delta v used for sale

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1340 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 185/131/H175 mm -Weight: 6 kg

MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.

Bread cutter Model: Varia Integra Pro Model for installation in the sales counter! Simple operation via touchscreen 240 discs/min Cutting width/bread length 380mm Circular knife machine manual operation Disc thickness adjustable from 4 - 30 mm Dimensions: 805/849 x 720 x 860/950 mm, WxDxH Bread dimensions max: 380 x 340 x 160 mm L x D x H DGUV V3 called Connection 230V,1 kW New machine with 12 months warranty

electric motor, three-phase motor -Power: 1.4 kW -Speed: 2850 rpm -Shaft diameter: 18/22 mm -Design: B5 -Protection class: IP 56 -Weight: 15 kg

Electric motor, three-phase motor -Power: 2.1 kW -Speed: 2870 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 56 -Number: 1x motors available -Price: per piece -Dimensions: 290/160/H205 mm -Weight: 18 kg

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 2860 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 56 -Price: per piece -Number: 3x available -Dimensions: 285/160/H205 mm -Weight: 18.4 kg

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

tool adaptor: . weight: . kg material: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power 0.18 kW -Speed: 880 rpm -Shaft: Ø 14 mm -Construction: B3 -Protection class: -Dimensions: 215/135/H160 mm -Weight: 7.4 kg

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -Load capacity: kg -Tire size: 400 x 145 mm -Holding bore: 60 mm -Number: 3x wheels available -Price: per piece -Weight: 60 kg/piece

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Hori ...

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor -Motor power: 5.5 kW -Speed: 1435 rpm -Hydraulic pump -Max. Pressure: 60 bar -Liter output: 50 l/min -Dimensions: 720/640/H700 mm -Weight: 145 kg

Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 365/160/H200 mm -Weight: 12.8 kg

travel: 1600 mm length: 1600 mm width: 1200 mm spindle head according to: spindle turning speed range: 100-12000 U/min switching steps: feeding velocity x-Axis min./max.: mm y-Axis min./max.: mm Control: Fanuc Brand: OKK Type: VP1200 CNC brand: Fanuc CNC model: 160is-MB Year of make: 2004 Table length: 1.600 mm Table width: 1.300 mm X: 1.600 mm Y: 1.300 mm Z: 550 mm Throat depth: 560 mm Tool changer: 40 Minimum speed: 100 RPM Maximum speed: 12.000 RPM Max. workpiece diameter: 82 mm ø Maximum table load: 2.000 kg For additional information, please refer to the pdf file Machine dimensions: 5.800 x 3.200 x 2.800 mm Machine weight: 16.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck Multifix tool holder device tail stock coolant device Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool -Number: 2x SK40 holders -Adapter -Take: SK40 -1x mounting tool: Ø 13 x 22 mm -1x mounting tool: Ø 27 x 55 mm -suitable for: tool changer -Sale: only complete -Weight: 3.4 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Tool holder, milling holder, milling tool -Number: 5x SK50 holders -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 19.7 kg

technical details: - Number of goats: 6 pieces - Number of press beams: 6 pieces - Number of clamping wrenches: 4 pieces - Number of screeds (2,500 mm): 8 pieces - Number of wooden inserts: 6 pieces (1 x divided) Metrics: - Trestle height: 1,000 mm - Trestle width: 1,450 mm (1,410 mm) - Clamping height: 360 mm, minus the screed thickness of 140 mm = 220 mm! - Clamping area: 2,500 x 1,120 mm - Length of the screeds: 2,500 mm (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Tool holder, milling holder, milling tool -Number: 7x SK50 holders -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 28 kg

Gear motor, electric motor -Speed: 63 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Price: per piece -Number: 4x available -Dimensions: 370/140/H195 mm -Weight: 12.8 kg

Gear motor, electric motor, electric gear motor -Power: 0.37 kW -Diameter shaft: 22 mm -Speed shaft: 100 rpm -Construction: B5 -Protection class: IP 54 -Number: 1x engine available -Price: per piece -Dimensions: 370/140/H200 mm -Weight: 12 kg

Gear motor, electric motor -Speed: 125 rpm -Power: 0.6 kW -Construction: B5 -Diameter shaft: Ø 24 mm -Protection class: IP 44 -Dimensions: 365/160/H215 mm -Weight: 19 kg

Tool holder, milling holder, milling tool -Number: 2x adapter mounts SK50/SK45 -Number: 22x SK45 holders -different designs -Drill chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Weight: 90.2 kg

