Machines à ébarber et chanfreiner les écrous

Taille de la table: 800 x 500 mm Hauteur de la pièce: +-30º / 510 mm Course X / Y / Z: 800 x 550 x 510 mm Dimensions de la pièce: 1300 x 1000 x 510 mm Poids de la pièce: 3.000 kg diamètre du fil: 0,10-0,33 mm

Longueur de la table: 600 mm Largeur de la table: 400 mm Axe X: 400 mm Axe Y: 300 mm Axe Z: 350 mm Dimensions des pièces: 900 x 630 x 350 mmVolume: 490 LPuissance totale requise: kWPoids de la machine Ca.: TDimensions de la machine CA.: M

course x: 530 mm course y: 600 mm course z: 300 mm0: 7 barConsommation d’air: 70-90 Nl / min.tension: 120/230V + -5% kVApuissance totale requise: 1,5 kWpoids de la machine ca.: 22 tdimensions de la machine ca.: m

largeur de passage : 1200 mm hauteur de travail : 1200 mm profondeur de la chambre : 1200 mmpression de service : 6,0 bartension : 380 Vpoids de la machine ca. : 1,4 tdimensions de la machine env. : 1,40 x 1,70 x 2,70 m

dispositifs de serrage hydraulique pneumatique: hydraulisch : env. 5 lfdm x 300 mm : hydraulique: Rexroth tank: 250 l:

voltage: 220 Vweight of the machine ca.: 0,260 tdimensions of the machine ca.: 1,20 x 0,45 x 1,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.000 mmy-travel: 800 mmz-travel: 585 mmControl: MAZATROL FUSION 640 M table-size: 2.240 x 750 mmtable weight: 3.000 KgT-slots: 5 x18 width of T-slots: 150 mmdistance vertical spindle / table: 200-785 mmdistance from the column: 880 mmturning speed range - milling: 22 – 6.000 U/mintransmission ratio: 2 spindle taper ISO: 50 spindle drive: 40 HPTorque: 529 NmTools changer: 30 pos.Internal cooling system: 15 barChip coveyor: total power requirement: 59,40 kWweight of the machine ca.: 14,5 tdimensions of the machine ca.: 6.280 X 3.274 X 3.510 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhein iTNC530 rapid traverse: 36 m/min: Random 32 fachtable diameter: 600 mmInternal cooling system: 20-70 barturning speeds: 18.000 u/minTool adapter: HSK A 63 Machine on: 27466 hSpindle hours: 16316 htotal power requirement: 60 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4200x5800 mm-18000rpm spindle-HSK63A-CTS with paper filter band and skimmer-blum laser probe-Tool probe preparation ( without tool probe )-30 positions tool changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

acier à barres rondes: 63 mmériste carrée: 55 mmériste plat: 100 x 25 mm: moteur: 380 V, 6,3 kW poids: env. 2.450 kg

x-travel: 3000 mmy-travel: 1200 mmz-travel: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m• RDS 2.5°x2.5° automatic rotary head• Multi-sensor capability, allowing the use of the following tactile probesworking: ZEISS VAST-XXT, Viscan, DTS, LinenScan, RST-P and RENISHAW SP25, TP6,TP20 and TP200.• Calypso software• Machine precision: PE_E=(3.2+L/250)µm. MPE_P = 3.0 µm. MPE_THP=4.0 µm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mmy-travel: 1200 mmz-travel: 450 mmcontrôle: 85er 8bit total power requise: kWpoids de la machine ca.: tdimensions de la machine ca.: m