defor used for sale

X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm Basic unit X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg pneumatic Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 electrics Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard General Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 1007 Hardware and software for TEACH IN Safety package 1 Structure of the device with s ...

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

: ERC 53/1 - CL, Robot Built: 1999 Other X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm Basic unit X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg pneumatic Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 electrics Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard General Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 1007 Hardware and software for TEACH IN Sa ...

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...

QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...

The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...

The quasar 2,5 kN is a product with the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typical obtained from static universal testing machines tensile, pressure and bending - cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configu ...

Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...

GABO EPLEXOR® Bench Test Machine Here we offer you a GABO EPLEXOR® bench test machine. GABO EPLEXOR® 500 N Spectroscope 500 N / 1500 N static Dynamic Mechanical Analysis (DMA) EPLEXOR® Measurement of viscoelastic material properties in Dependence of temperature, frequency and mechanical stress EPLEXOR Series Test Systems® enable the mechanical characterization of a wide range of different materials: from elastomers and polymers, to Composites, metals, glasses, ceramic materials, Biomaterials and food, up to adhesives, plastic Masses and liquids. Areas of application are: DMTS/DMTA/DMA Analysis of viscoelastic material properties dynamic material testing dynamic fatigue testing Dynamic component testing Rheology The Method of Dynamic Mechanical Spectroscopy (DMTS/ DMTA or DMA) uses forced, mechanical vibrations for the deformation of the test specimens. The samp ...

Non-contact position measuring system Manufacturer: Dornier Type: I-W-A Anwendungsgebite are: Axial and radial shaft vibration measurements Monitoring of measuring tolerances Determination of deformation and displacement Measurement of wave and eccentricities Roundness measurement Valve position measurement Thickness measurement Accessories: various transducer and mounting plates Evaluation electronics Connection cable Operating instructions Calibration curves Condition: used More info: see also photos All information without guarantee

The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic. Technical parameters: - Maximum internal diameter of the sheet metal coil: 80 mm - Maximum length of the finished product: 3000 mm Technical data : - screen control panel: SIEMENS - maximum length of profiles: 3000 mm - maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm - automatic linear feed - optical sensor for automatic control of the correct length of the part - linear positioning of the hydraulic cylinder stroke - non-deformation perforation technology - the possibility of perforating profiles of various shapes - memory of perforation programs - two-sided perforation (in one operation) and one-sided perforation - automatic lubrication - maximum pressure of the hydraulic press in the line: 147 kN (15 tons) Tool accessories for the INTESO S3130 T punchin ...

Accuracy: 0.7 mm Application: Production and montagelinins, quality control Location: Rüsselsheim The measurement is based on the analysis of surface curvature. The deformation is detected by the detector built into the scanning head. During the measurement, the image of the detector is converted into a point cloud using the control software. Each of the points describes the geometry using X, Y, Z coordinates. The system then enables personalized analysis and reporting. The scanners can also be purchased individually. Visit by appointment. Disassembly, transport and commissioning by specialist company optionally possible.

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

oven 650 Injection Mould Mold furnace temperature range 10 - 650 Celsius 1x1x1m (various possible) Kammertrockenöfen Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen temperaturi te polaganim hlanenjem. Na ovoj povišenoj temperaturi u materijalu nastaju plastične deformacije te se unutarnja naprezanja izjednačuju. Nitriranje je postupak sličan je cemetiranju, gdje se površina dovodi u kontakt sa strujom dušika koji se veže sa željezom te tvori vrlo tvrde kristale željeznog nitrida (Fe4N). Ovako dobiveni površinski sloj vrlo je tvrd i otporan na trošenje. Nitriranjem se povečava dinamička čvrstoćai otpornost prema  ...

Electric spindle press REITZ EHSP100F as laboratory heating press / demonstration machine Laboratory heating press with pressing pressure 40 KN (4 tons), ratio 1 : 16, spindle diameter 45 mm, pitch 8 mm, spindle stroke 0.5 mm per revolution. Gear motor 0.75 KW, 1,500 rpm, 4-pole, with spur gear i = 1:5, Speed 150 mm / min. Max dynamic load 25 kN. With reversible control, emergency stop and motor protection plug. Total weight approx. 100 kg, table surface 600 600 mm, pressing surface approx. 150 250 mm, clear height approx. 60 mm. Base made of high-quality aluminium profiles 4545 mm, the table top is made of glued plywood top. The laboratory heating press has 40 kN pressing pressure (dynamic load). The spindle is self-locking and thus maintains the pressing force for a longer period of time. For an extra charge with heating plate, insulating plate and temperatur ...

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

Oven 450 inner dimensions 2x2x6m PLC Uterna / Europe custom made oven Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfen Haubenöfen Drehherdöfen Thermische Nachverbrennungsanlagen forno a camera per trattamento termico alluminio forno a carro per trattamento termico alluminioforno a carro per trattamento termico alluminio forno a carro per trattamento termico alluminio forno continuo per trattamento termico alluminioforno continuo per trattamento termico alluminio forno continuo per trattamento termico alluminio linea batch per trattamento termico alluminiolinea batch per trattamento termico aliuminio forni industriali da  ...

Material thickness: 42 mm Throat: 8000 mm MACH-id   4419 MAKE        Faccin TYPE          PPM 800 / 8 + MA 120 YEAR         1999 SPECIFICATIONS Controll        Conventionel Throat            8000 mm Maximum sheet thickness Steel        42 mm Power           120 kW DIMENSIONS          Length        10500 mm Width           2500 mm Height          7650 mm Faccin Dishing Press PPM + Manipulator MA 120 Ø 8000 x 800 Ton. The Faccin PPm series of hydraulic presses, guarantee superior forming accuracy and the highest reliability because they are designed with the exclusive hpt systym to mini ...

oven 10 - 1150 Celsius inner 1x1x2m plc auto door various size possible Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammhärten Anlassen / Glühen Bainitisieren Entspannen / Anlassen Anlassofen Aushärteö fen Chargentrockner Drucksinteröfen Durchlauföfen Kipp – Tiegelöfen Laboröfen siehe Lack – Einbrennöfen Lack – Trockenöfen Messing – Glühöfen Muffelöfen Magnesium –Schmelzöfen Ölversorgungsanlagen Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfe n Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce  ...

sheet width: 4000 mm plate thickness: 10 mm distance between columns: 4100 mm no. of strokes: 8 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 300 l cutting angle: 1,8 ° total power requirement: 22,75 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 4,94 x 3,58 x 2,22 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Powder mixing plant Ytron Dr. Karg, built in 2012 and with Flow tank. Capacity up to 10 to/h The powder was treated via pipes into the flow vessel. The whey or milk powder mixture was via the plate heater and hot water Cycle in batch operation with the basic tanks set and then released for further processing. With frame and staircase a.) With a GEA plate heater for treatment the powder water solution. Hersteler FA. GEA TDS GmbH, Sarstedt Type: VT 20 CD-9-C-16 170/7412 No. 3600 4074, year of construction 2012 b.) With wall-mounted control cabinet system Siemens S 7 for process technology, CIP tank system and Control of cleaning paths c.) With 1 CIP system for the standing tank as a 1-tank cleaning system for the Batch operation and for the powder mixing plant Self. Content CIP tanks 15,000 l insulated, deformed inwards in the upper area with valve no ...

Edge chamfering machine make PULLMAX type X 93Machine -No: 70270-06, built in 1982for optimum beveling for perfect weld preparationexact, deformation-free, metallically pure and chemically unaffectedTechnical specifications:Feed rate 1.5 / 3.1 m / minBevel angle 25 - 55 °smallest straight edge 3 mmMax. Sheet thickness 50 mmExternal dimensions 1360 x 1110 x 1510 mmWeight approx 1300 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Furnace 1200 temperature range 100 - 1200 Celsius inner dimensions 1x1x2m power 50kW PLC could be various size industrijskih peći INDUSTIJSKIH PECI NIKOTIRANJE CEMENTIRANJE TERMIČKA OBRADA ČELIKA KALJENJE INDUKCIONO PLAMENO ALATNIH I KONSTR. ČELIKA ŽARENJE MEKO NORMALIZACIONO STABILIZACIONO CNC obradni centri za struganje Završno precizno struganje Brušenje nakon termičke obrade, Zatvaranje tolerancija - lanci mjera, Kombinovani postupci struganja i glodanja, Dijelovi za automobilsku industriju i industriju mašina od čelika obojenih metalą CNC 3-osni obradni centri, Konvencionalno glodanje za pripremu i doradu, Kombinovano CNC struganje i glodanje, Zat varanje tolerancija - lanci mjera, PEĆI ZA TERMIČKU OBRADU ZAŠTITNE ATMOSFERE PEĆI ZA TERMIČKU OBRADU SA ZAŠTITBNOM ATMOSFEROM NITRIRANJE,CEMENTACIJA, POBOLJŠANJA, ŽARENJA, CARBONITRIRANJE NITROKARBURIRANJ ...

