demag 2 5t used for sale

Ref. no.: 17516 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 100 ton Opening stroke: 500 mm Distance between tie bars: 420 x 420 mm Mould height min.: 250 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 25 mm Injection volume: 61 cm³ Shot weight: 54 g Injection pressure: 2752 bar Measurements and weight Dimensions: 4,2 x 1,4 x 2,0 m Machine weight: 4200 kg Additional information & extras Core pull: 1 pcs

Offer 24042 Specifications: - Hoist DEMAG PK 2 N F, load capacity 250 kg - Load capacity gantry 250 kg - Hook height approx. 2850 mm - 2 lifting speeds 10.0 + 2.5 m/min - Manual trolley chassis - Passage between the driving stands approx. 3350 mm - Passage height lower edge of portal girders approx. 3220 mm - Driving beam approx. 1130 mm - 4 swivel castors - Total width approx. 4050 mm - Total depth approx. 1150 mm - Total height approx. 3420 mm - Drive 400 V - Total weight – crane + hoist approx. 250 kg

Machine: DEMAG 200T BI MAT 610H / 120 BI MAT Year: 2000 Control type: NC4 Number of hours: 31 500H Closing Closing force: 200T Opening stroke: 500 mm Between columns: 610 x 610 mm Tray dimensions: 830 X 830 mm Mini / maxi mold: 310/660 mm Max distance between plates: 1235 mm Injection: Screw diameter: 45/25 mm Screw length: 20 D cm3: 322/61 Bars: 1900/2006 General: Motor power: 30KW Heating power: 13KW Closing weight: 10T1 Dimensions length: 5M70 Dimensions width: 1M70 Dimensions height: 2M10 Options: Cores: 2 Robot interface: YES Bi metal: YES Others: turntable, 2 blow guns

Demag Concept 300-630/2300 injection molding machine Year of production - 2006 Clamping force - 3000 kN Spacing between columns - 950 X 950 mm Table size - 630 x 630 mm screw diameter - 80 mm injection volume 1583 cc injection weight - 1430 g injection pressure - 1437 bar machine weight - 14,600 kg dimensions of the machine 6.5 x 1.9 x x 2.3 m number of man-hours worked 75299 Screw 80 mm hardened (good condition) RSP revised in 2022 2021 injection system has been completely sealed 2019 the pump along with the control valve and Hall sensor has been completely revised

Demag Ergotech 2000-840 Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 830 x 830 Clearance between columns (hxv) [mm] 560 x 560 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 636 Shot weight [g] 570 Injection pressure [bar] 1351 Dimensions and weight (approximately) Net weight with control cabinet [t] 10 Dimensions (L x W x H) [m] 5.70x1.70x2.10

Brand DEMAG Type ERGOtech system 1000-200 year of manufacture 1998 Clamping unit clamping force 100 ton opening stroke 500 mm beam dimension (h x v) 420 x 420 mm Installation height min. 250 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 25 mm Injection volume 61 cm³ Injection weight PS 54 gr Injection pressure 2752 bar Dimensions and weights Dimensions LxWxH 4,2 x 1,4 x 2,0 m Machine weight 4200 Kg Additional information & extras Core pull 1 pc.

Producer DEMAG Type Ergotech pro 50-270 Year 1997 Clamping unit Clamping force 50 ton Opening stroke 400 mm Distance between tie bars 355 x 355 mm Mould height min. 210 mm Platen size (h x v) 540 x 540 mm Injection unit Screw diameter 35 mm Injection volume 106 cm³ Shot weight 95 g Injection pressure 2573 bar Measurements and weight Dimensions 3,65 x 1,15 x 1,18 m Machine weight 3600-2500 kg

Producer DEMAG Type 60/420-200 NC5 Year 2006 Clamping unit Clamping force 60 ton Opening stroke 600 mm Distance between tie bars 420 x 420 mm Mould height min. 200 mm Opening width 750 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 25 mm Injection volume 61 cm³ Shot weight 54 g Injection pressure 2752 bar Measurements and weight Dimensions 4,1 x 1,4 x 4,2 m Machine weight 3950 kg The machine received a new cylinder and a new screw in December 2022

