demag 2 5t used for sale

: 125 kg width:: 4 m length: 6,5 m : 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CLAMPING FORCE: 50TON PLATEN SIZES: 540 X 540MM D.B.T.B: 355 X 355MM MIN MOULD HEIGHT: 210MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 610MM SCREW DIAMETER: 35MM INJECTION PRESSURE: 1890BAR STROKE VOLUME: 144CM3 SHOT WEIGHT (P/S): 128GR CONTROLS: NC4 MOTOR: 11KW HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC CORE PULLING: 1 AIR VALVES: 1

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Nominal load: 750 kg -Lifting speed: 9.5 m/min -Lifting height: 9.5 m -without service -Dimensions: 730/420/H340 mm -Weight: 160 kg

Offer 23357 THE CRANE CAN BE VIEWED AT THE D-03042 COTTBUS SITE BY APPOINTMENT. Technical data approx.: - Load capacity 2000 kg - Track gauge approx. 6.5 m - Operation via handheld remote probe - Hackenweg up to approx. 5000 mm - Reeving 4 / 1 - Vertical clearance approx. 600 mm - Wheelbase approx. 2000 mm - Driving beam length approx. 2360 mm - Speeds approx. - Cat chassis approx. 20 5 m/min - Hoist approx. 4 + 1.0 m/min - Crane chassis approx. 6.3 + 25 m/min - Total weight – crane approx. 1500 kg - without pictured chain hanger

Fully functional machine in good condition. Screw diameter 45,0 mm Tie bar spacing (H) 500,0 mm Tie bar spacing (V) 500,0 mm Shot weight 291,0 g Pressure on material 1910,0 bar

Distance between column : 460 mm x 460 mm Minimum mold clamping 220 mm max 550mm. 125 Ton Machine is in good condition

Manufacturer: Germany Year of release: 2005 Clamping force: 1000 t Raw material injection volume: 4372cm3 Built-in mold height max: 1200 mm Built-in mold height min: 500 mm Auger diameter: 95 mm Working equipment, serviced.

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 530 cm³ Pressure on the material: 2426 bars LOSING UNIT Closing force: 3300 kN Opening stroke: 675 mm Mold thickness Mini / Max: 330/710 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 358 cm³ Pressure on the material: 2400 bars CLOSING UNIT Mold thickness Mini / Max: 330/710 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm EQUIPMENT - Electric motor on injection

Closing force: 100 T Opening stroke: 500 mm Between columns: 420 x 420 mm Tray dimensions: 600 mm X 600 mm Mini/maxi mould: 250 mm Max gap between trays: 750 mm

Screw diameter: 35 mm Screw length: 20D cm3: 168 Bars: 2640 Between columns: 470 x 470 mm Tray dimensions: 670 mm Mini/maxi mould: 250 mm Max gap between trays: 580 mm Motor power: 22 kW Heating power: 11 kw

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ CLOSING UNIT Closing force: 1100 kN Passage between columns: 470 x 470 mm

Injection unit Screw diameter: 35 mm Closing unit Closing force : 1000 kN Distance between tie-bars: 520 x 520 mm Other Equipment : FULL ELECTRIC machine NC5 control Commissioning : 2010 Tonnage : 100

Injection unit Screw diameter: 35 mm Calculated injection volume: 168 cm3 Material pressure: 2000 bar Closing unit Closing force : 1000 kN Min. mold thickness: 320 mm Other Commissioning: 2006 Tonnage: 100

Closing force: 35t, max. shot weight: 47g, opening stroke: 530mm, installation height: 180-350mm, distance between the bars: 280x280mm, weight: 1.8t.

Hydraulic pressure: 210bar, weight: 3.7t.

Closing force: 110t, max. shot weight: 280g, opening stroke: 850mm, installation height: 250-695mm, distance between the bars: 450x450mm, weight: 6.1t, with Handling Wittmann W621-480-NC4.

Screw diameter: 95mm, distance between the bars: 900x800mm, max. opening path: 810mm, max. tool weight: 6.7t, operational pressure: 190bar, weight: 24t, with Industrial Robot FANUC M-16iL.

Operational pressure: 210bar, weight: 4t, with documentation, without accessories.