Gear motor, electric motor -Speed: 82 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Dimensions: 390/210/H180 mm -Weight: 15 kg

Webo BR 35 V / 1250 Radial Drill Workspace Delete. v Spindle to stand smallest 280 mm / largest 1250 mm Delete. v Spindle or drill. b. Table top smallest 0 mm / largest 900 mm Delete. v Spindle to base plate smallest 200 mm / largest 1400 mm Diameter of the drill smallest 860mm / largest 2800 mm Swivel range 2,200mm / clamping diameter approx. 240mm Aufspannfl. upper 650 x 500 mm / side 770 x 500 mm Drilling spindle 40/85 ⌀ mm Speed 30 - 1800 rpm Year of construction 1971 Further technical data can be found on the machine map Item condition: used, impeccably and top maintained. Action components: Only the Webo BR 35 V / 1250 without the shown reversible clamp, this can be done individually or as a combination offer in our other Auction can be purchased. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loadin ...

Gear motor, electric motor -Speed: 63 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Number: 1x geared motors available -Price: per piece -Weight: 19 kg

REF-2259 SOMME DIANA-363-VAC AUTOMATIC CAN SEAMER WITH 6 HEADS AND SOMME 21-VALVE VACUUM FILLING SYSTEM Automatic tin can seaming machine with 6 seaming heads. Fitted with a 21-valve vacuum filling unit. Manufacturer: SOMME. Model: Diana-363-VAC Output: 12-15,000 Cans/ hour Can size: Ø 73mm. Overall dimensions: length 4,200mm, width 2,000mm, height 2,200mm

geared motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 28 mm -Protection class: IP 44 -Number: 1x motor available Price: per piece -Dimensions: 470/160/H200 mm -Weight: 22 kg

Gear motor, electric motor, three-phase motor -Speeds: 80 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Price: per piece -Number: 12x available -Dimensions: 350/160/ H200 mm -Weight: 10.1 kg

Gear motor, electric motor, electric gear motor -Speed: 120 rpm -Power: 0.25 kW -Diameter: Ø 20 mm -Construction: B3 -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 340/190/H175 mm -Weight: 12.5 kg

Geared motor, electric motor, electric geared motor -Motor power: 0.25 kW -Speed: 25 rpm -Design: B3 -Drive shaft Shaft: Ø 24 mm -Quantity: 1 piece, motor included -Dimensions: 400/175/H215 mm -Weight: 16 kg

Available for sale 1365 kW MWM TBG 620 V16 inside container. Equipment in good working conditions.

Available for sale 1 x 3500 kW MWM TBG 632 V16. Equipment in good working conditions.

Available for sale 1365 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Gear motor, electric motor -Speed: 63 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 10x gear motors available -Price: per piece -Weight: 19 kg

Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 32 rpm -Power: 0.6 kW -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 -Dimensions: 500/250/H280 mm -Weight: 41 kg

Three-phase motor, electric motor -Power: 13/19 kW -Speed: 730/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 670/357/H440 mm -Weight: 198 kg

Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 480/340/H304 mm -Weight: 70 kg

Available for sale 1400 kW MWM TBG 620 V16 K. Equipment in good working conditions.

1992 LECTRA VT5000 in Germany Our LECTRA VT5000 is from 1992. It was fully updated 2004 and we bought it 2013. We have also the CAD pattern and layout programs as well the digitable.

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 32x38 mm -1x holder: Ø 50x45 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -1x: holder suitable for tool changer -Sale: only complete -Weight: 8 kg

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -with CNC pull studs -Sale: only complete -Weight: 8 kg

Available in stock 1 x Used Vicarb Heat Exchanger, model V45. Plates are stainless steel AISI 316. Frames are mild steel, painted. The equipment is used but in good working conditons. REP : 708 kW A MAXI: 165 mm A MINI: 159 mm Dimensions: 50cm x 53cm x 165cm (WxLxH) Weight: 540 kg

Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.

Gear motor, electric motor, three-phase motor -Speed: 80 rpm -Power: 11 kW -Construction: B5 -Shaft diameter: Ø 75 mm -Protection class: IP 44 -Dimensions: 935/700/H520 mm -Weight: 178 kg

Tool holder, milling holder, milling tool -Number: 5x SK45 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 14 kg

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 10 kg

Tool holder, milling tool holder -Number: 21x SK50 recording -various versions -Drill chucks, surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -Price/Sale: complete -Weight: 82 kg