Inv. Num. : 7418 Type: Concept 420/810-2300 Producer: Demag Created: 2006 Parameters: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection mass: 800 g Height of the clamping plate: 1200 mm Width of clamping plate: 1100 mm Distance between uprights (horizontal): 800 mm Distance between uprights (vertical): 710 mm Maximum spraying pressure: 2420 bar Machine length: 7900 mm Machine width: 2200 mm Machine height: 2500 mm Injection weight: 20000 kg

Ref. no.: 18383 Hersteller: DEMAG Year of construction: 2008 Clamping unit Clamping force: 420 ton Opening stroke: 770 mm Distance between tie bars: 820 X 820 mm Mould height min.: 380 mm Mould height max.: 825 mm Platen size (h x v): 1200 X 1100 mm Injection unit Screw diameter: 60 mm Injection volume: 890 cm³ Shot weight: 810 g Injection pressure: 2420 bar Measurements and weight Dimensions: 8,2 X 2,2 X 2,4 m Machine weight: 22300 kg Additional information & extras Core pull: 4 pcs Robot Producer: Remak Year: 2008

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.

This DEMAG ERGOTECH 4200-2300 Injection Moulding Machine was built in the year 1995 and has 25000 production hours. It is equipped with a Wittmann handling. The machine has a clamping force of 4200 kN and a screw diameter of 70 mm. It comes with 2 core pullers.

Key data: 4200 kN

Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement  ...

Key data: 800 kN

Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to  ...

Molding machine of Mag Type: Ergotech 50-200 Control Panel: NC 4 year of construction: 1993 Clamping unit Clamping force t 50 Gap mm: 400 Holm dimension mm: 320 x 320 min/max height mm: 210 Plate size: 530 x 540 Injection unit Screw diameter mm: Gr 25 injection weight: 54 Injection volume cm m³: 61.3 Spray pressure bar: 2740 Dimensions and weights Dimensions Lxwxh m: 3.7 X 1.4 X 1.7 machine weight kg: 3250 Miscellaneous HEATING CHANNEL CONTROL 4 COMPARTMENT

Injection molding machine Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t: 250 gap mm: 675 Holm dimension mm: 560 x 560 min/max height mm: 310 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm m³: 1039 Spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2 machine weight kg: 11.200 Miscellaneous Two pump system EUROMAP 12 2 core pull

Injection molding machine Type: Ergotech 330-2300 system control: NC 4 year of construction: 1998 Clamping unit Clamping force t 330 Gap mm: 675 Holm dimension mm: 710 x 630 min/max height mm: 330 / 830 Plate size: 1040 x 950 injection unit Screw diameter mm: Gr 80 injection weight: 1430 Injection volume cm m³: 1583 Spray pressure bar: 1437 Dimensions and weights Dimensions Lxwxh m: 6.5 x 2 x 2.1 machine weight kg: 16,000 Miscellaneous Two pump system EUROMAP 12 2 core pull

Molding machine of Mag Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t Gap between 250 mm: 575 Holm dimension mm: 560 x 560 min/max height mm: 660 / 760 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm 3: 1039 spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2.2 machine weight kg: 11200 Miscellaneous 2 core EUROMAP 12

Wall swivel crane Payload 250 kg Lifting height 5,000 mm Extension 6,500 mm Hallway control Electricallifting/Lowering Lifting speed 10 /2.5 m/min. Connection 380 Volt

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...

