deco used for sale

Wire diameter range: 8.0 - 16.0 mm section sections: up to 14,500 mm feed speed: up to 50 mtr/min machine has been repaired, repainted, repainted + new electrics; ready for use

wire diameter range: 8,0 - 16,0 mm cutting length: up to 14.500 mm wire feeding speed: up to 50 mtr./min. Machine is been repaired, tested, new painted, + new Electric ; ready for operation

Qty. 1 Second-hand Decoral coating profile production line Mfc.: DECORAL Built: 2004 Type: VIV 801/2 – TRANSFER SEMI – AUTOMATIC Output (theoretical): approx. 90 pcs./hour Consist of: Bagging machine – CO 130BB Automatic crane – basket handling Gas Sublimation oven VV801/2.T Electrical Sublimation oven for small parts – 68 kW The table can handle up to 15 profiles per oven batch and given that the cycle time is less than 10 minutes. The line was in operation for 2-3 years only – 1 shift operation!

water cutter

This Tornos-Bechler DECO 2000/13 manufactured in the year 2000. Operated through a Fanuc PNC-DECO control unit, this machine incorporates a head speed of up to 10,000 rpm. Includes a charger for bars from 4 mm to 26 mm in diameter. Presents perfect conditions Brand: Lathes-Bechler year 2000 MODEL: DECO 2000/13 production hours: 55,000 application type: Turning Location: Spain machine type: lathe Availability: Immediate Control unit brand: Fanuc General data Machine length: 1260 mm Machine width: 2000 mm Machine height: 1950 mm Machine weight: 3000 kg Control unit Brand: Fanuc Model: PNC-DECO main transmission Spindle speed range: 100-10000 rpm 1/MIN Half Main current type: 400 V Power consumption: 13KVa Technical benefits of the machine: - 10 axes - Robobar charger ssf-226 for bars from 4 mm to 26 mm in diameter Qualitative benefits of the machi ...

Equipment consists out of: 1 - Three decoilers 2 - Sheetholder with three levels 3 - Fasti straightening unit 4 - Fasti shear Transversal cut to length line / Querteilanlage / installation de coupe en longueur

Line consists out of: 1 - Double head decoiler: - cap: 25 ton - max length of coil: 2 meter - max diameter of coil: 3 meter 2 - Pre-leveller/straightening + edge slitting unit - 2 slitting heads are movable to slit the edges of the sheet - variable from 400 to 2000 mm wide 3 - Ungerer leveller/straightening unit - 6 + 7 rolls - for fine levelling/straightening - max thickness: 4 mm 4 - Schröder shear - max cap: 2050 mm - max thickness: 4 mm 5 - feed-out table + sheet storage Workwidth x sheetthickness: 2050 x 4 mm Straightner: yes Shear: yes

Capacity 10 tons Maximum band width 180 cm Pressure roller, etc. Complete documentation more info on request

Technical data: -Weight of coil: to 3. -Strip width: 600 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. Coil outer diameter. 1500 mm

Technical data: -Coil weight: 3.000 kg -Strip width: 1,000 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. -Coil outer diameter. 1500 mm

Capacity 20 kN, band width 500 mm, coil inner diameter 445-530 mm Coil outer diameter 1300-1400 mm Drive power 1.1 kW Rolling speed 16 U/min Manual spreading of the reel Crown with hydraulic unit complete documentation, operating instructions and manual

We convert your Machine parameters of a CNC machine from paper tape to text file The files will be sent to you by email, paper tape will returned to you by mail.

Loading capacity: max. 300 Kg. Coil outsite diam.: max. 1.000 mm Coil inside diam. 240 - 560 mm Coil width: max. 180 mm; good

Loading capacity: max. 2.000 mm Coil Inside diam. max. 1.000 mm Coil Outside diam. max. 1.200 mm Coil width: max. 500 mm

Loading capacity: max. 2.000 Kg. Coil Inside diam. max. 1.000 mm Coil Outside diam. max. 1.200 mm Coil width: max. 500 mm; ready for operation

Steris LS-2000 HAMO Autoclave Deconterminator Washer Desinfector400 V 200 x 80 x 75 cm For more products you can find in our other offers!

Te Koop: Endress & Hauser conducta Alarmdekoder. Type MKD

Federal load - 1500 kg Federal width - 500 mm Outer diameter - Max 1250 mm Spreader range without attachment segments 310-460 mm, 410-560 mm High of lateral ditches. Strip lines approx. 470 mm Bc9eg37hb2 Speed of the reel shaft - 16 U / min, power 0,55 kW Manual spreading, adjustable -Torque limiter, soft start, - band drain brake -with push segments -hydraulically actuated process equipment â completely. Hydraulic unit mass - L 3300 B 1500 H 1500 mm

Material width: 0300 mm Coil weight: 0.5 t Coil inner diameter: 270-360 mm Coil outside diameter: 1000 mm Speed: m/min Weight: 0,4 t JAWS: 200 mm extension of the diameter

Roche COBAS TaqMan + AmpliPrep Amplification Detector Manufacturer's description, all information without guarantee. Automated real-time amplification and detection analyzer. A high-capacity sample format that enables automated real-time amplification and detection of DNA or RNA for up to four assays simultaneously. In combination with the docking station, this system enables fully automatic sample transfer - from the COBAS® AmpliPrep instrument to the COBAS® TaqMan® Analyzer. Characteristics Works with the COBAS® AmpliPrep instrument and docking station for complete automation of sample preparation, amplification and detection Works undocked with the COBAS® AmpliPrep instrument AmpLILINK software provides a simple and efficient user interface for the custom-built Windows-based® PC that comes with the system Automated and fully docked systems available with COBAS ...

