deep hole drill used for sale

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 0 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark T ...

Load Weight Shelf: 15000 kg Loading weight per level: 3000 kg Number of load levels: 5 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 30000 kg Loading weight per level: 3000 kg Number of load levels: 2 x 5 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 700 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 15 / 18 mm throat: 180 mm bore stroke: 80 mm turning speeds: 200 - 4000 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 1,1 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 250 mm bore stroke: 130 mm spindle taper MT: 3 MK table:: 380 x 380 mm column diameter: 98 mm turning speeds: 75 - 3200 U/min feeds: mm/U total power requirement: 1,1 kW weight of the machine ca.: 220 kg. range L-W-H: 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 290 x 270 mm column diameter: 92 mm turning speeds: 150 - 2450 U/min feeds: 0 mm/U total power requirement: 1,1 kW weight of the machine ca.: 95 kg range L-W-H: 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK 3 spindle turning speed range: 50 - 3000 U/min : 280 mm : 155 mm table surface area: 500 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,8 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 245 mm bore stroke: 120 mm weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1.6 x 1.5 x 2.4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25170 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Level 3 120 - 420 rpm - Level 4: 420 - 1530 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance machined base plate - drilling spindle 1250 mm - Coolant device -Lighting - Machine vise - div. 10 pcs HSS - Drill - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Paper drill Hang 106DTK4, machine number 62407, in good condition, immediately available

bore capacity in steel (diameter): 18 mm throat: 225 mm bore stroke: 110 mm table-size: 430x345 mm spindle turning speed - stepless: 135-4500 U/min Digital read-out Tapping attachment Cross table 530x255mm Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 2200 mm y-travel: 1600 mm z-travel: 1600 mm spindle turning speed range: 35 - 3000 U/min spindle drive motor: 18,5 / 15 kW spindle taper ISO: 50 w-axis: 500 mm table surface area: 1250 x 1500 mm Table load: 5000 kg T-slot - width: 22 H8 B-axis (table): 0,001 ° Control: FANUC 31i-B Rapid Travel X / Y / Z-Achse: 12 m/min total power requirement: 50 kVA weight of the machine ca.: 21,5 t dimensions of the machine ca.: 7,8 x 4,8 x 3,7 m Assembly 2018 - CNC control FANUC 31i-B - Tool changer 60-fold (ISO 50) - Coolant system with IKZ 20bar - Chip conveyor - Renishaw OMP 60 - Universal milling head - Angled table (2) - CE only approx. 800h running hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle diameter 135 mm Morse 6 Attachment Cone Max. drilling depth in 1 pass 600 mm Min. distance spindle-column axis 485 mm Max. distance between spindle and mast axis 3,500 mm Min. distance from spindle to table 520 mm Max. distance from spindle to table 1,845 Min distance from spindle to plate - base 1,130 mm Max. distance from spindle to plate - base 2,455 mm Min drilling radius from column axis 820 mm Max. drilling radius from column axis 3,875 mm Max. drilling diameter 78 mm stroke 8,000mm stolle top 10.000X2.500mm

bore capacity in steel (diameter): 40 mm throat: 325 mm bore stroke: 170 mm table surface area: 730 x 590 mm 0: 130 - 1200 U/min feed: 0,09 - 0,16 - 0,28 mm/U tool taper: MK 4 total power requirement: 1,8 kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,8 x 2,15 m Drill with: Feed 2 gears Left/right rotation Foot switch Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paper drill Nagel Citoborma 490, machine number 41648, 4 drill heads, functional, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Bdobr Sbevr U Rve Nwkjc You are welcome to visit the machine in our house by prior appointment.

x-travel: 11500 mm y-travel: 4500 mm spindle diameter: 200 mm w-axis: 1600 mm z-axis: 2000 mm Rotary table: 3000 x 4000 mm tool adaptor: 80 t bed length: 4600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m incl. 15 plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm arm length: 1000 mm workpiece height max.: - mm total power requirement: 5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,4 x 1,2 x 3 m Vertical movement not functional No. 4656 Radial drilling machine MK 4 make OOYA, type RE 2 - 1300 A Year of manufacture 1978 Working area: MK 4 x 1000 x 660 mm Spindle holder MK 4 Speed range 32 - 1655 min-1 ( 50 Hz ) Space requirement approx. 1.2 x 2.4 m Weight approx. 3 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

Manufacturer: ATLAS COPROD Model: ROC - L7(40) CR Year of Manufacture: 2008 Engine Hours (Old engine) : 8,043 - New reconditioned engine was installed recently. Find more here - .ucymachines/ Contact us at - sales@ucymachines

