demag 120 used for sale

Harro Höfliger MKT 120 horizontal end load cartoner, intermittent motion, bucket infeed, with GUK FA21/4 Cartonac 91 leaflet feeder, glue closure with Nordson ProBlue 4 hot melt unit, minimum carton size 15 x 15 x 60 mm up to maximum 100 x 80x 200 mm, mechanical output up to 120 cartons per minute.

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Automatic machine Bag machine for the production of bags on roll. Capacity 50 bags / minute (depends on the size) Machine width 1200 mm Unwinder width = 1200 mm (tubular film) Core Magazine Folding unit for C folding Floor welding and perforating unit Automatic winder (turnstile) with automatic sleeve feed

Brand Eurotec Dimensions LxWxH (mm) Outside: 600 x 400 x 120 / Inside: 570 x 370 x 100 Weight (Kg) ca 1,86 each Number of pieces in stock 5202 Made in Germany Comments Used but good condition, ex-freeze usage

Lifting swaging machine Diosna S 120 Plus A used dough kneader Diosna S 120 for a maximum of 120kg dough, with 2 speeds, slow and fast is for sale and immediately available in our warehouse. Kneader Diosna S 120 - with 1 automatic timer - Machine is revised and repainted - with 2 gears - with stainless steel boiler - with flour dust cover - mobile on wheels with lock

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: ball bearings -Hole spacing: 350 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 395/85/H400 mm -Weight: 14 kg

BOWL CUTTER WITH EMPTIER MEISSNER, TYPE: COM-120 Technical description: Serial number: 718810 Material: Stainless steel Aisi-304 Power supply: 380-440V/50-60 Hz Bowl capacity: 120 lt Dimensions: 2100 x 1450 x 1570 mm

Grundfos circulating pump UPS 32-120 F 220 for sale, with original packaging

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, -Adjustment: via trapezoidal thread -Adjustment range: 120 - 175 mm -Price: for all 2 pieces -Weight: 4 kg

Tamper Evident labelling machine for applying labels to both sides of folding boxes. Machine incl. PCE Pharmacontrol Pilot 4.1.0. which controls and manages units such as printer, cameras and scanner. Labeller is fitted with WOLKE Printer

Fabr: Kuper Machine type: ST/I-1200 Machine number: 7560 Year: 1991 Power: approx. 51kW Working width: 1200mm PROVIDER

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: mm -Dimensions: 60 x 120 mm -Length: 415 mm -Weight: 10 kg

The scope of delivery includes: 01x Rear wall grille, used Material color: similar. beige overall width: approx. 1,200 mm total height: approx. 1,100 mm Mesh size (outer): approx. 93 x 53 mm Mesh size (inside): approx. 88 x 48 mm Frame profile dimensions: L-profile 30 x 30 mm The rear wall grilles are rusted, partially the frame profile is damaged, see pictures.

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production

Rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Actuator for: gate valves, locks, ball valves ... -Construction: hollow shaft -Diameter hollow shaft: 120 mm -Number: 3x drives available -Price: per piece -Dimensions: 1700/500/H650 mm -Weight: 450 kg

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production

WEIBERT WJ-1200 Lathe Distance between centers 1200mm Center height 215mm Spindle thread M33 Spindle speeds 500/1000/2000/2800 Motor output power 1.5KW Face plate Hand rest concurrent grain tip 400V and 230V G&WJ-1200 Net price 1639,-€ with VAT 1950,-€ Option: spindle speeds infinitely variable net 790,-€

Lifting kneading machine Diosna Capacity: 120 kg dough With protective grille 2 speeds via foot pedal Condition: Repaired

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller

Colloid mill Manufacturer: Probst & Class (PUC) Type: N/120/E No.: 84.025 Power: 6.5 kW very good condition LWH: 700 x 400 x 400 mm

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 18 rpm -Power: 0.37kw -Construction: B5 angle -Diameter shaft: 35 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 490/261/H300 mm -Weight: 38kg

Standpipe valve 1 1/2 for wash basin -Basin depth: 300 mm -Water level: 270 mm -Number: 37x available -Price: per piece -Weight: 0.4 kg

We sell a tank wagon for a Sinmag SM 120 A. There are 3 pcs available

Diosna Spiral Mixer Type: SP 120 D 2 touch timers 2 speeds Spiral stainless steel Stainless steel boiler Flour dust cover for 75kg flour or 120kg dough on castors with brakes 380V 50Hz Overhauled and repainted Height: 125cm Width: 85cm Depth: 130cm

Roller conveyor, roller conveyor, roller conveyor -Roll width: 500 mm -Conveying length: 1200 mm -Diameter roller: 50 mm -Roller conveyor height: 280 mm -Dimensions: 650/1350/H280 mm -Weight: 70 kg

Tailstock, counter bearing for dividing head, dividing head -Peak height: 120 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 170/100/H130 mm -Weight: 6.4 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,200 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 8,14 kg Internal designation: RW-2

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

Universal kneader, Fabr. W & P , Type UC 120 A

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg

Telescopic spring spindle guard CNC PLC -Type: TF 050-2100-120 V/H -Length: 2100 mm -Diameter: Ø 120 mm -Weight: 4.5 kg

Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings -Pipe sealing cushions: DN1200 -Diameter: 1200 mm -Dimensions: 1200 x 450 mm -Weight: 200 kg

Collecting pan, floor pan, collecting container, flat steel pan, collecting pan for coolant liquid -Collecting tray: for chips with coolant liquid, 1200 x 800 mm -Trough height: 400 mm, can be shortened -Rectangular cutout: 420 x 215 mm -Dimensions: 1200/800 / H400 mm -Weight: 10 kg

Bank of 4x Bradley & Turton 120ton Upstroke Presses 20” / 500mm sq electrically heated platens Daylight adjustable 18” 2200psi 12” Ram diam. 12” stroke Return rams Solid state relay Hydraulic valve for Press up / down Quantity available: 4 complete with 1x pump unit.

Planetary stirrer, Fabr. DOLMAC, Type MX 12 - 120 l

Hubkneter, Fabr. Diosna Type S 120

Heating, gas and oil burners, burner control, burner flap control, flue gas flap control -Burner control: Flap control burner -Type: unfortunately no type designation -Shaft: Ø 12 x 25 mm -Hole spacing: 50/65 mm M6 -Dimensions: 120/120 / H140 mm -Weight: 1.5 kg

Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg

Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Rotary indexing table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized height adjustment, liquid paste system (guns + pressure tank), incl. control cabinet Price and further details on request.

Spiral kneader, Fabr. Diosna, Type SP 120 D

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 120182 plasma nozzle -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.2kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, press cylinder -Manufacturer: Hänchen, hydraulic cylinder type 120 10100-01 -Piston: Ø 60 mm -Piston rod: Ø 30 mm / M24 x 1.5 -Stroke: 50 mm -Max. pressure: 150 bar -Dimensions: Ø 95/270 mm -Weight: 9 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm -Weight: 10 kg

Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty