We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,198 used machines on RESALE, but how to find them? Machine Search
used
material width:450 mm material thickness:1,0 - 14,0 mm coil weight:10,0 t coil internal diameter:470 - 520 mm coil external diameter:1100 - 2000 mm no. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mm number of draw-in rolls:2 inlet roll diameter:160 mm min. material width:100 mm speed:15 m/min power requirement:75,0 kW weight of decoiler:6,4 t weight of straightening machine:12,8 t dimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mm straightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450
used
material width: 350 mm coil weight: 500 kg material thickness: mm coil external diameter: 1000 mm no. of straightening rolls: 9 straightening roll diameter: 45 mm speed: m/min power requirement: 9 kW Weight: - t Dimensions (WxDxH): - m Decoiler and straightener on one base plate - Straightening machine - decoiler - Control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
material width:250 mm coil weight:2,5 t coil internal diameter:430 - 520 mm coil external diameter:1650 mm material thickness:0,5-6 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 weight straightener:1,2 t weight decoiler:1,4 t dimensions straightener (WxDxH):1,2 x 1,2 x 2,0 m dimensions decoiler (WxDxH):1,8 x 1,8 x 2,3 m expansion:hydraulic
used
Decoiler with straightening machine Passage max. 200 mm width Sheet thickness 0.5 to 2.8 mm Speed 5 to 30 m/min (variator)
used
Line consists out of: 1 - Double head decoiler: - cap: 25 ton - max length of coil: 2 meter - max diameter of coil: 3 meter 2 - Pre-leveller/straightening + edge slitting unit - 2 slitting heads are movable to slit the edges of the sheet - variable from 400 to 2000 mm wide 3 - Ungerer leveller/straightening unit - 6 + 7 rolls - for fine levelling/straightening - max thickness: 4 mm 4 - Schröder shear - max cap: 2050 mm - max thickness: 4 mm 5 - feed-out table + sheet storage Workwidth x sheetthickness: 2050 x 4 mm Straightner: yes Shear: yes
used
sheet width: mm coil weight: 4 t coil internal dia.: mm material width: 300 mm material thickness: 0,4 - 2,0 mm total power requirement: 8,5 kW weight of the machine ca.: t dimensions of the machine ca.: m Conveyor system consisting of: ALBA decoiler EHA-4-300 and elec.-hydr. Leveler RMS EM 2/6-120/45-300 B, year of manufacture 99 coiler: bundle weight 4000 kg, coil inside diameter 460-620 mm, External coil diameter 1600, dimensions 1500x1140x2300 mm, weight approx. 2000kg Straightening machine: feed rollers number 2 - diameter 120 mm, straightening rollers number 6 - diameter 45 mm, center distance 80 mm, take-off speed 5-20 m/ min, Deduction height above floor 1500 mm, dimensions 1100x740x1800 mm, weightapprox. 600 kg ARKU roll feed, Servomaster 300, year 94 passage width 300 mm, roller diameter 100 mm, max. cross-section 1000 mm², Material thickness 0.1-5mm, feed accuracy better than ...
used
material width:500 mm coil weight:2 x 2,0 t material thickness:1,0 - 6,0 mm coil internal diameter:350 - 420 mm coil external diameter:1600 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 speed:0 - 40 m/min material thickness at 500 mm material width:3,5 mm power requirement:17,5 kW Dimensions (WxDxH):2,3 x 4,2 x 2,4 m straightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter
used
material width:800 mm coil weight:12,0 t coil internal diameter:470 - 520 mm coil external diameter:1500 mm material thickness:0,4 - 2,5 mm no. of straightening rolls:8 straightening roll diameter:53 mm number of draw-in rolls:2 inlet roll diameter:160 mm speed:35 m/min material thickness at 150 mm material width:2,5 mm material thickness at 650 mm material width:1,5 mm material thickness at 800 mm material width:1,0 mm straightening machine:RM 8-53/160-800 decoiler:HE 200-1000
used
material width coil line:600 mm coil weight in kg:2 x 3000 kg coil internal diameter:460 - 630 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm Number of Straightening rolls:9 roll diameter:30 mm material cross-cut:1200 mm² weight:9,5 t Dimensions (WxDxH):4,3 x 2,6 x 2,6 m straightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven
used
Technical data: -Weight of coil: to 3. -Strip width: 600 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. Coil outer diameter. 1500 mm
used
Capacity 10 tons Maximum band width 180 cm Pressure roller, etc. Complete documentation more info on request
new
Technical data: -Coil weight: 3.000 kg -Strip width: 1,000 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. -Coil outer diameter. 1500 mm
used
Capacity 20 kN, band width 500 mm, coil inner diameter 445-530 mm Coil outer diameter 1300-1400 mm Drive power 1.1 kW Rolling speed 16 U/min Manual spreading of the reel Crown with hydraulic unit complete documentation, operating instructions and manual
used
Loading capacity: max. 300 Kg. Coil outsite diam.: max. 1.000 mm Coil inside diam. 240 - 560 mm Coil width: max. 180 mm; good
used
Loading capacity: max. 2.000 mm Coil Inside diam. max. 1.000 mm Coil Outside diam. max. 1.200 mm Coil width: max. 500 mm
used
Loading capacity: max. 2.000 Kg. Coil Inside diam. max. 1.000 mm Coil Outside diam. max. 1.200 mm Coil width: max. 500 mm; ready for operation
used
Material width: 0300 mm Coil weight: 0.5 t Coil inner diameter: 270-360 mm Coil outside diameter: 1000 mm Speed: m/min Weight: 0,4 t JAWS: 200 mm extension of the diameter
used
Federal load - 1500 kg Federal width - 500 mm Outer diameter - Max 1250 mm Spreader range without attachment segments 310-460 mm, 410-560 mm High of lateral ditches. Strip lines approx. 470 mm Bc9eg37hb2 Speed of the reel shaft - 16 U / min, power 0,55 kW Manual spreading, adjustable -Torque limiter, soft start, - band drain brake -with push segments -hydraulically actuated process equipment â completely. Hydraulic unit mass - L 3300 B 1500 H 1500 mm
used
Key data: 300 , 1 , 1300
Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control
used
Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton
used
Coil weight: 2 x 500 kg Material width: 300 mm Coil exterior diameter: 1200 mm Expansion range: 350 - 610 mm Weight of machine approx.: 2,2 ton
used
Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton
used
• Bandwidth / strip width: 1,600 mm • Strip thickness / strip thickness: 0.4 - 2.0 mm • Coil inner / coil inner-a:390-420 mm • Coil outer / coil outer-a: 1,500 mm • Spreading/ spreading: hydraulic/hydraulic • Motor drive AC servo cooling • For invertrers • Speed: 15 m/min. • Attachment segments for 500 mm • Reel shift: 200 mm • Working method: from top and bottom • Hydraulic valves on board
used
Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg
used
There are two identical machines available, band thickness: 0.1-4mm, band width: 10-150mm, weight: 100kg, year of construction machine 1/ 2: 2000/ 2006.
