deburr used for sale

ROLEI Deburring Machine Manufacturer ROLEI Condition untested Location 72589 Westerheim DE Lot 64

Tischabmessungen: 960 x 120 mm

ROLEI EF/165 Deburring Machine Manufacturer ROLEI Model EF/165 Condition untested Location 72589 Westerheim DE Lot 9

diameter of brush: Ø 250 mm width of brush: 80.0 mm turning speed range: 1450 U/min bore: Ø 24.0 mm Wire thickness: 0.3 mm Dust suction hood: 50.0 mm voltage: 400 Volt engine output: ca. 3.0 kW weight of the machine ca.: 90.0 kg range L-W-H: 820 x 450 x 1140 mm The BES 250 D brush deburring grinder is ideal for deburring the inner and outer edges of profiles and flat materials. Thanks to its powerful drive motor and robust construction, this machine is ideally suited for professional use in workshops. Product Features - Ball-bearing-mounted rotor ensures smooth operation and a long service life - Ideal for deburring cut edges, removing rust from metal surfaces, . and removing paint coatings,... - Comes standard with a 50 mm diameter suction port for connecting to a . dust extraction system - Powerful and low-noise drive motor - Low-vibration operation thanks to a sturdy, torsion-resist ...

working width: 630 mm workpiece width - max.: 1,0 - 100 mm sandingbelt width: 650 mm sandingbelt length: 1900 mm dimensions: 1320 x 2250 x 2200 mm weight of the machine ca.: 2500 kg Description: - Universal, compact entry-level machine for machining steel, stainless steel, and aluminum - The continuously adjustable sanding belt speed allows you to reliably remove cutting burrs and achieve a smooth surface finish - With our flap-disc unit, you can achieve uniform edge rounding on all sides and a non-directional finish - The speed-controlled rounding unit enables different rounding depths and optimal processing for every application - 150 mm wide magnetic track The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26129 Technical data: - Max. load capacity approx. 250 kg - Drum dimensions approx. W 450 x D 600 mm - Drum capacity approx. 80 l - Drum opening with cover lid - Drum inside is rubberized - 2 speeds - Motorized tilting of the drum - Drive 400 V / 2.3 kW - Space requirement approx. W 1000 x H 1800 x D 1600 mm - Weight approx. 500 kg

Offer 26188 Technical data: - Brush diameter up to approx. 120 mm - Brush width up to approx. 90 mm - Shaft mount 20 mm each - Manual height adjustment of the top brush by handwheel - Drive per motor 400 V / 2.5 kW - Space requirement approx. W 650 x H 1150 x D 450 mm - Weight approx. 80 kg

USED OETIKER TYPE RG 70 DEBURRING BARREL SERIAL NO.: 7053 Equipped with 1 Set of deburring stones Dimensions and weight Pallet Europe 1200x800xH1000mm - weight 250 kg + 1 pallet 800x600xH800mm - weight 250kg Auction-ID: A1-50950-61

max. wheel diameter: 1.000 mm gear width: 500 mm max. module: 2 min. module: 50 Control: Klaassen table load of rotary table max.: 3.000 kp dia. of 3 jaw chuck: 365 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 2,85x1,5x2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece width - max.: 1200 mm workpiece height max.: 170 mm workpiece height min.: 0,6 (L+B > 5xH) mm workpiece sizes - min.: 50x50 mm work height max.: 900 mm Conveyor belt speed: 0,3-10 m/min total power requirement: 16 kW weight of the machine ca.: 2.650 kg dimensions of the machine ca.: 2100x2200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 13600 € : 261.12 € : 1300 mm : 150 mm : 150 mm : 250x350 mm : 945 mm : 0.75 kW : 1400 mm : 1000 mm : 1450 mm : 300 kg Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: The grinding  ...

Consisting of a round vibrator, a round dryer and a water treatment system (type: Z300 Turbo) with centrifuge (type: Z800). Auction-ID: A1-51529-123

max. wheel diameter:50 mm gear width:20 mm max. module:4 mm min. module:0,1 mm total power requirement:12,5 kW weight of the machine ca.:4000 kg dimensions of the machine ca.:2,2 x 2,5 x 2,3 m workpiece length - max.:300 mm

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility. Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm ? 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and a ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining unit ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can acc ...