High: 2.900 mm, Long: 2.200 mm, Speed: 22.4 / 2.800 r.p.m., Width: 900 mm, Weight: 2.350 kg, Voltage: 220 / 380V, Ø column: 300 mm, Ø spindle: 80 mm, Total power: 5.3 kW, Spindle displacement: 360 mm, Surface of the table: 1,300 x 750 mm, Do not. drill spindle speeds: 15, Advances min / max spindle chuck: 0.032 / 1.5, Number of drill spindle advances: 12, Max. distance spindle axis column: 1.200 mm, Maximum distance table to spindle: 1.100 mm, Minimum distance table to spindle: 750 mm, Specification: Radial

Tall: 2.217 mm, Weight: 440 Kg, Width: 480 mm, Long: 755 mm, Voltage: 220/380 V, Spindle cone: MORSE 3, Total power: 1,10 CV, Base width: 480 mm, Base length: 755 mm, Ø of the column: 150 mm, Transmission type: Gearbox, Ø max. drill steel: 25 mm, Shoulder of spindle column: 320 mm, Spindle motor power: 1 Cv, Ø maximum threaded in steel: M 30, Spindle travel: 180 mm, Motor power cooling: 0,10 Cv, Max spindle column axis distance: 320 mm, Table tilt angle: YES, Maximum distance from table to spindle: 846 mm, Minimum distance from the table to the spindle: 60 mm, Spindle speed range: 8, Minimum/maximum spindle speed: 134/970 rpm, Specification: Column

bore capacity in steel (diameter): 55 mm arm length: 2005 mm workpiece height max.: 1500 mm table-size: 1500 x 800 mm spindle taper MT: 5 spindle turning speed range: 30-1200 U/min feed range: 0,06 - 1,0 mm/U crossrail adjustment horizontal: 495 - 2.000 mm crossrail adjustment vertical: 505 - 1670 mm spindle stroke: 310 mm column diameter: 360 mm distance spindle/base plate: 825 - 1670 mm power requirement: 4,4 kW voltage: 400 V total power requirement: 7,2 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,00 x 0,80 x 2,80 m - Pole-changing motor with 2 speeds - right / left rotation - machine light - Cube table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 Spindle Paper Drilling Machine

• Manufacturer: Hang (Constantin Hang GmbH) • Model: DT 106 (also known as 106 DT) • Machine Type: Paper Drilling Machine / Paper Punching Machine • Drilling spindles: 2 pieces, adjustable • Drilling diameter: 3 – 20 mm (standard up to 14 mm, optionally with hollow shank up to 20 mm) • Table size: approx. 110 × 68 cm (width × depth) • Max. drilling distance from the edge of the paper: up to 470 mm (face hole approx. 300 mm) • Max. stacking height: approx. 70 mm • Operation: Foot pedal (electric) • Connection: 380–400 V three-phase (3-phase) • Machine weight: approx. 250 kg • Condition: Used, technically checked, ready for immediate use

Radial Drilling Machine Z3050 x 16 I Spindle: Ø 80 mm Spindle exit: 300 mm Spindle speed: from 25 to 2000 RPM Arm travel: 1600 mm Year of construction: 1990 Column diameter: Ø 320 mm Maxi distance spindle nose/table: 1800 mm Mini distance spindle nose/table: 1200 mm Table useful dimensions: 1700 x 1000 mm Tailstock CM5 Hydraulic clamping trolley + arm + column Auto advance non-functional Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2400 x 1200 x 3200 mm Weight: approx 4 T

Manufacturer: Central Mine Equipment Model: 75 Year of Manufacture: 1972 Type of Machine : drill for geotechnics Km Count : 165208 kilometers Find more here - .ucymachines/ Contact us at - sales@ucymachines

bore capacity in steel (diameter): 35 mm throat: 320 mm bore stroke: 160 mm no. of turning speeds: stufenlos Stufen spindle turning speed range: 65 - 460 / 460 - 3250 U/min feeds: 0,1 - 0,2 - 0,3 mm/U spindle taper: MK 4 table surface area: 500 x 420 mm base plate: 650 x 450 mm Distance spindle/table max.: 500 mm column diameter: 120 mm distance spindle/base plate: 1100 mm Total height: 2200 mm voltage: 400 V / 50 Hz drive motor: 1,5 kW coolant pump drive: 0,2 kW total power requirement: 1,7 kW weight of the machine ca.: 0,550 t dimensions of the machine ca.: 0,6 x 0,8 x 2,2 m Industrial, gear-driven drilling machine, with coolant device, adjustable drilling depth, left-hand and right-hand rotation of the spindle, motor with 2 speeds, work light, table can be rotated and tilted, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column Drilling Machine PRECIS Ø 23 mm Cone CM2 Maxi diameter: Ø 23 mm Rotation: from 165 to 4400 RPM Table size: 390 x 190 mm Spindle travel: 100 mm Column diameter: Ø 120 mm Throat depth: 240 mm 2 speed motor Mini chuck/table height: 100 mm Maxi chuck/table height: 350 mm Manual descent Manual hydraulic lifting of the table Voltage: 380 V Width: 700 mm Depth: 1000 mm Total height: 1800 mm Weight: approx 800 kg

