demag 120 used for sale

Description DEMAG DR-PRO 10 indoor crane, high-quality and hardly used due to plant closure Details Factory No. 96755742 Load capacity 10,000 kg Reeving 4/1 Lifting speed 4 m/min FEM group 2 m Commissioning: 01.06.20216 Steel wire rope changed 02.05.2018 Determination of theor. Period of use as of 05.06.2018: Total use 18.4 h / theor. Operating time 1,600 h / consumed portion theor. Usage 1.1% / Usage reserve 1,581.6 h (protocols of the last checks are available) Accessories 4 pieces C-hook for indoor crane on request incl. documentation

SUMITOMO-DEMAG IntElect 210/580 Clamping force : 210 Tons Screw diameter : 35.0 mm Tie bar spacing (H) : 580.0 mm Tie bar spacing (V) : 580.0 mm Shot volume : 178.0 cm³ Shot weight : 158.0 g Pressure on material : 2800 bar Platen length : 880.0 mm Platen width : 850.0 mm Opening of the press : 1265.0 mm Mould size : 690 Length x width x height : 6260.0 mm × 1555.0 mm × 2071.0 mm Weight : 9800.0 kg Worked hours : 26615 hours Hours under power : 32244 hours State excellent At local norms : yes Status : under power max inj stroke -185 mm Operating hours – CPU-32143 ,Drives -26215 ,Heating -26500 Total cycle -16686388 Clamping Force 2100 KN Injection unit 500 Screw diameter 35 mm 400 V / 50 HZ Manufacture year –October 2010 Net Weight-9800 kg Injection and Clamp Drives renewed in 2015 The machine is in excellent condit ...

Molding machine of Mag Type: Ergotech 1300-12000 system, with rice robot control: NC4 year: 1996 Clamping unit Clamping force t: 1300 opening stroke mm: 1500 Holm dimension mm: 1500 x 1250 min/max height mm: 700/1400 Plate size: 2150 x 1880 injection unit Screw diameter mm: 130 injection weight gr: 6060 Injection volume cm 3: 6730 spray pressure bar: 1799 Dimensions and weights Dimensions Lxwxh m: 14.1 x 3.2 x 2.7 machine weight kg: 60,000/20,000 Miscellaneous Nuclear trains with rice robot EUROMAP 12

Key data: 350 , 78 , 30

Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct

Control type: NC4 Closing force: 200T Opening stroke: 500 mm Between columns: 610 x 610 mm Tray dimensions: 830 X 830 mm Mini / maxi mold: 310/660 mm Max distance between plates: 1235 mm Screw diameter: 45/25 mm Screw length: 20 D cm3: 322/61 Bars: 1900/2006 Motor power: 30KW Heating power: 13KW Closing weight: 10T1 Cores: 2 Robot interface Bi metal Others: turntable, 2 blow guns

Machine: DEMAG 200T BI MAT 610H / 120 BI MAT Year: 2000 Control type: NC4 Number of hours: 31 500H Closing Closing force: 200T Opening stroke: 500 mm Between columns: 610 x 610 mm Tray dimensions: 830 X 830 mm Mini / maxi mold: 310/660 mm Max distance between plates: 1235 mm Injection: Screw diameter: 45/25 mm Screw length: 20 D cm3: 322/61 Bars: 1900/2006 General: Motor power: 30KW Heating power: 13KW Closing weight: 10T1 Dimensions length: 5M70 Dimensions width: 1M70 Dimensions height: 2M10 Options: Cores: 2 Robot interface: YES Bi metal: YES Others: turntable, 2 blow guns

