We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Full cab cover FP2NC and FP2A Gene his all overhauled newly painted new Macrolonscheiben complete all parts available incl. hose and grid
used
Newly painted Size (LxWxH): 100cm x 70cm x 23cm
x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm control: Grundig Contour tool taper: SK40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
The machine is in good condition and can be inspected under power by appointment. Specifications: X: 500 mm Y: 300 mm Z: 380 mm Milling spindle by hand: 100 mm 18 spindle speeds: 40 - 2000 rpm 18 feeds X, Y, Z: 10 - 500 mm/min Rapid response: 1500 mm/min Clamping surface angle table horizontal: 700 x 320 mm Motor: 3 kW, 1420 rpm Dimensions approx.: 1500 x 1500 x 1800 mm Weight: approx. 1.5 t
used
X-travel: 400mm, y-travel: 400mm, z-travel: 400mm, feed rate: 2-3600/min, rapid traverse: 4000mm/min, including documentation, without spare parts, gear for speed under 500/min is defective and the milling spindle is losing oil.
used
Control: Deckel Dialog 11, with vice, an inspection is possible.
used
Controls: Deckel Dialog 11, including documentation, on-site inspection is possible, has been regularly serviced.
used
Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible.
used
Rotary encoder, tachometer, encoder -Spare part comes: from a machining center cover type FP3A -Number: 1x speedometer available -Price: per piece -Dimensions: 83/122/H95 mm -Weight: 1.1 kg
used
Flat belt pulley, toothed pulley, multi-belt pulley -Spare part comes: from a machining center cover type FP3A -Diameter: 80 mm -Recording: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg
used
Chip collecting tray, cabin, housing, machine housing - Origin: from a machining center Deckel type FP3A -Machine housing material: aluminum profile and plexiglass -Transport dimensions: 975/850 / H940 mm -Weight: 66 kg
used
Universal milling head, milling adapter, milling extension, angle milling head -Spare part comes from a machining center cover type FP3A -Spare part no.: 2271 -Milling head: fully rotatable -Tool holder: hydraulic -Spindle mount: SK40 -Stroke: 80 mm -Transport dimensions: 735/260/H580 mm -Weight: 121 kg
used
Article number: 27-06-063 Manufacturer: Chip Anne, Lid Mint condition Custom-fit seat and paint finish in RAL according to customer requirements Shipping time: All rights reserved. Year of construction: NEW L x W x H: approx. 1000x1000x200mm Weight: approx. 4kg suitable: FP2 & FP3 FP2 Active Digital FP3 Active Digital FP2 Infinitely variable FP3 Infinitely variable
used
Nice machine, however, parts of the controls are missing. Mechanically very good condition Sell spare parts or complete machine ! Table, milling head, guides, spindles, measuring rulers, motors, E-parts, control panel, ... or to convert to a new control system !
used
x-travel: 300 mm Y-travel: 220 mm z-travel: 400 mm Clamping surface: 620 x 390 mm Speed: 31 - 3150 rpm Feed range: 1 - 3600 mm/min Rapid traverse: 4000 m/min Spindle mount: SK 40 Swivel head +/-: 90° Quill stroke: 60 mm Total power requirement: 1.09 / 2.0 / 4.0 kW Machine weight approx.: 1.3 t Approx. space: 1.3 x 1.1 x 1.6 cm The machine comes from a training course and has been put into storage. It is possible that the z-axis is defective.
used
Article number: 07-07-091 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment Coolant Device *New* Complete documentation Various tension wrenches Horizontal spindle cover cap Safety handwheels 3-axis digital display SINO *New* Machine feet ...
used
Article number: 07-07-090 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment Coolant Device *New* Complete documentation Various tension wrenches Horizontal spindle cover cap Safety handwheels 3-axis digital display SINO *New* Tilting swiv ...
used
Article number: 07-07-085 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment Coolant Device *New* Complete documentation Various tension wrenches Safety handwheels Horizontal spindle cover cap 3-axis digital display SINO *New* Machine feet Tilting swivel table electricall ...
used
Description: Deckel FP 3 - E with Weinreich control. Travel X: 500 mm, Y: 300 mm, Z: 380 mm Tablesize: 800 x 370 mm Spindle: SK 40 M16, Stroke 80 mm Spindlespeed: 40 - 2000 U/min. Spindledrive: 3 kW vertical milling head swivelable. Machine is sold in unchecked condition. The machine vice is not part of the offer. Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 1,900 mm, weight approx.: 2,000 kg
new
An unused Spiral fraes with all the zubehoer packed in a wooden box. Suitable probably for lid FP1 bsi lid FP3. Complete access system such as wheel box and alternating wheel, both for the raeder box, as well as for the sub-apparatus are included in the scope of delivery. The device can be used to fraesen spirals or as a sub-apparatus. The facility has probably never been used before and is therefore in a new state. Special price
used
Deckel FP3 A Milling Machine Dialog 11 Year of construction 1990, Dialog 11 control, working range 400 x 400 x 450 mm, quill stroke 80 mm, spindle speeds 4000 min, tool holder SK 40, feed rate 2 - 6000 mm/min, working range 400 x 405 x 400 mm, angle table, weight approx. 2000 kg, dimensions without control panel 1700 x 2100 x 2000 mm. Accessories: Universal tilt and swivel table Electronic handwheel, Coolant equipment Manuals Very good technical condition. Unfortunately, the machine was poorly painted over. A viewing under power is possible by appointment. If you have any questions, please feel free to contact us by phone at any time! You can find information on this under Legal information of the seller. Thank you very much.
used
Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!
used
Shock head for cover FP1 and FP2 General overhaul new store and painted. Shock length 80 mm
used
; very good