demag 120 used for sale

Platform ladder GÜNZBURGER 50103 platform area: 800 x 600 mm platform height: 720 mm load max.: 150 kg used, tested ! Dimensions: 1200 x 780 x 1740 mm

Step drill with internal cooling GESAU diameter: Ø 14.5 x 23.5 / 120° x 25 x 110 ( Ø14.5x23.5/120°x25x110 ) shank: Ø 25 mm with internal cooling ! New ! Dimensions: 110 x 25 x 25 mm

Steam Boiler Plant 120 MW / 30 bar Saturated Steam This steam boiler plant is in good condition and designed to produce 54 kg/sec of saturated steam at 30 bar for industrial processes. The boiler features a membrane wall construction and is supported from the bottom. It is equipped with four burners located at the top of the boiler: two fired by natural gas and two by light fuel oil, each with a capacity of 30 MW. The firebox base and lower manifold are protected by refractory tiles. The flue gas side of the boiler operates under positive pressure. The plant includes two 100% capacity combustion air fans; there is no exhaust gas fan. The equipment has been meticulously maintained and upgraded throughout its operational life, meeting the most stringent modern quality standards. The steam boiler operates on natural water circulation, with heating surfaces arranged across two draughts ...

description: Limited opportunity! For sale are approx. 100 pcs. LED floodlights. Perfectly suitable for production halls / warehouses. The lamps were purchased approx. 2016 and have run approx. 35.000h since then. The manufacturer has stated that the lamps have run 80.000h, before the lighting effect can decrease. The new price was at that time after discount blow 400 / pc plus installation. The reason for the high price is also the advantage of a component system. Unlike many other systems, this one is replaceable / repairable LED/system power 120/135W; luminous flux 14.400 lumen; beam angle 120°; input voltage 100-240VAC 50/60Hz Information without guarantee Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and r ...

VIBRO CLASSIFIER FOR GRANULATES, 2 outlets, dimensions : 500 x 1.400 mm., screen holes 8 mm Ø, all parts in contact with water are in AISI304 stainless steel, wheeled supporting structure, complete with connecting plug, machine offered checked for good conditions, total dimensions : 1.900 x 850 x 1.000 kg.300

Lifting kneader KEMPER, type: F 75 ASL -overhauled- - for 75 kg flour or 120kg dough - incl. 2 tank cars - Incl. dust cover - Condition: technically very good, ready for immediate use -Refurbished - 6 months warranty Visits and test runs are possible by arrangement.

Intensive mixer with hydraulically fold-out tool bridge, usable filling per batch (max.): 75 l. / 120 kg, emptying via central bottom flap (hydraulically operated), tools: star agitator and wall-to-floor scraper. Agitator drive: 11.0 kW via V-belt, drum drive: 3.0 kW via friction wheel, hydraulic unit: 0.75 kW for lock operation and tool bridge. Including a modern control cabinet with Yaskawa frequency converters for agitator and drum drive.

HEAVY DUTY SINGLE SHAFT SHREDDER - multipurpose, Main applications:TYRES - CABLES - WEEE - LIGHT METAL SCRAPS - OIL FILTERS, and other industrial waste, Rotor length: 1,200 mm, Rotor diameter: approx. 500 mm, rotor speed 144 rpm, Cutting chamber opening: 600 x 1.200 mm, 30 rotating blades, 16 fixed blades, Installed power: 1 x 132 Kw IE3 (belt drive), Siemens (PLC and control equipment), Schneider Electric (protections, switches and power supply), Omron (sensors and auxiliary modules), Power supply voltage: 3~ 400 V – 50 Hz, screen holes bespoke to project, Robust structure with interchangeable internal armour plating in wear-resistant steel., High-inertia rotor designed to minimise wear and optimise cutting power., Blades can be resharpened several times, Quick blade and grid replacement system with easy access., Hydraulically opening grid cradle for easy maintenance and grid replacem ...

NEW, - 150cm width, - 219 kg dead weight, - 2 cylinders, with Merlo mount, photos are only an example !

