demag 120 used for sale

Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL

CSAT printing system for blister film coloured printing. Unit is suitable for printing counterfeit-proof solutions for pharmaceutical packaging. Resolution: 1,200 dpi, output: 0.5 to 20 m/min.

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 521 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 392 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 408 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 544 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...

MEGAPLOT XTR PRO 1200 CNC foam cutting machine was built in 2020 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine enables precise cutting of any shape in a wide range of rigid foams, soft foams and rockwool. Cutting is performed fully automatically by means of an endless wire, which accelerates to a speed of 280 km/h. Project files, including shapes and their layout, can be prepared in any graphics program (CorelDraw, AutoCAD etc.). This is because the advanced FastWire software supports all major file formats. The MEGAPLOT XTR PRO upholstery foam cutting machine is also equipped with a controller which enables simulation of the cutting process and setting of the machining parameters with their change during the cutting. All this makes the offered machine an excellent choice for businesses producing, among others, insulation elements, packaging and upholstered furniture. Tec ...

Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.

Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

SANDRETTO MEGA T 1200

- Special: with carton box passage - Very few operating hours - Condition technically and optically practically as good as new Dimensions: - Length: 3300 mm - Width: 900 mm - Height: 1800 mm

length: 1200 mm width: 600 mm height over floor: 860 mm table load capacity: Kg dimensions: 1200 x 600 x 400 m weight: 47 kg Workbench with 5 drawers, 1 door and solid wood worktop Dimensions 1200x600x25mm Drawer dimensions (internal) 430 x 400 x 110 mm Door dimensions 460 x 380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: Honing Machine Manufacturer: Pemamo Type: MDR 120 E Year of construction: 1999 / Commissioning 2003 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 2.850 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference number M-PEM-0126 DESCRIPTION We offer you a used honing machine from the manufacturer Pemamo. Incl. adapters 1040-510 and 1040-11-20 see last picture With fine adjuster. Weight: 135kg Further dates will follow. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

table length: 1200 mm table width: 800 mm : 28 mm table height: 450 - 800 mm : 500 kg weight of the machine ca.: 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral kneader Diosna SP 120 D Spiral kneading dough kneader from Diosna SP 120 D with solid stainless steel boiler for a maximum of 120 kg of dough.Kneading process over time with 2 timers, with automatic switching and shutdown.Trade-in and delivery on request. Type: SP 120 D mobile for max. 75kg flour or for max. 120kg dough with 2 automatic timers Spiral and boiler made of stainless material Boiler diameter 75cm Boiler capacity approx. 180 litres Machine can be driven on castors with a swivel castor Locking by 2 locks with plastic flour dust cover Stainless steel spiral and boiler 400 Volt frequency 50 Hz Weight of the machine approx. 550 kg Condition "good"

Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request

NJP-1200C automatic capsule filling machine was built in 2022 in China by Guangdong Rich Packing Machinery Co., Ltd. Machine in very good condition, kept in a temperature and humidity controlled room. All moving parts were systematically lubricated according to the manufacturer’s recommendations. The NJP-1200C capsule filling machine is used in the pharmaceutical industry for mass production of medical products, i.e. drugs, supplements, etc. It enables fully automatic filling of hard capsules of size 00 and 0 with products in the form of powder or small granules. In one working cycle, empty capsules are fed, sorted, filled and sealed. The reliable design made of high-quality stainless steel meets stringent sanitary requirements, as well as maintaining high stability throughout its entire service life. All this makes the offered capsule filler an excellent choice for increasing the e ...

The machine is in good technical condition, after prior agreement it is possible to test it. - Nominal forming force: 120 t Working length: 3106 mm CNC control Delem (graphic 2D programming) Automatic calculation of bending sequence and collision detection Back gauge X axis with 2× manually adjustable stop fingers CNC electromotive height adjustment of the back gauge (R axis) CNC electrically controlled table deflection Upper tool adapter ROLLERI Equipment and accessories: - Front protective device (tilting door) - Rear protective device (sliding door) - 1× freely movable two-hand / foot control - Operating instructions including CE declaration

