128,847 used machines on RESALE, but how to find them? Machine Search
Height=0.85 m, Overall length= 0.7 m, Overall width= 0.7 m,
A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
Height=1.1 m, Overall length= 0.777 m, Overall width= 1.244 m, Net weight= 180 kg,
FAMAR THERMOFORMER, MODEL RM150 Thermoformer for the packaging of various products (tablets, soft or hard capsules, dragees, ampoules). Technical documentation available. Incoterm: EXW PRODUCTION Output: up to 100 blisters/min Film material: alu, paper, PVC Max reel width: 140 mm Max diameter of the thermoformable material reel: 400 mm Max diameter of the covering material reel: 200 mm Max forming depth: 15 mm Spacing: from 50 to 150 mm OTHER CHARACTERISTICS Machine size: 4460 x 1080 x 2260 mm Weight: 2000 kg ENERGY CONSUMPTION Power supply: 380 V + ground / 50 Hz; Absorbed power: 9 kW; Compressed air consumption: 200 l/mn
2005 Multivac R 240, hard and soft film, film width 355 mm, take-off 200 mm, sandwich preheating, stamps heated, MAP, MC 96-2 control, upper stroke at mould and sealing station, soft and hard film cutting, outfeed belt and residual film rewinder, central lubrication, automatic chain lubrication. Top condition-ready for use.
Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible.
2 pieces Ice Cream Chest/Ice Cream Sales Chest/Ice Cream Chest/Freezer Used External dimensions W: 190xD:1100 H:140cm with round glass lid with lighting with rear storage compartment 2 doors not cleaned front lower fairing is missing
Used automatic thermoforming machine for butter packaging from TMCI Padovan type FM80-8 H.C. Packages of 10 grams and 125 grams.
film width: 470 mm, equipped with SKIN function, equipped with touch panel, 2 residual film rewinders, pushover vacuum cleaner and other accessories Auction-ID: A1-43573-203
film width: 362mm, equipped with 2 residual film wrappers, 1 SIENS SIMATIC TP27 touchscreen Auction-ID: A1-43573-204
equipped with touch panel and pallet with accessories Auction-ID: A1-43573-205
IN WORKING CONDITION. TESTED FOR FUNCTION. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-44605-96
A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026.
Bio-Rad Reaction Module 96W Deep Auction-ID: A7-45427-107
Used Multivac packer type R 530. Year of manufacture 2007. 400V, 50Hz, phases 3+N, power 20.5 kW, current 47A. Bottom foil, hard width: 450mm, thickness: 400um Top foil soft width 450 mm, thickness 88um Included : Spare sealing plate, seal for the sealing mold, inserts for changing the depth of the extruded film, basic set of spare parts, manufacturer's documentation and user manual, templates for inserting the product, traverse for printing on packaging from a Hitachi printer, spare cutting die cut sharpened by Multivac packed in a box. Capacity 10 beats per minute (8 pieces per cycle)
New unused This 12 volt 85 ah Varta LAD85 AGM Deep Cycle battery has the latest technology and is therefore the suitable battery for the latest boats, yachts, campers, caravans and electric outboard motors. The battery is also ideal for seasonal use, so you don't need to charge it extra when you take your boat or motorhome out of storage in winter. In addition, it is also extremely suitable for Dual Power and can therefore be used for starting and for the power supply of the electrical consumers. The LAD is perfect as: light battery, on-board battery, service battery, leisure battery and anything else that consumes more power and of course also as a starter battery. Due to the low internal resistance, the battery is charged faster and it ensures that high power can be extracted from the battery for a long time. The LAD 85 incorporates state-of-the-art battery technology and has up to 8 ...
Power: 22 HP, 2880 min-1 EMB electric motors AG Switzerland Stainless steel housing Hopper with feeding screw Dimensions: LWH = 400x400x1300mm (without screw) Weight: 300 kg
pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pneumatically driven punching, Horizontally arranged. Pedicure Manufacturer: Meuleman Engineering BV Vosseboerweg 7 7683 SH Den Ham (Ov) Punching force 200kg Special price
Mechanical punch with a punching force of 1000kN. tool holder for stamps up to 90 mm can be mounted on request. A wide range of stamps and dies is included in the scope of delivery.
Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices
Key data: 65 t, 57 mm, 305 mm
METALLKRAFT Profile steel shears / hole punch HPS 65 DS Combined hydraulic profile steel shear and hole punch with punch, notching station and flat steel, angle steel and profile steel shear - for simultaneous work on punch and profile steel shear Punching station - Punching pressure: 65 t - Punching capacity: max Ø 26 x 20 / Ø 57 x 10 mm - Projection: 305 mm - Stroke: max. 55 mm - Number of strokes: 25 strokes/min - Working height: 900 mm Steel bar shears - Round cutting capacity: max. Ø 45 mm - Square cutting capacity: max. 45 x 45 mm - Angle steel shears - Cutting capacity L-profile 90°: 120 x 120 x 12 mm - Cutting capacity L-profile 45°: 70 x 10 mm - Cutting capacity U-I profile: 120 x 58 mm - T-profile cutting capacity: 90 x 11 mm - Working height: 1,140 mm Flat steel shears - Cutting capacity 90°: max. 300 x 20 / 375 x 15 mm - Angle cut 45°: max. ...
Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.
In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 500 mm stroke: 60 mm : 38 /min. engine output: 5 kW weight of the machine ca.: 1.150 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Flange bearing -Bore: Ø 100 mm -Mounting hole: Ø 26 mm -Dimensions: 264/264/H60 mm -Weight: 11.4 kg
pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 750 mm stroke: 60 mm : 38 Hub/min engine output: 5 kW weight of the machine ca.: 1.885 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 500 kN hole diameter in sheet thickness: Ø 27 in 13 / Ø 28 in 10 mm no. of strokes: 23 Hub/min throat: 130 mm stroke: 30 mm total power requirement: 3 kW weight of the machine ca.: 295 kg Overall size: 1100x900x1550 mm Standard equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: drill holes -Width: 395 mm -Length: 495 mm -Height: 30 mm -Weight: 53.5 kg
Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: holes -Width: 400 mm -Length: 500 mm -Height: 30 mm -Weight: 45 kg
Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes: from a CNC machining center -Width: 440 mm -Length: 400 mm -with: support ribs -with: instep index -Number: 2x plates available -Price: per piece -Weight: 74 kg
Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg
T-slot plate, clamping plate with holes, plate field, welding table, welding table -Dimensions: 3012/2010/H710 mm -Panel thickness: 82 mm -Plate: with supporting ribs -Weight: 3370 kg
Clamping plate, plate field, welding table, welding table, plate boring machine, surface plate, -with: holes -Width: 1000 mm -Length: 1000 mm -External height: 150 mm, panel thickness 100 mm -Number: 7x plates available -Price: per piece -Weight: 720 kg/piece
Flange bearing 4-hole -Bore: 35mm -Outside: Ø 135 mm -Price: per piece -Quantity: 1x available -Weight: 1.2 kg
2-hole flange bearing -Type: 01CJT05 -Designation/Type: Flange bearing unit -d = Inside: 25 Price: per piece -Number: 71x available -Weight: 0.6 kg/piece
Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Table surface: 995 x 197 mm, height 995 mm -Wall thickness: 39 mm -Bores: M20 -Clamping grooves: 172 x 21 mm -Dimensions: 995/197 / H995 mm -Weight: 160 kg
Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg
Flange bearing, housing bearing, flange bearing unit -Manufacturer: PTI, flange bearing unit type FWS40U -Bore: Ø 40 mm -Mounting hole: hole spacing 102 x 14 mm -Number: 3x flange bearing available -Price per piece -Dimensions: 128/128/H50 mm -Weight: 2.2 kg/pc.
Specifications: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm 2 x 68 , 2 x 80 , 81 , 85 mm - Long hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Stamp holder 58 mm - Stamp height 54 + 58 mm - Adapter ring for stamps - Die height 30 + 40 mm - Die outer diameter 90 + 140 mm - Adapter ring for matrices 90 - 140 mm - Weight approx. 90 kg
Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm -Weight: 6.8 kg
Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg
Offer here a post Cewe stand units partly still packed in all paper and unused partly already used or not quite complete anymore the tools have not been used for a bit longer but still in the functional state retail sale possible
Clamping plate, welding table, welding table, marking plate -Width: 450 mm -Length: 400 mm -Height: 50 -with fitting bore and threaded holes: M12 (threaded insert M16 x 1.5) -Weight: 60 kg
Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes from a CNC machining center MAHO type MCV 600 -Width: 500 mm -Length: 500 mm -with supporting ribs -with Span Index -Weight: 115 kg
Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,
maximum number of results exceeded
please refine your search
1.000 € 