- Producer Cefla/Sorbini - Type Ecolight - Year of construction 2000 - Working width 1.300 mm (1.445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Length cross bar conveyor - Cross-bar pitch ~ 115 mm - Width 2.300 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 38 kW - Voltage fluctuation max. +/- 5 %

Used Spiraslkneader W&P, Type: SF 75 -In good bakery condition- - for 120 kg dough or 75 kg flour - Everything technically checked - Ready for immediate use - El. Connection: 3 Ph, 50 Hz, 380 V, 19.6 A, 35 A Visits and test runs are possible by arrangement.

Equipment: Insulation,Condition: used,Volume: 120,000,Lower floor: Flat floor with slope,Design: upright,Stand form: Standing frame,Insulation: available,Material insulating jacket: Painted steel,Insulation thickness: 100,Diameter inside: 3,700,Diameter outside: 3,950,Cylindrical height: 13,000,Total height: 14,000,Manhole / dome: in cylinder,Nameplate: No,Outlet: present,Last use: Food / Dairy,Material in contact with the product: V2A 1.4301 (AISI304), Bottom Bearings: No,Current Interferers: No,Ground Bearings: No,Current Disturbers: No

Equipment: Insulation, agitator,Condition: used,Volume: 120,000,Lower floor: flat floor with slope,Design: upright,Standing form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Diameter inside: 3,650,Cylindrical height: 11,500,Total height: 12,860,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Insulating cladding and insulation in the area of the stand frame plus 30 cm above it removed (see pictures),last Intended use: Food,Material in contact with the product: V2A 1.4301 (AISI304),Power: 1.0 / 4.4,Speed: 470

Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit with: 1x pump and pressure equalization -1x Hydraulic pumps: of type -1x pump max. pressure: 120 bar -1x pump max. flow rate: 30 l/min -1x Drive: 7.5 kW 1450 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1010/760/H1325 mm -Weight: 532 kg

Servo motor three-phase motor, electric motor, direct current motor, pitch motor -MOOG: DC motor FGVR 180L4-DA-BC-C -Speed: 1250 rpm -Torque: 120 Nm -Voltage: 400 VDC -with: brake/fan/heater/encoder -Shaft: Ø 50 x 70 mm -Construction: B5 -Protection class: IP54 -Price: per piece -Number: 2 pieces -Dimensions: 920/448/H490 mm -Weight: 301 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 110 mm -Piston rod: Ø 60 mm -Cylinder tube outer diameter: Ø 115 mm -Stroke: 1200 mm -Total length retracted, center to center of hole: 1465 mm -Piston rod mounting: Ø 30 mm -Cylinder mounting: Ø 30 mm - Universally applicable: -Number: 2 cylinders available - Price: per piece -Dimensions: 1530/115/H130 mm -Weight: 62 kg/piece

Gear motor, electric motor, electric gear motor -Power: 0.55 kW -Diameter hollow shaft: 20 mm -Speed hollow shaft: 120 rpm -Diameter shaft: 8 mm -Speed shaft: 1500 rpm -Construction: hollow shaft -Protection class: IP 44 -Number: 2x motor available -Price: per piece -Dimensions: 490/160/H235 mm -Weight: 19 kg

adjustable gear motor, variable speed gear motor, electric motor -Handover in the current condition, as inspected -Receptacle and handwheel for adjustment are missing -Manufacturer engine Prym type: AD80KZ4 -Manufacturer gearbox Prym type: L8-U16 -Motor power: 0.55 kW -Speed range: 24-120 rpm -Motor: adjustable -Construction: B3 -Drive shaft: Ø 24 mm -Dimensions: 535/230/H220 mm -Weight: 28 kg

Lathe, turning machine, lead screw lathe, lead screw lathe -Manufacturer: Mondiale, lead screw lathe type Celtic 20 -Turning length: 1200 mm -Turning Ø over bed: 440 mm -Turning Ø without bed: 640 mm -Turning Ø over support: 280 mm -Spindle bore: Ø 45 mm -Spindle speeds: 22 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 1120/2230/H1215 mm -Weight: 1276 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, transport trailer, refuse transport trailer -Manufacturer: Franke, transport trailer low loader, refuse transport trailer type TA-MC -Platform: Length 2750 mm, dimensions see photos / technical drawing -Load capacity: 1200 kg -Maximum speed: 25 km/h -Number: 2 trailers available -Price: per piece -Transport dimensions: 5100/1735/H1740 mm -Empty weight: 840 kg/unit

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: FMB Blickle, hydraulic unit with hydraulic tank from rotary transfer machine Uldrian TSM 22-8 -Hydraulic pump: pressure up to 120 bar -Flow rate: 22 l/min -Motor: 4 kW / 1500 rpm -Hydraulic tank: with level indicator, tank capacity 100 l -Oil cooler -Individual components: see photos -Dimensions: 720/500/H1630 mm -Weight: 293 kg

Air filter, filter element, filter cartridge, spin-on filter, engine air filter, compressor filter, air filter element, air filter insert -Filter elements: Air filters 120 pieces -Type: Various types from different manufacturers -Price/Fee: complete -Transport dimensions: 1200/800/H900 mm -Total weight: 151 kg

DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer: Kählig, DC geared motor -Type: M63x60/I SN31 IGM4/2 -Voltage: 110V -Torque: 324 N/cm -Speed: 120 rpm -Technical data: see photo of the type plate -Shaft: Ø 10 x 25 mm -Number: 15 motors available -Price: per piece -Dimensions: 220/90/H100 mm -Weight: 2.6 kg/pc.

Duct dimensions: about 500x2000x1200 mm each Auction-ID: A7-45347-664

Drawing line Composed of Reel handling unit Module 1 Drawing machine SAMPSISTEMI TE/40-MA year 2019 Module 2 Drawing machine SAMPSISTEMI MT 250 4A year 2009 Including wire drawing machine, furnace and winding machine Maximum input material diameter 3.0 mm Minimum output material diameter 1.5 mm Ideal for large reels (800-900 kg) Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-666

Spiral mixer KEMPER, type: ECO 75 - for approx. 120 kg dough, 75 kg flour - Machine in used condition - is still being cleaned and technically checked - Overhaul possible: all parts are renewed, new paintwork, new bearings, new belts, new time clocks, etc. Visits and test runs are possible by arrangement.

Lifting mixer DIOSNA, type: S120 Plus -In very good condition- - for 120 kg rye dough and 90 kg wheat dough - for 75 kg rye flour and 58 kg wheat flour - The "Plus" kneader runs faster than a normal lifting kneader - New two-step switch, no footswitch - More powerful "plus engine" - 2 speeds - Plastic flour dust cover - Machine can be driven on wheels - With rotary wheel to lock or release the wheel brake - Condition: technically very good, everything checked - The machine runs very smoothly, we can send a video - Ready for immediate use The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrangement.

Lifting kneader KEMPER, type: F 75 SL -in very good condition- - Kettle for 75 kg flour or 120kg dough - 2 speeds - Kettle and kneading arm made of stainless steel - Incl. stainless steel dust cover - New V-belt - El. Connection: 220 / 380 V, 50 Hz - Condition: Very good, ready to use Visits and test runs are possible by arrangement.

Very good spiral mixer KEMPER, type: SPL 75 -overhauled- - for 120 kg of dough or 75 kg of flour - 2 new time clocks - 2 gears and 2 speeds - Stainless steel spiral and boiler - All wear parts renewed - new belts, restocked, repainted, etc. - Condition: very good, - everything completely overhauled, as good as new - Ready for immediate use - incl. 6 months warranty Inspection and test run are possible on request.