4-way comb. Section steel shears make PEDDINGHAUS type Peddimaster 28/40 HMachine -No: 4421050787006Technical specifications:FLAT STEEL SHEARSFlat steel with little deformation up to: 300 x 10 mmor: 250 x 10 mmor: 200 x 11 mmor: 75 x 15 mmKnife cutting length: 300 mmWorking height: 830 mmPROFILE STEEL SHEARSShear cross section max .: 1300 mm²Infinitely adjustable stroke: 10 - 26 mmL-steel 90 ° cut up to: 80 x 8 mmL-steel 45 ° cut up to: 50 x 6 mmRound steel: 29 mmSquare steel: 25 mmWorking height: 1088 mmNOTCHERSquare notcher sheets up to: 8.0 mmL-steel up to: 60 x 6 mmU-steel in the flange: 50 x 25/60/65 mmI-steel in the flange: 80/100 mmNotch width / notch depth: 42/55 mmHOLE PUNCHPunching force: 280 kNInfinitely adjustable stroke: 10 - 26 mmholes with punching table: 27 in 8 mmU-steel in the flange: 65 - 200 mmU-steel / I-steel in the web: 80 - 260 mmPunch projection: 305 mmWorking ...

sheet width: 3000 mm plate thickness: 16 mm distance between columns: 3100 mm no. of strokes: 8 Hub/min table height: 880 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 15 Stück oil volume: 400 l cutting angle: 2,5 ° total power requirement: 37,75 kW weight of the machine ca.: 15,0 t dimensions of the machine ca.: 4,04 x 3,75 x 2,37 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

sheet width: 4000 mm plate thickness: 6 mm distance between columns: 4100 mm no. of strokes: 12 Hub/min table height: 790 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 200 l cutting angle: 1,5 ° total power requirement: 11,75 kW weight of the machine ca.: 10.2 t dimensions of the machine ca.: 5,12 x 3,5 x 1,77 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

sheet width: 300 mm plate thickness: 6 mm distance between columns: 3100 mm no. of strokes: 14 Hub/min table height: 790 mm back stop - adjustable: 1000 mm/mn cutting angle: 1,5 ° column arm: 50 mm lower gears: 15 Stück oil volume: 200 l total power requirement: 11,75 kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 4,11 x 3,48 x 1,77 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...

The shelf stands may no longer be used in the commercial sector due to damage and are therefore sold as spare parts carriers. The deformed shelf stands can serve as a material for various DIY projects. For example, these can be used to build a shed, wooden shelter, but also as a frame for raised garden beds or seating. By combining several deformed shelf stands and attaching partitions or fabrics, they can also be used as creative room dividers in living rooms, offices or warehouses. There are countless ways to use the shelf stands. The scope of delivery includes: 01x Steel beam / shelf stand, used Material color: blue Profile dimensions: approx. 100 x 65 mm Material thickness: approx. 2.50 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) approx. 3,300 mm high approx. 1,100 mm deep Damage: - Transverse and diagonal struts ma ...

: 3,0 mm ST 40 : 2,0 mm VA : 90° Grad blade length: 130 x 130 mm table:: 600 x 460 mm work height max.: 900 mm engine output: pneumatisch weight: 170 kg range L-W-H: 630 x 660 x 1270 mm Characteristics : - Notching with a burr-free cut, without deforming the cut edges - Machine body made of high-quality gray cast iron, base frame made of sheet steel - Cutting knife made of surface-hardened tool steel - Effort-saving work thanks to the pneumatic drive - Operation by means of a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting knife for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglass protective cover - foot pedal - angle gauge - underframe The data for this ad was created with ModulMWS - the sof ...

sheet width: 3100 mm plate thickness: 20 mm distance between columns: 3100 mm no. of strokes: 6-8 Hub/min table height: 880 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 500 l cutting angle: 2,7 ° thickness at Niro-steel: 13 mm rear stop: 200 mm/sec. total power requirement: 37 kW weight of the machine ca.: 23 t dimensions of the machine ca.: 4,15 x 2,49 x 2,6 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created w ...

sheet width: 3000 mm plate thickness: 10 mm distance between columns: 3100 mm no. of strokes: 10 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 15 Stück oil volume: 300 l cutting angle: 1,8 ° total power requirement: 22,75 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: 3,94 x 3,56 x 2,09 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