Year of manufacture: 2004 Type of control: NC4 Number of hours: 27,000 H Closing force: 200T Opening stroke: 575 mm Distance between columns: 560 x 560 mm Tray dimensions: 830 X 830 mm Mini/maxi mould: 310/660 mm Max gap between trays: 1235 mm Screw diameter: 50/25 mm Screw length: 20 D Injection volume: 442/61 cm3 Injection pressure: 1946/1940 bar Motor power: 30KW Heating power: 14.8 KW Closing weight: 10T Dimensions length: 5.70 m Dimensions width: 1.70 m Dimensions height: 2.10 m 1 hydraulic core robot interface Bi-metal Turntable

Brand DEMAG Type ERGOTECH system 500-120 NC4 year of manufacture 1998 Clamping unit clamping force 50 ton opening stroke 400 mm Beam dimension (h x v) 320 x 320 mm Installation height min. 210 mm Installation height max. 610 mm Platen size (h x v) 540 x 530 mm Injection unit Screw diameter 22 mm Injection volume 42 cm³ Injection weight PS 37 gr Injection pressure 2591 bar Dimensions and weights Dimensions LxWxH 3,6 x 1,5 x 1,8 m Machine weight 3100 kg

This used DEMAG Ergotech System 1500-440/120 injection moulding machine was manufactured in 1999, equipped with handling features for enhanced productivity and ease of use. As an injection moulding machine, it offers reliable performance and precision in moulding operations, making it a valuable asset for production lines requiring high-quality plastic components. The opportunity to buy this DEMAG Ergotech System 1500-440/120 injection moulding machine represents a strategic investment for businesses looking to upgrade or expand their manufacturing capabilities. For more details, please contact us.

This used injection moulding machine manufactured in 2001 by DEMAG, model D125-320h/120v, comes with handling features, designed to optimize production efficiency and reliability. A robust example of engineering excellence, this machine stands out for its precise performance and durability. The technical specifications highlight its adaptability to various production requirements, making the DEMAG D125-320h/120v machine we have for sale a valuable asset for any production line seeking quality and consistency. For further details, please contact us.

This injection moulding machine was manufactured in 1999. The DEMAG D110-310H/120V stands out for its robust design and reliable performance over the years. Known for its efficiency in production environments, this model has been a staple for businesses seeking to enhance their manufacturing capabilities. This DEMAG machine we have for sale represents an opportunity to acquire proven machinery with a track record of success. For further details, please contact us to discuss how this machine can meet your needs.

This DEMAG Ergo-Tech 110-310H-120V injection moulding machine was manufactured in 2002, offering precision and reliability for various production needs. Its notable for its efficiency and ease of use, designed to streamline manufacturing processes. This DEMAG machine we have for sale represents a solid addition to any production line, enhancing output with its proven performance. Contact us for further details.

Key data: 500 kN

Demag Ergotech Compact 500-120 / machine in very good technical condition Year of construction: 1993 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Spray pressure: 2000 bar Dosing volume: 61.3 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 1 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 5.1 kW Total power: 20.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live  ...

Demag Ergotech 160/520-600 Santosh and Demag Ergotech 120-320 System Injection Moulding Machine Prefer to sell both together Price for both machines

Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains

Demag hose pouring machine type: Ergotech per 80-400 controls: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 80 cross-beam measures mm: 400 installation height min / max. mm: 250 record sizes: 580 x 580 hose unity snail diameter mm: 40 hose weights gr: 205 hose volumes cm?: 217 mass and weights dimensions LxBxH m: 4.13 x 1.13 x 1.81 machine weights kg: 3800 other 1x nuclear train, new cylinder with snail

CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

Demag hose pouring machine type: Ergotech 330-840 systems control: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 330 cross-beam measures mm: 815 x 735 installation height min / max. mm: 330830 record sizes: 1040 x 950 hose unity snail diameter mm: 60 hose weights gr: 560 hose volumes cm?: 636 hose pressure cash: 1351 mass and weights dimensions LxBxH m: 6.5 x 1.9 x 2.2 machine weights kg: 14500

