.
used
Key data: 500 kN
Demag Ergotech Compact 500-120 / machine in very good technical condition Year of construction: 1993 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Spray pressure: 2000 bar Dosing volume: 61.3 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 1 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 5.1 kW Total power: 20.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live ...
used
This DEMAG Ergotech 150-610 Compact Injection Moulding Machine was built in the year 1998 and has 13860 pump hours. It is equipped with a Demag NC IV control unit. The machine has a clamping force of 1650 kN and a screw diameter of 40 mm.
used
CONTROLS PLC SIEMENS FEEDSTOCK STEEL STRIP sheet width max.: 450 mm sheet width min.: 90 mm sheet thickness max.: 13 mm sheet thickness min.: 2 mm exterior coil diameter max.: 1900 mm exterior coil diameter min.: 1100 mm internal coil diameter max.: 760 mm internal coil diameter min.: 610 mm PRODUCT (PROFILE, TUBE) external diameter min.: 30 mm external diameter max.: 140 mm wall thickness min.: 2 mm wall thickness max.: 12 mm length min.: 4000 mm lenght max.: 10000 mm LINE CHARACTERISTICS Forming Process: rollforming welding process: HF inductive sawing process: travelling speed max.: 65 m/min feedstock transport direction: left to right Line consis ...
used
Demag hose pouring machine type: Ergotech per 80-400 controls: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 80 cross-beam measures mm: 400 installation height min / max. mm: 250 record sizes: 580 x 580 hose unity snail diameter mm: 40 hose weights gr: 205 hose volumes cm?: 217 mass and weights dimensions LxBxH m: 4.13 x 1.13 x 1.81 machine weights kg: 3800 other 1x nuclear train, new cylinder with snail
used
Demag hose pouring machine type: Ergotech 330-840 systems control: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 330 cross-beam measures mm: 815 x 735 installation height min / max. mm: 330830 record sizes: 1040 x 950 hose unity snail diameter mm: 60 hose weights gr: 560 hose volumes cm?: 636 hose pressure cash: 1351 mass and weights dimensions LxBxH m: 6.5 x 1.9 x 2.2 machine weights kg: 14500
used
Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...
used
Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.
Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.
used
1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min
used
Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...
used
Mannesmann Demag compressor General repair 2004 Flow rate: 39.5 M ³/min, 2150 m ³/h Suction pressure: 1 bar Max pressure: 10 bar Speed: 1500 rpm Engine power: 250kW Pressure: 8.5 bar