new
Load capacity - 1000 kg Outer diameter - max. 1200 mm Spreading range 550 - 750 mm Bandwidth max. 350 mm Spreading process - manual Reel drive - three-phase motor 400 V / 50 Hz Unwindspeed max. 30 m / min
used
Coil weight: 0 kg Material width: 0 mm Coil diameter maximum: 0 mm Technical data Max. loading capacity: 2X200 kg Voltage 50 Hz 3x: 230 Volt Driving motor (motor power): 0.74 kW Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1700 mm
used
Coil inner diameter 460 - 560 mm Coil outer diameter. Max. - 1500 mm Bandwidth - 350 mm Payload 2 t without drive, adjustable. Disc brake btto - 640 kg more info on request
used
material width:320 mm coil weight:2,6 t material thickness:0,5 - 2,0 mm coil internal diameter:400 - 510 mm coil external diameter:1200 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 band speed:0 - 30 m/min power capacity:1,5 kW weight:1,5 t
used
material width:300 mm coil weight:0,5 t material thickness:0,4 - 3,0 mm coil internal diameter:420 - 520 mm coil external diameter:1200 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:50 mm power requirement:1,5 kW weight:1,55 t dimensions (WxDxH):2,5 x 1,2 x 1,8 m
used
YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request
used
Key data: 450 , 1 , 1400
Payload 1200 kg Width 450 mm Coil external diameter - up to 1400 mm Motor 1.5 kW Speed adjustable by frequency conversion Btto 500 kg
used
Load capacity 20 kN, strip width 450 mm, Coil inner diameter 445-530 mm Coil outer diameter 1400 mm Drive power 1.5 kW Rolling speed CONTROLLABLE with frequency converter Danfoss VLT 2800 Manual spreading of the reel crown Btto 600 kg
used
Key data: 500 , 1 , 1450
Width 500 mm Load capacity 1500 kg coil outer diameter 1450 mm Spread 370- 630 mm Motor 1.1 kW Btto 400 kg
used
used
used
Double reel 2 x 2500 kg Bandwidth - up to 350 mm
used
max. coil weight - 2000 kg Belt width 500 mm Coil external dimension - cca 1400 mm Pneumat. Pinch roller
used
Equipment consists out of: 1 - Three decoilers 2 - Sheetholder with three levels 3 - Fasti straightening unit 4 - Fasti shear Transversal cut to length line / Querteilanlage / installation de coupe en longueur
new
: neu : 2023 : 7287 : ca. 2 Wochen ab Auftragse : Türkei : 4600 € : 1 : 500 kg : 1200 mm : 470 mm : 520 mm : 300 mm : 50 mm : 0,55 kW : 1400 mm : 1200 mm : 1550 mm : 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 11200 € : 231.84 € : 2500 kg : 1300 mm : 450 - 550 mm : 50 - 600 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: Pneumatic downholder (CMC P3 2500 600 M D1300) € 2.100,-- BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 15200 € : 314.64 € : 4000 kg : 1300 mm : 450 - 550 mm : 50 - 600 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumatic downholder(CMC P3 4000 600 M D1300) € 2.200,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 7100 € : 148.39 € : 1250 kg : 1300 mm : 450 - 550 mm : 50 - 400 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumaticdownholder (CMC P3 1250 400 M D1300) € 2.200,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 9900 € : 206.91 € : 2500 kg : 1300 mm : 450 - 550 mm : 50 - 400 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumatic downholder(CMC P3 2500 400 M D1300) € 2.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : 2023 : 7288 : prompt, Zwischenverkauf v : Türkei : 5900 € : 1 : 500 kg : 1200 mm : 470 mm : 520 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC DOWN HOLDER SUPPORT ARM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
horizontal max. coil diameter 1000 mm
used
max. coil diameter 700 mm carrying weight 150 kg
used
Inv. Num. : 5360 Type: MS 48 Sp Producer: HS Created: 2008 Parameters: Maximum sheet plate width: 1000 mm Maximum blade weight: 1300 kg Roll diameter: 148-156 mm Coil: 1020 mm Machine weight: 700 kg Equipment: Electrical control panel with control
used
The WH-1512 G reversible reel is an automatic double-sided winding and unwinding reel for metal strips. While the metal strip is being unwound, the interlayer paper is wound up at the same time. The reel is suitable for coils with the following dimensions: - Outer width max. 150mm - Coil outer diameter max.1200 mm - Spool weight per side must not exceed 150 kg (full spool)
new
: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 13300 € : 272.65 € : 1 : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.