Molding machine of Mag Type: Ergotech 100-430, El Exis control: NC 4 year of construction: 2000 Clamping unit Clamping force t 100 Gap mm: 445 Holm dimension mm: min/max height of 420 x 420 mm: 460 / 560 Plate size: 690 x 660 injection unit Screw diameter mm: Gr 40 injection weight: 210 Injection volume cm m³: 231 Spray pressure bar: 1855 Dimensions and weights Dimensions Lxwxh m: 5 x 1.6 x 2 machine weight kg: 6900 Miscellaneous 1 Core pull of armored snail

Molding machine of Mag Type: Ergotech 100-310 compact control: NC 4 year of construction: 1997 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 590 x 590 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168.3 Spray pressure bar: 2640 Dimensions and weights Dimensions Lxwxh m: 4.4 x 1.4 x 1.8 machine weight kg: 4400 Miscellaneous EUROMAP 12,Pneumatikventil

Molding machine of Mag Type: Ergotech 100-400 Viva control: NC 4 year of construction: 1998 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 /. Plate size: 580 x 580 Injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm m³: 231.1 Spray pressure bar: 1828 Dimensions and weights Dimensions Lxwxh m: 4.25 x 1.27 x 1.79

Molding machine of Mag Type: Ergotech 50-200 Control Panel: NC 4 year of construction: 1993 Clamping unit Clamping force t 50 Gap mm: 400 Holm dimension mm: 320 x 320 min/max height mm: 210 Plate size: 530 x 540 Injection unit Screw diameter mm: Gr 25 injection weight: 54 Injection volume cm m³: 61.3 Spray pressure bar: 2740 Dimensions and weights Dimensions Lxwxh m: 3.7 X 1.4 X 1.7 machine weight kg: 3250 Miscellaneous HEATING CHANNEL CONTROL 4 COMPARTMENT

Molding machine of Mag Type: Ergotech 60/420-310 system control: NC 4 year of construction: 1999 Clamping unit Clamping force t 60 Gap mm: 450 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 600 x 600 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168 Spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 4.1 x 1.36 x 1.8 machine weight kg: 3.950 Miscellaneous 1 x 2 battery pump system

Molding machine of Mag Type: Ergotech 25-80 compact control: NC 4 year of construction: 1994 Clamping unit Clamping force t 25 Gap mm: 350 Holm dimension mm: 280 x 280 min/max height mm: 105 /. Plate size: 390 x 390 Injection unit Screw diameter mm: Gr 22 injection weight: 37 Injection volume cm m³: 42 Injection pressure bar: 2061 Dimensions and weights Dimensions Lxwxh m: 3 x 1.05 x 1.9 machine weight kg: 1550

emag injection molding machine Type: Ergotech 80-310 compact control: NC 4 year of construction: 1994 Clamping unit Clamping force t 80 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168.3 Spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 3.9 x 1.4 x 1.9 machine weight kg: 3600

Molding machine of Mag Type: Ergotech 650-8000 system control: NC 4 year of construction: 1998 Clamping unit Clamping force t: 650 gap mm: 930 Min/max height mm: 450/950 injection unit Screw diameter mm: 110 Injection weight gr: 3930 Injection volume cm m³: 4372 Spray pressure bar: 1815 Miscellaneous 4 core pull 2 pumping sytems

Injection molding machine Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t: 250 gap mm: 675 Holm dimension mm: 560 x 560 min/max height mm: 310 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm m³: 1039 Spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2 machine weight kg: 11.200 Miscellaneous Two pump system EUROMAP 12 2 core pull

Injection molding machine Type: Ergotech 35-115 Viva control: NC4 year: 2003 Clamping unit Clamping force t 35 Gap mm: 350 Holm dimension mm: 280 x 280 min/max height mm: 180 Plate size: 410 x 410 injection unit Screw diameter mm: 30 Injection weight gr: 80 Injection volume cm m³: 88 Spray pressure bar: 1393 Dimensions and weights Dimensions Lxwxh m: 3.3 x 1.05 x 1.94 machine weight kg: 1600