Production year: 2004 Control: NC4 Injection unit: .../200 Screw diameter: 25 mm Specific injection pressure: 2400 bar Injection volume: 61 cc Injection weight: 54 g Tool closure system: .../500 Clamping force: 50 t Tool plate dimensions: 520 x 520 mm Distance between columns: 355 x 355 mm Tool height: 210 mm Opening distance: 400 mm Max.Distance plates: 610 mm General data: Pick-up date: Immediate Dimensions (m) LxWxH: 3.7 m x 1.4 m x 1.8 m Weight: 2900 kg

INJECTION UNIT Length / diameter ratio: 20 L / D CLOSING UNIT Closing force: 2000 kN GENERAL Heat output: 37 kW Total installed power: 52 kW Quantity of oil: 650 l. Dimension: (WxHxD) 5.7 x 2.1 x 1.7 m. Weight: 10000 Kg

Type of control: NC 4 Closing force: 250 T Opening stroke: 675 mm Between columns: 630 x 630 mm Tray dimensions: 950 X 950 mm Mini/maxi mould: 330/710mm Max gap between trays: 1385 mm Screw diameter: 60mm Screw length: 20D

Closing force: 280 T Opening stroke: 675 mm Between columns: 630 X 630 mm Tray dimensions: 950 x 950 mm Mini/maxi mould: 330/710 mm Max gap between trays: 1385 mm Motor power: 26 kW Heating power: 23.1 kw Type of control: NC 4

Screw diameter: 50 mm Calculated injection volume: 530 cm³ Length/diameter ratio: 20 L/D

Description Rotating Table Diameter: 1000 Table positions: 2 Hot channels: 8

screw size: mm injection shot weight in Polysterol: g/PS closing pressure:1100 kN

Hydraulic pressure: 210bar, weight: 3.1t.

Clamping force: 420t, screw diameter: 70/ 15mm, injection volume: 1212/ 292cm³, length: 7900mm, width: 2200mm, height: 5000mm, weight: 25t, with robot.

Closing force: 50t, max. shot weight: 95g, opening stroke: 610mm, installation height: 210-400mm, distance between the bars: 350x350mm, weight: 2.5t.

Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible.

Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.

Max. load: 1t, max. arm length: 3000mm, column diameter: 410mm, height: 3760mm, lifting speed: 16m/min, need a 1x1x1m³ foundation, an on-site inspection is possible.

Control type: NC4 Closing force: 200T Opening stroke: 500 mm Between columns: 610 x 610 mm Tray dimensions: 830 X 830 mm Mini / maxi mold: 310/660 mm Max distance between plates: 1235 mm Screw diameter: 45/25 mm Screw length: 20 D cm3: 322/61 Bars: 1900/2006 Motor power: 30KW Heating power: 13KW Closing weight: 10T1 Cores: 2 Robot interface Bi metal Others: turntable, 2 blow guns

B&A REF: 9004 TON: 200 SHOT WEIGHT: 570G SCREW DIAMETER: 60MM STROKE VOLUME: 636CM3 INJECTION PRESSURE: 1351AR PLATEN SIZES: 830 X 830MM DBTB: 560 X 560MM MIN MOULD HEIGHT: 310MM MAX MOULD HEIGHT: 660MM MOULD OPENING STROKE: 575MM MAX DAYLIGHT: 1235MM EJECTOR STROKE: 180MM CONTROLS: NC4 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC

INJECTION UNIT Screw diameter: 22 mm Calculated injection volume: 42 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 1830 bars CLOSING UNIT Closing force: 250 kN Opening stroke: 315 mm Mold thickness Mini / Max: 160 mm Max distance between tray: 475 mm Passage between columns: 280 x 280 mm Tray size: 410 x 410 mm GENERAL Quantity of oil: 120 l. Dimension: (WxHxD) 2.90 x 1.65 x 1.03 m. Weight: 1550 Kg

Type of control: NC4 Closing force: 420T Opening stroke: 710 mm Between columns: 870 x 710 mm Tray dimensions: 1200 x 1100 mm Mini/maxi mould: 380/820 mm Max gap between trays: 1530 mm Injection: Screw diameter: 70 mm Screw length: 20D cm3: 1212 Bars: 1877 General: Motor power: 45 kW Heating power: 31 kw Closing weight: 18T Options: Cores: 2 Robot interface: yes Bi metal: yes Others: wittmann robot