Key data: 450 , 1 , 1400

Payload 1200 kg Width 450 mm Coil external diameter - up to 1400 mm Motor 1.5 kW Speed adjustable by frequency conversion Btto 500 kg

WESTFALIA SAMM 12006 CREAM SEPARATOR FOR MILK & WHEY CAPACITY: 12.000 LT/H COMES WITH A SPARE HYDROULIC CLUTCH

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

automatic case erector + case sealer T-100 BDE, case sealer T-10 year 1999, pallet loader PD-120, Thermal ink jet system Diagraph IJ 3000 ES autmatic erecting station + carton seamer T-100 BDE, carton sealer T-10 year of construction 1999, Layer palletizer PD-120, Thermal ink jet system Diagraph IJ 3000 ES

::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced

Capacity: 120 Amp. – 19 kVA X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Table dimensions: 1,100 x 700 mm Distance head - table: 950 mm (max) Oil retainer: 1,700 x 1,000 x 650 mm Workpiece weight: 4,000 kg (Max) Control: CNC Datic S120

2 x Pallet trucks, Electric pallet trucks with standing platform, Electric pedestrian pallet truck 2 to., Jungheinrich, ERE 120 – used - : Price per piece from location: Pos 6: 2.250.-€ (net)! Pos 5: 3.950.-€ (net)! Manufacturer: Jungheinrich Type: EUA 120 Year of construction 2020 Load capacity: 2,000 kg Maximum stroke up to 122 mm Load center of gravity: 600 mm Travel speed: 9 km/h without load Lifting speed: without load 0.04 m/s Battery voltage: 24 V Battery capacity: 250 Ah Weight incl. battery: 630 kg Overall length: 1,847 mm Operating hours: see list, as of January 2026 – a few hours have been added in each case Incl. charger Condition: good Available: immediately Location: Erfurt, later Augsburg camp Pos 6 / 5 / more photos of the other devices on request! BRA 1/26 Year of construction ERE01 98285577 Pallet truck EUA 120 9.600 2020 ...

2012 Muratec MW 120 GT Metal 2012 Muratec MW 120 GT and more: Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes Tsugami NP-32 can be viewed under power. Currently not in operation 1992 yes Riello in operation, can be viewed during operation. 2002 yes

Communication module CM 1241 6ES7241-1CH32-0XB0 CM 1241 RS422/485 NEW GOODS - unopened Was delivered incorrectly.

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

gebr. Veneer press with brand new heating plates! Pressing area: 300 x 130 cm LONG FENCE LZT 120-SF YOC 1991 ges. Connected load: 26.5 kW (rated current: 42.0 A) Pressing area: 300 x 130 cm Electric heating plates aluminium (new) Surface finish: Anodized C-32 Operating temperature: max. 120°C Power per heating plate: 12,700 W Opening width: 400 mm 8 hydraulic cylinders each with a diameter of 80 mm all 8 cylinders newly sealed (new gasket set) Hydraulic oil renewed Cylinder preselection: Switching from 4 to 8 cylinders possible Total pressing force: 120 t Spec. Pressure: 3.0 kp/cm² (at 80%: 3.8 kp/cm²) Circumferential safety ripcord Automatic opening (time-controlled) Stroke limitation (timed) External dimensions: approx. 376 x 154 x 195 (WxDxH) Weight: 6.1 t

Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 18 mm -Number of teeth: 120 teeth -Weight: 6 kg

New Neu Anlasser / Bosch Starter 0001601007 Passend für die Motoren DEUTZ / MWM / Caterpillar Energy Solutions Typ TBG 620(k) und TCG 2020.

Veneer assembly machine model FWL 1200, Joining, gluing, thread and white gluing

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Dimensions: W800/H1200/D300 mm -Braids: several -Weight: 62 kg

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 120 x 50 mm Truss type: 120|16 clear width: 2,700 mm Design: Head traverse

Spiral dough mixer with fixed stainless steel kettle for max. 120 kg dough. Vat cover with swivelling lid part, motor protection by overcurrent relay, electrical switching and control unit in the machine. Kneading process over time with 2 timers and synchronous motor, with automatic switching and switch-off. -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough- -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor -Locking by 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -8 kW 18A -Weight of the machine approx. 550 kg -Condition "very good" as good as new