deco used for sale

MHME twin lane decorer / florette machine - used for broccoli In good working condition

material width: 0380/460 mm coil weight: 1,00 t coil internal dia.: 340 - 440 mm coil outside dia.: 1100 mm expansion: mechanisch total power requirement: 1,50 kW weight of the machine ca.: 0,500 t dimensions of the machine ca.: 1,40 x 1,10 x 1,40 m with bundle attachment arms at the back, sheet width 380 mm without bundle attachment arms, sheet width 460 mm hand crank 3 bundle attachment arms right-left rotation tape scanning via proximity switch (start-stop) with time delay speed control via handwheel 4-22 rpm mechanical brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 350 mm coil weight: 1 t coil internal dia.: 360-475 mm weight of the machine ca.: 500 kg dimensions of the machine ca.: BxTxH 1500x1500x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-51538-2069

Auction-ID: A1-51538-2053

Key data: 1000 mm, 1 t

for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg

Auction-ID: A1-51538-2068

material width:320 mm coil weight:2,6 t material thickness:0,5 - 2,0 mm coil internal diameter:400 - 510 mm coil external diameter:1200 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 band speed:0 - 30 m/min power capacity:1,5 kW weight:1,5 t

material width:300 mm coil weight:0,5 t material thickness:0,4 - 3,0 mm coil internal diameter:420 - 520 mm coil external diameter:1200 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:50 mm power requirement:1,5 kW weight:1,55 t dimensions (WxDxH):2,5 x 1,2 x 1,8 m

Key data: 300 mm, 500 t, 350 mm

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

sheet width: 300 mm coil weight: 1 t coil internal dia.: 350-450 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: BxTxH 1500x1500x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 250 kg coil internal dia.: Ø 290-550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 150 kg coil internal dia.: 300-500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 2x 500 kg coil internal dia.: Ø 300-540 mm coil outside dia.: Ø 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 1 t coil internal dia.: 375-550 mm coil outside dia.: 1600 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1500x1500x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 150 kg coil internal dia.: 290-550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 300 mm coil weight: 150 kg coil internal dia.: 200-520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 0,5 t coil internal dia.: 480-530 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,3 t dimensions of the machine ca.: BxTxH 1200x1200x1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton

Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton

Key data: 350 mm, 2 t, 1500 mm

Double decoiler Load - 2 x 1500 kg Belt width 350 mm Coil outer diameter - up to 1600 mm Coil inner diameter - 360-530 mm Manualle hydraul. Spread Pneumat. Pinch roller mechanical brake Dimensions - approx. 2 x 2 x 2.2 m WxDx H Bto - 1000 kg

This machine is stock goods that could not be electrically tested Location: Dresden/Müglitztal Availability: immediately

A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.

sheet width - max.: 0300 mm coil weight: 0,150 t coil internal dia.: 280 - 450 mm coil outside - diam. ca.: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manually adjustable brake Front and rear limiters 4 support arms Sensor-controlled loops The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clean Air System AOP Desktop, type DT 500 DeskAir PHI, For your workplace, whether in the office or in the home office, cleans the air and improves the indoor climate., - Length of the UV-C tube: 5 but has the, - power of 2.5, - Flow rate of the integrated fan:, - without blower, - Voltage: 230 V incl. voltage converter, - (integrated in the desktop) and 12 V plug, - Power: 12 volts 1 amp, - Case material: polymer, -, power: Room volume/ capacity: 74 m³ in 24 h, Dimensions / weight: Dimensions L x W x H: 152 x 76 x 300 mm, weight: 1 kg, The machine has 40 stone removing plates, each with 50 holes.: Dimensions L x W x H: 152 x 76 x 300 mm, weight: 1 kg

PND CB8 automatic coring and wedging line for Apples Consisting of tank for apple collecting, automatic feeder, cutting station and waste conveyor Capacity 100-120 fruits / min 60-110mm size Machine dimensions 4450mm x 2100mm x 2530mm Power - 4.74 kw Air - 5 bar Consumption 90 NL / Min Wedges 6,8,10,12,14,16

Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

max. coil diameter 840 mm carrying weight 250 kg

Met RoboHelix-machines kunnen spiraalvormige schoepen worden gevormd uit standaard ronde of van een patroon voorziene werkstukken. RoboHelix-machines vereisen uiterst nauwkeurige synchrone bewegingsbesturing. Door de gebruiker gegenereerde gegevens worden vanuit cloudgebaseerde software, HelixNinja, naar het apparaat gedownload. Deze informatie wordt vervolgens verder verwerkt om coördinaten in het 3D-vlak te genereren, waarmee het proces van het creëren van een vliegtuig vanuit een blanco basis wordt nagebootst. De motoren volgen synchroon deze coördinaten om het vliegtuig te produceren. Met de elektronische nokkenplaatfunctie in TwinCAT NC Camming (TF5050) is relatieve synchrone beweging overal en altijd mogelijk. Afmetingen en toleranties zijn geen probleem meer zodra de motoren en aandrijvingen zijn gekalibreerd. De tweede generatie RX250 uit de machinelijn van RoboHelix heeft een ...

horizontal max. coil diameter 1000 mm carrying weight 150 kg

Dima rolvormlijn voor de productie van Hibond 55 profielen - voor betonnen vloeren. De Hibond 55 is een 55 mm diep trapeziumvormig vloerprofiel dat wordt gebruikt als lichtgewicht vloeroplossing. Diktebereik: 0,75 gt; 1,5 mm Maximale plaatbreedte: 1200 mm Rolvormlijn: - 13 + 10 stands - asdiameter: 100 mm - center-center afstand tussen rollen: 180 gt; 350 mm

used Dräco coil carriage, smooth-running spindle, optimal tension, very easy to drive Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Belt width :1000 mm Coil weight load capacity: 1000 kg Colour: blue Weight: 110 kg Dimensions: 1300 x 750 x 1000 mm Coil inner diameter (min.): 250 mm Coil inner diameter (max.): 515 mm Coil outer diameter (max.): 1100 mm Coil width (min.): 1000 mm Clamping range :280 - 510 mm

sheet width - max.: 0280 mm coil weight: 1,00 t coil internal dia.: 290 - 570 mm coil outside - diam. ca.: 1000 mm 0: 42 U/min total power requirement: 1,10 kW weight of the machine ca.: t dimensions of the machine ca.: 1,30 x 1,00 x 1,45 m Control unit missing provisionally connected mechanical brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0240 mm coil weight: 0,150 t coil internal dia.: 320 - 520 mm coil outside - diam. ca.: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m • Motor drive • Rear limit disc • Front limit ring • Switch-on delay adjustable via potentiometer • Manually adjustable brake • Loop control via contact switch on the reel base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0650 mm coil weight: 2,00 t coil internal dia.: 240-270 mm coil outside - diam. ca.: 1500 mm expansion: mechanisch brake: über Motor speed: 5 m/min total power requirement: 0,55 kW weight of the machine ca.: 0,590 t dimensions of the machine ca.: 1,40 x 0,80 x 1,10 m Max. 650 mm without hoop-feeding arms Control system missing Temporarily connected The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0150 mm coil weight: 0,150 t coil internal dia.: 230 - 545 mm coil outside - diam. ca.: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m • Motor drive • Rear limit disc • Front limit ring • Left/right rotation selector switch • Manual/automatic mode • Loop control via contact switch on the reel base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 € : 284.16 € : 1 : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 80 mm : 1600 mm : 1550 mm : 2000 mm : 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070236 : September 2026, Zwischenv : Türkei : 6900 € : 133.17 € : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil internal dia.: 360 -440 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 200 mm band speed: 20 m/min : 150 kg - Internal clamping range: 200- 550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070008 : prompt, Zwischenverkauf v : Deutschland : 1200 € : 1 : 400 mm : 700 mm : 1500 mm : 2050 mm : 820 mm : 1000 mm with brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 € : 209.28 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 070007 : prompt, Zwischenverkauf v : Deutschland : 1200 € : 1 : 400 mm : 700 mm : 1500 mm : 2050 mm : 820 mm : 1000 mm with brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070009 : prompt, Zwischenverkauf v : Deutschland : 1600 € : 1 : 400 mm : 700 mm : 1500 mm : 2050 mm : 820 mm : 1000 mm with brake with 2 spare mandrels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two printing decks Mailander 162. Max sheet format: 1145x960 Feeder, TGX, Dampening system + ink control desk

A production ready Burster -decollator Hefter Systemform with auto paper feed. Available immediately.