Molding machine of Mag Type: Ergotech, 150/500-840 concept control: NC 4 year of construction: 2001 Clamping unit Clamping force t Gap 150 mm: 500 Holm dimension mm: 500 x 500 min/max height mm: 275 / 585 Plate size: 1085 x 1185 injection unit Screw diameter mm: 50 Injection weight gr: 402 Injection volume cm m³: 442 Spray pressure bar: 1946 Dimensions and weights Dimensions Lxwxh m: 5.2 x 1.6 x 2.1 machine weight kg: 7,800

Injection molding machine Type: Ergotech 330-2300 system control: NC 4 year of construction: 1998 Clamping unit Clamping force t 330 Gap mm: 675 Holm dimension mm: 710 x 630 min/max height mm: 330 / 830 Plate size: 1040 x 950 injection unit Screw diameter mm: Gr 80 injection weight: 1430 Injection volume cm m³: 1583 Spray pressure bar: 1437 Dimensions and weights Dimensions Lxwxh m: 6.5 x 2 x 2.1 machine weight kg: 16,000 Miscellaneous Two pump system EUROMAP 12 2 core pull

Molding machine of Mag Type: Ergotech 420/800-3300 system control: NC 4 year: 2000 Clamping unit Clamping force t 420 gap mm: 710 Holm dimension mm: 810 x 710 min/max height mm: 820 / 940 Plate size: 1200 x 1100 injection unit Screw diameter mm: Gr 80 injection weight: 1600 Injection volume cm 3: 1779 spray pressure bar: 1855 Dimensions and weights Dimensions Lxwxh m: 7.8 x 2.2 x 2.4 machine weight kg: 21000 Miscellaneous 4 core EUROMAP 12

Molding machine of Mag Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t Gap between 250 mm: 575 Holm dimension mm: 560 x 560 min/max height mm: 660 / 760 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm 3: 1039 spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2.2 machine weight kg: 11200 Miscellaneous 2 core EUROMAP 12

Molding machine of Mag Type: Ergotech 100-430 system control: NC 4 year of construction: 1999 Clamping unit Clamping force t 100 gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 / 750 Plate size: 590 x 590 injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm 3: 231 spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 4.4 x 1.4 x 1.8 machine weight kg: 4400 Miscellaneous EUROMAP pull 12, 1 core

Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...

Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

10 pcs. crane runway length approx. 9.5m long HEA 200/190 (s=6 mm) Crane rails 40 x 40 mm Accessories Available on request at an additional cost: - Circuit rail VAHLE Assembly On request, installation/assembly/recommissioning, also constructive changes (wingspan, hoisting unit, etc.), can of course be carried out by us in accordance with relevant regulations or with acceptance(s) throughout Europe. Visit A visit is possible at any time and at short notice, whereby the crane can also be tested under electricity if necessary. to ask? Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info.torlach EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with track connection and container loading ! - O ...

Used Machine

Molding machine of Mag Type: Ergotech 3500-3300, control panel: NC4 year: 2002 Clamping unit Clamping force t: 350 gap mm: 930 Holm dimension mm: 1250 x 1250 min/max height mm: 600-1200 Injection unit Screw diameter mm: 95 injection weight gr: 2260 Injection volume cm 3: 2509 spray pressure bar: 1316 Dimensions and weights Dimensions Lxwxh m: 5.8 x 3.1 x 2.65 machine weight kg: 34,000/7,000 Miscellaneous Europe 63 4 core cascade system PDF FILE PRINTING CONTACT

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

2 pieces of crane bottles

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested double girder overhead travelling crane Payload 10.000 kg Wingspan currently and possible about 11,500 mm Hook path Max approx. 8,000 mm Make ABUS/Demag Workshop examination 2016 with separate DEMAG two-rail wind plant trolley & single-sided catwalk Working speeds: Hoist 2-tier Trolley gear 2-speed Crane chassis 2-speed