Offer 24190 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 140 mm - 8 drilling spindle speeds 100 - 2900 rpm - Min. / max. distance drilling spindle / table 110 / 405 mm -Lighting - Keyless chuck - Coolant device - Machine vise - Machine base - Drive 400 V / 0.75 kW - Space required: W 400 x H 1250 x D 600 mm - Weight approx. 200 kg

Quick-opening milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000speed max. 15000 rpm at 70% EDratio ratio 1:5Power transmission up to approx. 2.5 kWProduct dimension 110 mm (machine spindle to clamping nutTool holder MK4 with tightening thread M16Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mmWeight 6.5 kgGood condition; used

Table, Drilling and Tapping Machine IXION Type BT 15 GLMasch. No. Year of construction approx. 1975Drilling capacity 15 mmSpindle holder Cone holder B 16Threading from M 2.5 to M10Throat depth 200 mmPine stroke 90 mmTable size 285 x 220 mmColumn diameter 75 mmSpindle speed 320 - 1600 rpm. 4 stagesMotor power 0.55 kWNet connection 380 volts, 50 Hz- Spindle speed via 4 V-belt steps- equipped with FAHRION GH 10 tapping chuck- with guide cartridge for the thread pitch, operation without

Manufacturer: FRAVIZEL Model: Zenith MFFR90 Year of Manufacture: 2022 Commissioned: 2023 Type of Machine : Drilling Rig Condition: The machines is relatively new and have seen little use. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Olive and pot belt drilling machine Ganner for windows Type 370 Machine No. 190469 Built in 1994 Combined Corner Bearing and Olive Drilling Machine Drill head with 3 drill bits Motor power 0.75 kW 2800 rpm Compressed air connection 5 – 7 bar Suction nozzle diameter 100 mm Well functioning condition Dimensions approx. 2700 x 900 x 1400 mm Weight approx. 250 kg

Qty. 1 Second-hand lathe CNC machine Manufacturer: VERNET BEHRINGER Machine type: FG 2005 CNC Definition: Sheet metal drilling line Year of construction: 2012 Voltage supply: 380 V, 3 ph., 50 Hz, Ground Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar Oil volume: ≈120 liters Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm & 1340 x 1000 x 60 mm

A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.

Offer 25251 Specifications: - Drilling capacity in steel ST 60 45 mm - Drilling capacity in steel ST 60 55 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - Right - Counterclockwise rotation - 3 Feeds electr. Magnetic indentation 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max distance drilling spindle – table / base plate 775 / 1255 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 2.7 / 4.0 kW - Space requirement approx. W 800 x H 2100 x D 980 mm - Weight approx. 750 kg - with: - Machine vise - Keyless chuck 1 - 13 mm - Emergency stop button -Lighting

bore capacity in steel (diameter): mm throat: 290 mm bore stroke: 180 mm total power requirement: 1,9 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2500 mm y-travel: 2500 mm z-travel: 1700 mm control: Siemens Sinumerik 840 D max. workpiece weight: 6000 kg spindle diameter: 130 mm quill stroke: 700 mm tool taper: ISO 50 DIN 69871 - AD max. torque at the spindle: 1847 Nm total power requirement: 65 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 10,9 x 9,3 x 5,7 m Work table -Clamping surface 2500 x 2000 mm -Table height above floor 800 mm Feed speed -x-axis 0.5 to 10000 mm/min -y-axis 0.5 to 10000 mm/min -Z-axis 0.5 to 10,000 mm/min -Rapid traverse (x/y/z) 25 / 25 / 25 m/min -Max. feed force (x/y/z) 28,000 / 27,000 / 28,000 N Spindle speeds in rpm -Gear stage 1: 6 to 1004 rpm -Gear stage 2: 950 to 4000 rpm Equipment/accessories: -Approx. 30 SK 50 tool holders -1 measuring probe -Coolant system/paper belt filter & chip conveyor -Cooler -Oil mist extraction -Fixators -Technic ...

bore capacity in steel (diameter): 32 mm throat: 290 mm bore stroke: 180 mm total power requirement: 1,9 kW weight of the machine ca.: t dimensions of the machine ca.: m Description to follow! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Follow asap 04.1.189

Column Drilling Machine FLOTT type 16 STG/R2 Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Width: 500 mm Depth800 mm Total height: 1100 mm Weight: approx 150 kg

TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

TOYOSK 01C550T Fixed Spindle Pitch 48 Spindle Tapping Machine Year of Manufacture: 1984 Speed ​​(3 stages): 450 / 700 / 1100 rpm Speed ​​Change: Mechanical (stepped stages) Spindles: 48pcs Tool Holder Type: Spring/Clamp Chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)