129,247 used machines on RESALE, but how to find them? Machine Search
TECNOVA RECYCLING EXTRUDER for BIO - PE PP ABS PC PS, Barrel with 90 mm screw diam. 37 L/D, Crammed feeding unit, Is working with BIO at 70 rpm yielding 270 kg/h, with PE at 100 rpm yelds 120 kg/h, N.1 degassing point, hydraulic screenchanger, water ring pelletizer from Gamma Meccanica, drying centrifuge, rotating classifier, electric cabinet for omplete management of the line, availability: 4 weeks for reconditioning or 1 week for AS IS, capacity: 120-270 kg/h, conditions: reconditioned, type: 90 mm. crammed feeder for light scraps
TECNOVA RECYCLING EXTRUDER, for PE PP PS PC ABS, Barrel with 130 mm screw 54 L/D, as new screw and barrel, n.2 degassing pumps for slightly moist or heavy prints, hydraulic screenchanger, hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet for complete management of the line, in need of reconditioning, capacity: 500-600 kg/h, conditions: reconditioning needed, type: 130 mm. 54 L/D 2xdegassing points 500-600 kg/h nominal throughput rate
Leda Mattiello Extrusion line 160 mm 50 LD 2 degassing pumps, under refurbishing, ENERGY SAVING IR heaters, for PP PS PE ABS PC, etc., Very good quality extruder, 3 m3 ca. storage silo, crammed vertical screw for light materials with adjustable speed,, extruder with 160 mm. screw, 50 L/D, n.8 Infra Red Petrelli Heaters x 11 kw each V.380 - for great energy saving, 315 kw a.c.Sever drive with inverter (about 60% power used in work), Gefran inverter, n.2 vacuum degassing pumps, semi-automatic screen-changer 320 mm Ø screens (possible configuration with fully automatic scren-changer), horizontal water ring pelletizer - or different, drying centrifuge, closed water cycle, Zambello gearbox with oil recirculating pump, oil-water heat exchanging unit, Control cabinet for managing the whole line including thermoregulators, etc., Nominal throughput rate 800-900 kg./h depending on material., The ...
Description Voltage: 380 V Approximate capacity: 350 L Motor power: 0.37 Kw Loading hopper: No Width: 800 mm Length: 800 mm NEW GEARBOX AND WHEELS.
Description hopper capacity: 170 lt air flow: 150 m3/h temperature range: 50°-140° C power supply: 220 V 3Kw
Description DEGA Dehumidification System with 2 Receivers controlled by a Blower Heating power: 9 Kw Blower power: 2.2 Kw Total installed power: 18 Kw Refined air flow: 250 m3/h Maximum Process Temperature: 150 °C Hopper capacity: Approximately 650 litres
Description Single Phase Suction Unit Voltage: 230 V Approximate Capacity: 10 L
Description Three-phase Suction Unit with receiver. Voltage: 380 V Power: 2.2 Kw Approximate container capacity: 15 L
Description Three-phase Suction Unit with receiver. Voltage: 380 V Power: 2.2 Kw Approximate container capacity: 10 L
Description Three-phase Suction Unit with receiver. Voltage: 380 V Power: 2.2 Kw Approximate container capacity: 10 L
Description Three-phase suction unit with receiver DEGA aspirator: GR 1 Hp92 Voltage: 380 V 50 - 60 Hz Power: 0.7 Kw Approximate container capacity: 10 L
Description Dispenser for printed parts Height on unloading: min. 550 max 750 mm Height on loading: min. 950 max 1190 mm
MARIS TWIN SCREW EXTRUDER, Barrel with 2 x 92 mm screws 40 L/D, n.2 vacuum degassing pumps, co-rotating parallel screws for polyolefines, complete with 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, electric cabinet, The machine is offered as is or reconditioned
Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: DEGA, side channel blower/side channel compressor with filter -Type: 2XHB510H26 -Drive: 1.6 kW -Speed: 2850 rpm -Flow rate: m³/h -Compaction pressure: 200 mbar -Overall dimensions: 570/800/H830 mm -Weight: 57 kg
Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container -Manufacturer: Helios, Drying container granulate dryer type GDM -Dosing system: GDM650-2 -Tank: 1010/770/H600 mm -Individual components: see photos -Quantity: 1 device available -Dimensions: 1170/800/H2780 mm -Weight: 521 kg
GEA Fuellpack vacuum water degassing system / degassing system. Residual oxygen
Inv. Num. : 4567 Type: 300-50 Producer: DEMAT Created: 2016 Parameters: Power consumption: 4.5 kVA Control cabinet / socket cover: IP 54 / IP 44 Length of conveyor: 2400 mm Conveying speed: 2 m/min Belt width: 250 mm Coil window size: 320 x 320 mm Weight: 180 kg
Vacuum water degassing system Manufacturer : GEA/Füllpack Type: ONEX Capacity: 30,000 L/hour, 300 HL/hour Technical specifications : The facility is 2-stage Residual oxygen content
MARIS TWIN SCREW EXTRUDER, Loading hopper for regrinds, Barrel with 2 x 92 mm screws 40 L/D, co-rotating parallel screws for polyolefines, CEAR d.c.motor, N.2 vacuum degassing pumps, 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, Electrical control panel, The machine is offered as is or checked
CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing for ...
maximum number of results exceeded
please refine your search
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
50 € 
