136,422 used machines on RESALE, but how to find them? Machine Search
Engine Brand: CUMMINS, Condition: USED, Engine Color: Beige , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: None Mounted , Exhaust System: Dry , , https://www.hamofa.com/stock/diesel-engines/cummins-qsm11-cpl8545-used /139, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: QSM11 CPL8545
Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...
Laboratory processing plant (universal machine) Manufacturer: Stephan Type: UMC 12-F No.: 712.673.01 Built: 1986 Power: 1.8 kW 380 V, 50 Hz 150-2800 rpm speed-controlled with double jacket, sight glasses with new control cabinet very good condition on request: with small vacuum pump LBH system: 500 x 400 x 640 mm LBH control cabinet: 600 x 600 x 220 mm LBH pump: 270 x 220 x 210 mm
Garant Oil Cabinet 145x72x75cm Execution: Stable sheet steel construction with reinforced hinged doors, lockable by push handle with pin cylinder lock. The cabinet body is equipped with an individual pull-out protection. Due to the individual pull-out protection, only 1 pull-out shelf can be opened at a time. The cabinet is thus largely secured against tipping. Mounting of pull-out shelves and drawers in 25 mm increments. Oil cabinet equipped with plastic oil canisters Drawers/pull-out shelf Load capacity: 200 kg Drawer extension (partial/full extension): 100 % Drawer pull-out: Pull-out lock Height adjustment in grid: 25 mm Pin cylinder lock: modular insert HxWxD=145x72x75cm without key Item condition used RRP 3240,- € You can find more control cabinets - new and used - in our shop! International shipping costs on request!
Dimensions (L/W/H): 1070x495x895 mm Weight: 80 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 750x705x1800 mm Weight: 170 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 945x705x1800 mm Weight: 206 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 820x410x810 mm Weight: 64 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modu ...
Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modu ...
Key data: 762 , 508 , 508
HAAS UMC-750SS Machining Center TECHNICAL FEATURES: Year: 2019 Number of continuous axes: 5 X-axis stroke: 762 [mm] Y-axis travel: 508 [mm] Z-axis travel: 508 [mm] C-axis angular travel: 360 [°] Table dimensions: Ø630 x 500 [mm] Maximum weight Tabletop Allowance: 300 [Kg] B-axis angular travel: +110 [°] / 350 [°] Pin Attachment: CT 40 Maximum speed Spindle: 15000 [rpm] Spindle power: 22.4 [kW] Number of tool magazine stations: 40 Capacity of the garden tray: 284 [l] Number of hours in operation: 5277 [h] EQUIPMENT INCLUDED: x1 Center-Spindle Watering x1 High Pressure Coolant Pump 21 [bar] x1 RENISHAW Wireless Coin Probe x1 Calibration Sphere x1 RENISHAW Tool Probe x1 HAAS Oil Mist Vacuum x1 HAAS offset crank x1 HENNIG Chip Conveyor Type 101435 Machine visible under tension for testing at our premises, by appointment. Price excl. VAT on request, ...
overbelt magnet ferrous separator magnet dimensions 1040 x 530 x 256 mm overall dimensions 2190 x 1214 x 635 mm total weight approx. 1020 kg motor 1,5 kW
Electric heating: 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Length: 140 Height: 270 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment
Description mobile transfer BOGRAMA UEB 550 A with clocked blowing air and breakout station
Planausdrehkpof Wohlhaupter UPA 5 with accessories as shown. Cone ISO 50
Engine Brand: PERKINS, Condition: USED, Working Hours: 7700 Hour(s), Engine Condition: Used , Starter Voltage: 12 Volt , , https://www.hamofa.com/stock/compressors/ingersoll-rand-p70wn-compress or-7-bar-used/42278, , = More information =, , Type number: P70WN COMPRESSOR 7 BAR
EKATO UNIMIX LM 4,5 laboratory vacuum and homogenizing mixer for the manufacture of cosmetic and pharmaceutical products such as emulsions, suspensions, creams, lotions and pastes, capacity from 1,0 to 4,0 litre, anchor stirrer with side and bottom scrapers (50-210 RPM), homogenizer/dissolver (8000-24000 RPM), jacketed for heating/cooling, usable for vacuum, maximum internal working pressure -1/+2 bar, maximum working pressure jacket 6 bar, maximum internal temperature 133 ºC, maximum temperature jacket 150 ºC, lid-lifting device, temperature control system, electrics 220V; 50/60 Hz, maximum power 3 kW.
x-travel: 10000 mm y-travel: 1500 mm z-travel: 1000 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer all kinds of electronic componentes for URBAN and Elumatec machines. Contact us on spares@finke machines
peak heights: 250 mm point distance: 1500 mm bar pass: 105 mm
Universal Blister machine with platen sealing for pharmaceutical production incl. various format parts and LYNX-5-fill control. The machine processes ALU/PVC blisters and is suitable for tablets, dragées und capsules. The forming an packing machine operates in single stroke (ET), i.e. all stations for the main functions forming, sealing and punching operate in the same cycle, while the film runs through the machine intermittently. Output: 15-50 cycles/min. at 12 mm forming depth | 15-40 cycles/min. at 28 mm forming depth.
APV COMBI UHT TREATMENT STERILIZATION PASTEURIZATION PLANT – 2006 Includes both TUBULAR and INJECTION systems. Capacity 4.000 - 8.000 Lt /h DISASSEMBLED AND READY FOR LOADING - APV PLATE HEAT EXCHANGER for cooling - APV TUBULAR ( INDIRECT ) UHT Treatment system. - APV INJECTION ( DIRECT STEAM ) UHT Treatment system. - APV ASEPTIC HOMOGENIZER 250 BAR - OPTIONAL - APV CIP CLEANING UNIT - APV VALVE CLUSTER FOR ASEPTIC TANK - (TANK IS EXCLUDED) - ELECTRIC CONTROL PANELS Fast heating (~300°C/sec) for optimal taste and minimal degradation Instantaneous flash cooling for flavor and aroma preservation Uniform heating via indirect tubular exchangers for gentle thermal treatment High energy recovery (up to 90%) to reduce utility consumption and cost. Precise thermal control with uniform product treatment Efficient spore kill with very low C ...
pressure vessel Brand:Udo Kleusberg Type: 448 Year of construction: 2003 Volume: 15o liters Pressure: 11 bar All information without guarantee
PALLETIZER KRONES ALONG WITH THE CONVEYORS AS SHOWN IN THE DRAWING ATTACHED Palletizer KRONES PRESS UNI, production year 2007. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, • Divider, • Packs turner Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors
Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors
Layer-reeled solid wire for welding under inert gas in all positions. Shielding gas types: Ar, CO2 / Ar, CO2, O2 / CO2. Welding wire roll MAG wire electrode, unused, original shrink-wrapped in foil, ovp in cardboard! 15kg 1.2mm Manufacturer Union Type A600IG Probably for deposition welding Multiple available. For complete acceptance special price! Special price!
complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition
Type MZUTL 15 Working capacity ~ 15 liters Total capacity ~ 26 liters Minimum working capacity of 5 liters Tank inner diameter ø 292 mm Steel grade in contact with product 1.4301 Fastener Seal Material FPM, SILICONE, NBR, PTFE, EPDM Homogenizing mixer weight ~ 474 kg Height 1760 mm Height with Raised Lid ~1950mm Length 1770 mm Length with tilted cabinet 2160 mm Width ~ 780 mm Width with tilted cabinet ~ 1050 mm PTFE double-acting scrapers Anchor Agitator Drive Electric Motor 0.55 KW, 1400/88 RPM Gear ratio reducer i=15.84 Rotation of the anchor agitator Continuously 32+160 rpm Comb homogenizer HZB N Homogenizer Drive Electric Motor 7.5KW, 2885rpm Max. sound pressure level 89 dB (characteristic A) Homogenizer rotation Continuously variable 1430+6630 rpm Jacket heating ZBG heating tank (7 kW) Jacket Cooling HE Heat Exchanger Minimum / maximum temperature in the t ...
Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland
Type MZUT- EMBF 15 C Working capacity 15 liters Minimum working capacity ~ 5 liters Total capacity ~ 26 liters Tank inner diameter 294 mm Steel grade in contact with product 1.4301 Fastener Seal Material FPM, NBR, PTFE, EPDM Task Mixer Weight ~ 276 kg Height ~ 1630 mm Length ~ 1390 mm Width ~ 720 mm EMBF Emulsifier Emulsifier drive Electric motor 5.5 kW, 2890 rpm Emulsifier rotation Continuously 1500-5500 rpm Emulsifier rotation during CIP Max 4500 rpm Heating jacket heating tank (7 kW) Minimum / maximum temperature in the tank 5 / 95° C Minimum / maximum operating temperature in the tank 20 / 90° C Minimum / maximum jacket temperature 5/ 130° C Minimum / maximum operating temperature in the jacket 25/ 120°C Permissible tank pressure 0 bar Maximum jacket pressure 4 bar Electrical power supply 3x400V+N+PE, protection 50 A Power Consumption -15kW Tank Lighting L ...
Unimix SRC1600 vacuum processing vessel (vessel -1/2bar, 133C, total capacity 2145Ltr, working capacity 1600Ltr; jacket 4bar, 151c, 130Ltr., dished bottom, hydraulic lift to open the top, with EKATO S-Jet Homogeniser SJ 1000 SO EX in the bottom of the tank (380 V, 18kw, 3000rpm, new 2009), anchor stirrer/scraper (new 2022) with ATEX PTB motor on the top ( 380´V, 13,5kw), , vacuum pump Elmo Rietschle L300 2BV5111 incorporated inside main body, working pressure -1/+3bar, reactor outer sizes 1950x2300x2900 heigh (including motor), mounted on frame (floor size 2200x3300, frame height 300mm) ,material stainless steel, new operation software 2022, reactor is still in use for cosmetics production, Year of construction of main vessel 1992, all reconditioning data available. At a reduced price compared to new. Ready for shipping in 30 days after transaction agreed. You are welcome to inspect the ...
Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package
Used Used 12.1.1 Monoblock Filling: Condition: As Is Used 12.1.1 Monoblock Filling: Speed: 2500 BPH Direction: clockwise For glass bottles FILLER 12 valves Filling type: light vacuum Valve type: mechanical SCREW CAPPER Single-head Cap size: ? 31.5 mm x 24 mm (h) Manual height adjustment T CAPPER GENERAL DATA Machine dimensions: 2500 mm x 1500 mm x 2500 mm (h) Safety protections Code: QT 730 More details: https://bottlingscout.com
Used Used filler Vir Mauri for distillates 2.200 bph: Condition: As Is Used filler Vir Mauri for distillates Year: N/A Speed: 2.200 bph Direction: Clockwise Model: PAVONIS 16 16 valves Safety protections Code: T 190 More details: https://bottlingscout.com
Used Used filler Vir Mauri 9.000 bph isobaric: Condition: As Is Used filler Vir Mauri Year: n/a Speed: 9.000 bph Direction: Clockwise Number of valves: 36 Type of filling: isobaric Self-leveling De-gassing Code: T 189 More details: https://bottlingscout.com
Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package
Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...
Used Used Filler Dipran 30 valves 5.000 bph: Condition: As Is Used Filler Dipran 30 valves 5.000 bph: Speed: 5000 BPH Clockwise directions Suitable for: glass bottles 30 filling valves Filling type by high vacuum Valve type: mechanical Manual tank height adjustment Diameter measurements of the supported bottles 50-115 Machine dimensions: 2500 mm x 2500 mm x 3000 mm (h) Safety protections Code: T 206 More details: https://bottlingscout.com
Used Used filling monoblock Enoberg 16.16: Condition: As Is Used Filling monoblock Enoberg 16.16 | 2.000 Bph Year: N/A Speed: 2.000 bph Direction: Clockwise Rinser 16 clamps Filler 16 Valves Product: Dense Liquids Safety protections Code: QT 617 More details: https://bottlingscout.com
Used Used filling monoblock Cobert 16.1: Condition: As Is Used filling monoblock COBERT 16.1 Speed: 2.500 bph Filler 16 valves | Gravity filling Single head corker | Natural Straight Cork Safety protections Code: QT 670 More details: https://bottlingscout.com
working length: 3100 mm Working width: ca. 3400 mm Working height: 750 - 1000 mm Haberkorn return means for Umfälzautomat For frame from 300 mm to 3000 mm for automatic Return consisting of: First cross roller conveyor approx 3100 mm long ------------------------------------------------- built-in conveyor belts for depositing the wing on the cross roller conveyor with about 10 mm stroke Driving speed of about 5-30 m / min. Roller diameter 80 mm Rollers with PVC coating Gear motor with 0.37 KW 2 Synchronized lifting device for cross roller conveyor -------------------------------------------------- ------------------------ built-in rollers with stepless drive about 5-30 m / min. max. 100 mm stroke Roller diameter 80 mm Rollers with PVC coating Synchronous storage of GG 25 hardened gears and rods 2 pneumatic cylinder 80 x 100 mm adjustable stops (top - down ) Synchronization via shafts ...
table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used Used Case Erector Ape Form 1.200 Hm B: Year: 2002 Condition: As Is Used Case Erector Ape Year: 2002 Speed Model: FORM 1200 HM B Type: Cold glue Nordson Gluer Safety protections Code: G 82 More details: https://bottlingscout.com
Used Used Case Packer Keber: Condition: As Is Used Case Packer Keber Speed: 7.000 bph Change heads: 3?2/2?3 fixed, e suction head for jars Bottle formats: magnum for 280 ml Safety protections Code: JL 263 More details: https://bottlingscout.com
Used Used labeller Cavagnino&Gatti 4.000 bph: Year: 2002 Condition: As Is Used Labelling machine Cavagnino & Gatti Year: 2002 Speed: 4.000 bph Clockwise direction Bottle? s equipment for conical bottle ? 78 diameter 2 adhesive station to apply: Front Back 1 glue station to apply ?I? seal Safety protection Code: EA 84 More details: https://bottlingscout.com
Used Used labeller Cavagnino&Gatti 5.000 bph: Year: 2008 Condition: As Is Used labeller CAVAGNINO&GATTI 9T 3S Year: 2008 Speed: 5.000 bph Direction: Counterclockwise 9 heads 3 adhesive stations Safety protections Code: EA 438 More details: https://bottlingscout.com
Used Used labeller P.E. 4.500 bph: Year: 1998 Condition: As Is Used labeller P.E | 8T adhesive Year: 1998 Speed: 4.500 bph Direction: Counterclockwise 8 heads Nr.3 adhesive stations Nr. 2 cold glue stations Safety protections Code: EA 448 More details: https://bottlingscout.com
Used Used labeller Kosme 4.000 bph: Year: 2003 Condition: As Is USED LABELLER KOSME Year: 2003 Speed: 4.000 Bph Direction: Clockwise Number of heads: 8 Number of cold glue stations: 3 Type of application: Front label Back label Collar Additional ironing on exit Safety protections Code: EA 627 More details: https://bottlingscout.com
maximum number of results exceeded
please refine your search