JUNGHEINRICH TFG 42 forklift built in Germany in 2007, is designed for the fast transport of goods inside and outside warehouses. A deformation-resistant frame characterised by maximum stability, combined with a powerful engine, makes the forklift capable of tackling even the most demanding challenges in all conditions. The machine’s operator’s position, with its adjustable, comfortable seat, provides a high level of driving comfort and excellent all-round visibility. For easy entry and exit from the vehicle, the position is equipped with non-slip handles and steps. The JUNGHEINRICH gas forklift is powered by a four-cylinder engine with liquid gas spark ignition. The engine is protected by two side covers and a wide-opening hatch, which significantly facilitates maintenance operations. To guarantee maximum operational safety, the gas cylinder is mounted in a special holder on the  ...

sheet width: 4000 mm plate thickness: 13 mm distance between columns: 4100 mm no. of strokes: 8 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 400 l cutting angle: 2,3 ° total power requirement: 30,75 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: 4,95 x 3,68 x 2,24 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

sheet width: 3000 mm plate thickness: 13 mm distance between columns: 3100 mm no. of strokes: 8 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 15 Stück oil volume: 400 l cutting angle: 2,3 ° total power requirement: 30,75 kW weight of the machine ca.: 11,2 t dimensions of the machine ca.: 3,95 x 3,64 x 2,10 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

sheet width: 2000 mm plate thickness: 10 mm distance between columns: 2100 mm no. of strokes: 10 Hub/min table height: 820 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 10 Stück oil volume: 200 l cutting angle: 1,8 ° total power requirement: 22,75 kW weight of the machine ca.: 7,8 t dimensions of the machine ca.: 3,2 x 3,45 x 2,03 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

ZREMB GH4 tube bending machine, manufactured in 1983, is used in factories during the precise processing of all varieties of installation tubes. The tube bending is performed in a semi-automatic mode on a cam with the mandrel filling the most deformed section of the tube. The machine comes with a comprehensive range of equipment shown in the accompanying photos. The GH4 mandrel bending machine weighs 2450 kg. The ZREMB tube bending machine consists of: – drive mechanism – mandrel feed mechanism – guiding mechanism – control panel mechanism – hydraulic system – electrical installation assembly – frame assembly Technical specification of the ZREMB GH4 bending machine - tube diameters: 1 ½”; 2″, 2 ½”; 3″, 3 ½”; 4″ - maximum bending angle: 180° - bending capacity (30 bends): 180°/h - head working movement time (180°): 38 s - head return movem ...

GEKA BENDICROP 60 SD ironworker machine was manufactured in 2016 in Spain. Equipped with 5 work stations, the ironworker machine performs precise hole punching, corner cutting, flat bar cutting, as well as bar cutting and bending. The vertical movement of the shears is performed by two adjustable hydraulic cylinders with a central positioned actuator, which guarantees excellent cutting quality throughout the entire life of the machine. The GEKA ironworker machine weights 1750 kg. Technical specifications of the GEKA BENDICROP 60 SD hydraulic ironworker machine General data - maximum press force: 60 t - number of cylinder strokes: 32/min - dimensions (L x W x H): 2010 x 1400 x 2006 mm - weight of machine BENDICROP 60 SD: 1750 kg Hole punching station - maximum bore size (diameter x thickness): ø 40 x 11 mm - throat depth: 500 mm - additional table for hole punching fi 100 ...

sheet width: 200 mm plate thickness: 6 mm distance between columns: 2100 mm no. of strokes: 16 Hub/min table height: 760 mm back stop - adjustable: 1000 mm/mn cutting angle: 1,5 ° column arm: 50 mm down holder: 10 Stück oil volume: 200 l total power requirement: 11,75 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 3,1 x 3,43 x 1,65 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

sheet width: 2500 mm plate thickness: 6 mm distance between columns: 2600 mm no. of strokes: 16 Hub/min table height: 760 mm back stop - adjustable: 1000 mm/mn cutting angle: 1,5 ° column arm: 50 mm lower gears: 13 Stück oil volume: 200 l total power requirement: 11,75 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: 3,6 x 3,43x 1,8 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bihler RM 30 E punch bending machine Bihler RM 30 E punch bending machine for the production of stamped and bent parts made of strip and wire. Compact machine system for the production of precision stamped bent parts User-friendly machine and process control Bihler P CNC 400 Compatibility with RM 35, RM40 and RM4 tools Year of construction 2003 Machine housing and perforated plate Specifications Machine power: 5 - 400 strokes/min Feed length: max. 240 mm Backing edge of the strip: max. 80 mm in front of perforated plate Strip bottom edge: 4 mm above center machine Material dimensions: strip width max. 60 mm, wire Ø max. 4 m Material feeder right (176-05-00195.0) 240 mm feed length Specifications Material trailing edge: 80 mm in front of perforated plate Material bottom edge: 4 mm above center machine Material width: max. 60 mm Feed length: max. 240 mm  ...