Allimex Allislide Mid Clamp 1 pallet with 24 boxes of 500 pieces Auction-ID: A1-44832-67

Allimex Allislide Mid Clamp 12 boxes with 100 pieces Auction-ID: A1-44832-64

End clamp Allimex Allislide 12 boxes with 100 pieces Auction-ID: A1-44832-59

Tool trolley with 30 mm thick solid wood top. Solid ball-bearing drawers (double bearings) All drawers can be opened 100%. Equipped with scratch and impact resistant powder coating. Each drawer is equipped with an anti-slip mat. All drawers are equipped with a drawer lock. The doors are equipped with a magnetic closure and lock. Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. 2 x 125 mm. Heavy swivel castor with brake. 2 x 125 mm. Heavy fixed castors. 1 x Sturdy solid steel handle. 3 x lock for all drawers and doors. Number of drawers 10 pcs. Net weight 162 kg Dimensions L-W-H 1200 x 800 x 1050 mm Condition: never used / new (5) Auction-ID: A1-45681-862

Ex-landlord devices Auction-ID: A1-45690-13

Workbench with 4 drawers and solid wood worktop Dimensions of the large drawer (WxDxH) 940 x 400 x 80 mm Dimensions small drawer (WxDxH) 460 x 400 x 80 mm Dimensions small drawer (WxDxH) 465 x 395 x 440 mm Height adjustment max.30 mm Length 1200 mm Width 600 mm Height above floor 860 mm Table load 250 kg Dimensions L x W x H 1200 x 600 x 400 m Weight 49 kg Condition: never used / new (5) Auction-ID: A1-45681-794

Workbench with 5 drawers, 1 door and solid wood worktop Dimensions 1200 x 600 x 25 mm Dimensions of the drawers (inside) 430 x 400 x 110 mm Door dimensions 460 x 380 mm Length 1200 mm Width 600 mm Dimensions L x W x H 1200 x 600 x 400 m Weight 47 kg Condition: never used / new (5) Auction-ID: A1-45681-702

Ex-landlord device, UVV inspection until 9/2026. Auction-ID: A1-45690-6

Ex-landlord devices Auction-ID: A1-45690-14

Workbench with 8 drawers and solid wood worktop Dimensions 1200 x 600 x 25 mm Dimensions of the drawers (inside) 430 x 400 x 110 mm Length 1200 mm Width 600 mm Height above floor 860 mm Dimensions L x W x H 1200 x 600 x 400 m Weight 49 kg Condition: never used / new (5) Auction-ID: A1-45681-783

Ex-landlord devices Auction-ID: A1-45690-15

Meiko DV 120 T dishwasher, with accessories + dish rack, dishwasher in use until December 2025 Auction-ID: A7-45677-63

New BEL M124A Laboratory Balance - 120g - 0.1mg New equipment in its original packaging Technical Parameters: Precision balance reference M124A Legibility: 0.1 mg (10-4 g) Maximum capacity: 120 g Repeatability: 0.1 mg Linearity: 0.3 mg Dimensions of the top: diameter 80 mm Chamber dimensions (W x D x H): 162 x 171 x 225mm Net weight approx. 6.3 kg Scale dimensions (W x D x H): 215 x 345 x 345 mm

Pull, cross-cut and mitre saw FESTOOL KS 120 EB year 2011, blade ø 260/30 mm, S/N 10763964, 1,600 W, w. 2 roller raceways metal, each approx. 160x45 cm, roller block

Digital spirit level BOSCH DNM 120 L, bag

Whiteboard approx. 120x85 cm

A deposit of €300.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Positioning accuracy +/- 10  Repeatability +/- 5 24-position tool changer Max tool diameter 75 mm Max tool length 250 mm Max tool weight 6 kg Work tables, utensils and accessories included WARNING! FOR TRANSPORT, EXCEPTIONAL TRANSPORT WITHIN 3 METERS IN WIDTH IS REQUIRED Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-7

A deposit of €450.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-6

Tool cabinet incl. contents - Multifix Holder Greetings C - Flex from Fein - more small parts see pictures Auction-ID: A7-45761-839

Edge milling machine on trolleys see pictures Condition: unchecked (6) Auction-ID: A7-45761-816

with cutting motor: 1.5 kW, 3-phase, 1 M (inverter controlled) Pitch setting (L): Max. 1200mm, including: metal trolley: 1050 x 500 x 880 mm (L/W/H), including: rolling stand with contents, dimensions: 1840 x 1630 x 900 mm (L/W/H) Hall 1 Auction-ID: A1-45762-1