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: L / D Pressure on the material: 1905 bars CLOSING UNIT Closing force: 2500 kN Mold thickness Mini / Max: 370-710 mm Passage between columns: 630 x 630 mm EQUIPMENT 4 Cores EUROMAP robot socket

Year of manufacture: 2004 Type of control: NC4 Number of hours: 27,000 H Closing force: 200T Opening stroke: 575 mm Distance between columns: 560 x 560 mm Tray dimensions: 830 X 830 mm Mini/maxi mould: 310/660 mm Max gap between trays: 1235 mm Screw diameter: 50/25 mm Screw length: 20 D Injection volume: 442/61 cm3 Injection pressure: 1946/1940 bar Motor power: 30KW Heating power: 14.8 KW Closing weight: 10T Dimensions length: 5.70 m Dimensions width: 1.70 m Dimensions height: 2.10 m 1 hydraulic core robot interface Bi-metal Turntable

Control type: NC 5 Number of hours: 27,000 hours Closing Closing force: 350 T Opening stroke: 700 mm Between columns: 760 x 710 mm Tray dimensions: 1070 X 1015 mm Mini/maxi mold: 400/670mm Max distance between trays: 1370 mm Injection: Screw diameter: 60 mm Screw length: 20 D cm3: 2366 Bars: 890 General: Motor power: 55 kW Heating power: 23.1 kW Closing weight: 18 T Injection weight: Dimensions length: 6.5 m Width dimensions: 1.8 m Dimensions height: 2.3m Options: Cores: hydraulic predisposition 2 cores Robot interface: E67 Bi metal: YES Others: 4 blow guns, 2 Kisler mold pressure ports, laminar flow, 8 hot runners

Screw diameter [mm] 22 Injection volume [cm3] 22.8 Injection weight [g] 20 Injection pressure [bar] 2400 Electric-hydraulic equipment Nominal power of the pump motor [kW] 7.5 Heater power [kW] 3.7 Dimensions and weight Net weight with control cabinet [t] 2.6 Dimensions (L x W x H) [m] 3.20x1.30x1.80 m

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 830 x 830 Clearance between columns (hxv) [mm] 560 x 560 Min./max. mold height [mm] min 310 Maximum opening width [mm] 1335 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 451 Injection weight [g] 410 Injection pressure [bar] 1946 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 15 Dimensions and weight Net weight with control cabinet [t] 9 Dimensions (length x width x height) [m] 5.7 x 1.7 x 2.1

Clamping force: 35 t Year of construction: 2006 Injection weight in PS: 30 g Control Type: NC4 Injection unit: .../80 Screw diameter: 22 mm Spec. Injection pressure: 2061 bar Spray volume: 34.2 cc Injection weight in PS: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit: 350/... Clamping force:: 35 t Size of clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Aperture travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm General information: Delivery Time: Natychmiast Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment Filling funnel Sorting flap bimetallic plasticizing structure hydraulic core on movable plate

Key data: 250000 kN, 690 g/PS, 60 mm

Clamping force: 250 t Year of construction: 2008 Injection weight in HP: 690 (hp) g Control Type: NC4 Injection unit: .../1450 Screw diameter: 60 mm Spec. Spray pressure: 1905 bar Spray volume: 763 ccm Injection weight in HP: 690 (hp) g Clamping unit: 250/... Clamping force:: 250 t Size of clamping plates: 950 x 950 mm Lights spar spacing: 630 x 630 mm Tool installation height: 330...710 mm Aperture travel: 450 mm Max. plate spacing: 1160 mm General information: Delivery Time: Dostępna Fuel tank capacity OIL: 700 l

Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Screw diameter: 30 mm Specific injection pressure: 1990 bar Injection volume: 106 cm3 Shot weight: 94 g Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg Condition: working

Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650.5200 Model 2001 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot

Key data: 1100 kN

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...