Cut-to length slitting machine SM-1250х8 Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. This cut-to-length slitting machine lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are four types of the sheet metal cut-to-length machines we make: The manual cut-to-length slitting machine (cutting for 2 strips) The electric cut-to-length slitting machine (cutting for 3-4 strips) The electric cut-to-length slitting machine (cutting for 6-10 strips) The electric cut-to-length slitting machine (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special scr ...

Key data: 63 t

EUROMET Y41-63T hydraulic press manufactured in 2007 is designed for machining metal sheets, sections and profiles. EUROMET Y41 63T hydraulic press has a monolithic structure resistant to any deformations, which, combined with the 63-ton press force, allows to achieve excellent precision and quality of machining both in medium and large series production. Technical parameters of EUROMET Y41-63T hydraulic press - maximum press force: 63 t - work table dimensions (L x W): 580 x 560 mm - piston rod speed (pressure): 10 mm/s - piston rod speed (return): 95 mm/s - piston rod speed (no load): 38 mm/s - piston rod stroke: 500 mm - maximum piston rod feed: 800 mm - power: 7.5 kW

New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm

Machine for the completion of insulation strip assembly Manufacturer: Aluro Type: BTM 100908-190 Year of construction: 2005 Location: Zweibrücken - Roll-in below 90° in 1 pass - Separately adjustable retaining castors - 4x2 horizontal retaining castors at the top and bottom with Vulkollan coated surfaces - Correction for the straight alignment of the profiles - Stop with safety switch - Display of position and pressure with display, correction of mechanical deformation after roll-in We will be happy to send you further information on request.

Key data: 1180 °C

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

Key data: 500 mm, 200 mm

JANUS HTC2050 CNC lathe was built in Poland in 2010. The machine, characterised by high stability and operational reliability, uses the necessary equipment for high-speed and finishing machining, allowing for precise machining of internal holes, columns, cones, arches and all types of screw threads. The machine uses a high-speed spindle with infinitely variable rotation speed from 40 to 4000 rpm and a bed inclined by 45°, which facilitates chip removal and increases the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings simultaneously transfer radial and axial loads, ensuring low spindle temperature rise and less thermal deformation during high-speed finishing. The JANUS lathe equipment includes a state-of-the-art FANUC Series 0i Mate-TC CNC controller, a chip conveyor and the tools shown in the photos. The total weight of th ...

CNC machining center including laser edge type BIMA / Gx50 / E / 160 / 630 Specifications: IMA gantry machine in real GANTRY design Processing area: • Length in X direction with all aggregates (mm): 6300 • Width in Y-direction with all aggregates (mm): 1600 • Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the maximum workpiece thickness depends on equipment/application • Length in X direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm • Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm • Width in Y-direction with edging (mm): 1600 • Length in X-direction Single user processing without gluing (mm): 2 x 3050 • Length in X-direction free space center (mm): 200 • Length in X-direction Single user processing with gluing (mm): 2 x 2 ...

: gebraucht : 2021 : 9648 : prompt, Zwischenverkauf v : Spanien : 15900 € : 1 : 60 to : 250 mm : 5 : 40 x 11 mm : 32 1/min : 350 x 15 mm : 120 x 10 mm : 45 / 40 mm : 10 mm : max. 150x10 mm : 5 kW : 2100 mm : 1400 mm : 1600 mm : 1390 kg DEMO MACHINE with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release User Manual in german + CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,50 mm blade length: 150 x 150 mm table:: 457 x 305 mm cutting angle: 90 ° adjustment of stroke: 20,0 mm weight: 73,0 kg range L-W-H: 460 x 630 x 1150 mm - Notching with a burr-free cut, without deformation of the cut edges - For punching out corners, shapes, etc. up to a maximum of 150 x 150 mm - Body made of high-quality gray cast iron for precise work - Blades made of surface-hardened tool steel Furnishing: - manual notching machine - 2x material stops - Scales support tables - hand lever The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.