Screw diameter: 35mm, operating hours: 73,500h, on-site inspection is possible.

Discharge pressure: 8bar, suction pressure: 1000mbar, volume flow: 337m³/h, rotational speed: 1475/min, shaft power: 36kW, motor power: 37kW, operational hours counter: 25,438h, with documentation.

Volume flow: 13.3m³/min, rotational speed: 1500/min, connected load: 90kW.

Volume flow: 18.9m³/min, rotational speed: 3000/min, connected load: 132kW.

There are three identical gearboxes available, one has been completely overhauled, the other two were in use until the end and are also in working order, an on-site inspection is possible.

Description magnetic planes

screw size: mm injection shot weight in Polysterol: g/PS closing pressure: kN

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:1250 kN

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:1250 kN

arm length: 8000 mm total column height: 4000 mm weight max. in kg: 3000 kg height: 4300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m K9F 0902 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CLAMPING FORCE: 250TON PLATEN SIZES: 930 X 930MM D.B.T.B: 630 X 630MM MIN MOULD HEIGHT: 330MM MOULD OPENING STROKE: 670MM MAX DAYLIGHT: 1380MM EJECTOR STROKE: 200MM SCREW DIAMETER: 50MM INJECTION PRESSURE: 3032BAR STROKE VOLUME: 530CM3 SHOT WEIGHT (P/S): 482GR CONTROLS: NC5 SCREW DRIVE: ELECTRIC AIR CIRCUIT: 4

Overhead crane, indoor crane, assembly crane, workplace crane -with 2x electric cable pulls -Load capacity: 2x 1600 kg -Bridge load capacity: 3.2 tons - Wingspan: 6.4m -hall service -Dimensions: 2000/6400/H1000 mm -Weight: about 2000 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 100 bar -Liter output: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Screw compressor, air compressor, compressed air unit, stationary air compressor -Delivery quantity: 35.1 m³/min -Motor power: 200 kW -Construction encapsulated -with oil/water heat exchanger -Max. Pressure: 8 bars -Operating hours: 61,107 h -Year of construction: 1990 -Electric motor type: TN5317M-BZ014-Z -Power: 200kW -Speed: 1480 rpm -Shaft: Ø mm -Construction: B3/5 -Protection class: IP23 -Dimensions: 3100/1900/H2250 mm

Hand trolley, rolling trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley, carrier trolley, monorail trolley -Crane chassis: beam width: up to 175 mm -Load capacity: 1000 kg -Dimensions: see technical. Drawing in the photos -Quantity: 8x chassis available -Price per piece -Dimensions: 245/200/H190 mm -Weight: 7.6 kg/pc.

Manipulator, lifting aid, lifting device, workplace crane, hall slewing crane, hall crane, workplace crane, material grab, column slewing crane -Manufacturer: dalmec, manipulator pneumatic Posivel type PVC -Load capacity: 80 kg -Throat: max. 3040 mm -Total height: 3015 mm -Hook height: 1800 mm -Stroke: 3300mm -Swivel range: 270° -Dimensions: see photo technical. drawing -Transport dimensions: 3050/700/H500 mm -Town weight: 192 kg

Crane magnet, lifting magnet, load lifting magnet, load lifting magnet, round magnet, scrap lifting magnet, scrap magnet -Construction: electro magnet -max lifting capacity: 2200 kg -Dimensions: 250/340/H460 mm -Own weight: 1114 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Transfer in current condition as seen -Operation is missing a switching element (can be installed at an additional cost) -Motors tested: and ok -Rated load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 705 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Price: per piece -Number: 5x available -Dimensions: 290/170/H205 mm -Weight: 13 kg

Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg

Gear motor, electric motor -Speed: 80 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 450/270/H175 mm -Weight: 20 kg

Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Gear motor electric motor -Speed: 197 rpm -Power: 0.55 kW -Construction: hollow shaft angle B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 460/230/H170 mm -Weight: 20 kg

Electric motor, three-phase motor -Handover: in the current condition as seen -Brake: dismantled -Power: 1.8KW -Speed: 1375 rpm -Shaft: Ø 24 mm -Type: B5 -Protection class: IP 54 -Dimensions 360/200/H250 mm -Weight 19.5kg