Decorative holding card TMCC

Key data: 300 , 1 , 1300

Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control

• Bandwidth / strip width: 1,600 mm • Strip thickness / strip thickness: 0.4 - 2.0 mm • Coil inner / coil inner-a:390-420 mm • Coil outer / coil outer-a: 1,500 mm • Spreading/ spreading: hydraulic/hydraulic • Motor drive AC servo cooling • For invertrers • Speed: 15 m/min. • Attachment segments for 500 mm • Reel shift: 200 mm • Working method: from top and bottom • Hydraulic valves on board

Load capacity - 1000 kg Outer diameter - max. 1200 mm Spreading range 550 - 750 mm Bandwidth max. 350 mm Spreading process - manual Reel drive - three-phase motor 400 V / 50 Hz Unwindspeed max. 30 m / min

Coil inner diameter 460 - 560 mm Coil outer diameter. Max. - 1500 mm Bandwidth - 350 mm Payload 2 t without drive, adjustable. Disc brake btto - 640 kg more info on request

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

Coil weight: 0 kg Material width: 0 mm Coil diameter maximum: 0 mm Technical data Max. loading capacity: 2X200 kg Voltage 50 Hz 3x: 230 Volt Driving motor (motor power): 0.74 kW Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1700 mm

Key data: 450 , 1 , 1400

Payload 1200 kg Width 450 mm Coil external diameter - up to 1400 mm Motor 1.5 kW Speed adjustable by frequency conversion Btto 500 kg

Key data: 500 , 1 , 1450

Width 500 mm Load capacity 1500 kg coil outer diameter 1450 mm Spread 370- 630 mm Motor 1.1 kW Btto 400 kg

Load capacity 20 kN, strip width 450 mm, Coil inner diameter 445-530 mm Coil outer diameter 1400 mm Drive power 1.5 kW Rolling speed CONTROLLABLE with frequency converter Danfoss VLT 2800 Manual spreading of the reel crown Btto 600 kg

MHME twin lane decorer / florette machine - used for broccoli In good working condition

Double reel 2 x 2500 kg Bandwidth - up to 350 mm

max. coil weight - 2000 kg Belt width 500 mm Coil external dimension - cca 1400 mm Pneumat. Pinch roller

Decoiler with straightening machine Passage max. 200 mm width Sheet thickness 0.5 to 2.8 mm Speed 5 to 30 m/min (variator)

: neu : 2023 : 7287 : ca. 2 Wochen ab Auftragse : Türkei : 4600 € : 1 : 500 kg : 1200 mm : 470 mm : 520 mm : 300 mm : 50 mm : 0,55 kW : 1400 mm : 1200 mm : 1550 mm : 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11200 € : 231.84 € : 2500 kg : 1300 mm : 450 - 550 mm : 50 - 600 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: Pneumatic downholder (CMC P3 2500 600 M D1300) € 2.100,-- BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 15200 € : 314.64 € : 4000 kg : 1300 mm : 450 - 550 mm : 50 - 600 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumatic downholder(CMC P3 4000 600 M D1300) € 2.200,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7100 € : 148.39 € : 1250 kg : 1300 mm : 450 - 550 mm : 50 - 400 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumaticdownholder (CMC P3 1250 400 M D1300) € 2.200,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 9900 € : 206.91 € : 2500 kg : 1300 mm : 450 - 550 mm : 50 - 400 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumatic downholder(CMC P3 2500 400 M D1300) € 2.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 7288 : prompt, Zwischenverkauf v : Türkei : 5900 € : 1 : 500 kg : 1200 mm : 470 mm : 520 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC DOWN HOLDER SUPPORT ARM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dekorring TRILUX 07481DD Article number: 00431311 Inner diameter: Ø 230 mm outer diameter: Ø 310 mm height: 40 mm New ! Dimensions ( decorative ring ): 310 x 310 x 40 mm Dimensions ( packaging ): 410 x 400 x 50 mm

material width: 350 mm coil weight: 500 kg material thickness: mm coil external diameter: 1000 mm no. of straightening rolls: 9 straightening roll diameter: 45 mm speed: m/min power requirement: 9 kW Weight: - t Dimensions (WxDxH): - m Decoiler and straightener on one base plate - Straightening machine - decoiler - Control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:320 mm coil weight:2,6 t material thickness:0,5 - 2,0 mm coil internal diameter:400 - 510 mm coil external diameter:1200 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 band speed:0 - 30 m/min power capacity:1,5 kW weight:1,5 t

material width:300 mm coil weight:0,5 t material thickness:0,4 - 3,0 mm coil internal diameter:420 - 520 mm coil external diameter:1200 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:50 mm power requirement:1,5 kW weight:1,55 t dimensions (WxDxH):2,5 x 1,2 x 1,8 m

Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton

Coil weight: 2 x 500 kg Material width: 300 mm Coil exterior diameter: 1200 mm Expansion range: 350 - 610 mm Weight of machine approx.: 2,2 ton

Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton