129,254 used machines on RESALE, but how to find them? Machine Search
Barwell Cryogenic Deflashing and Deburring Machine Freeze Trim Chamber Model BFT10
Brush deburring machine, tube deburring machine BAUER type BE 1Masch. No. 29-0520 Year of construction 1992Brush diameter 250 mmBrush width 25 - 55 mmSpeed 1500 / 3000 rpm. Power 2.2 / 3 kWNerg connection 380 Volt, 50 Hz- Material supportSpace requirement L x W x H 500 x 450 x 440 mmWeight 45 kgGood condition; used
Brush deburring machine, tube deburring machine BAUER type BE 1Masch. No. 05-72025 Year of construction 2005Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 3 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brushSpace requirement L x W x H 550 x 450 x 440 mmWeight 65 kgGood condition; used
Brush deburring machine, tube deburring machine ERINI type 250Year of construction approx. 1995Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 2.8 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brush- Suction connection 100 mmSpace requirement L x W x H 620 x 500 x 1150 mmWeight 100 kgGood condition; used
- double sided brishing / deburring machine Metabo 7445 / Metabo 72730 - 4 kW - shaft diam. 35 mm - 1500 rpm; ready for operation
Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration
High-performance deburring system for internal and external deburring of profiles and tubes in a single operation (approx. 3 sec.) Powerful industrial geared three-phase motor, frequency-controlled, for infinitely variable settings of the required speed: 600 - 2,700 1/min, for deburring pipes and profiles with material dimensions horizontal/vertical 120 mm, Easily adjustable work table height (adjustable and lockable) for the appropriate material size adjustable, lockable infeed (carriage) of the deburring brushes to the work table by means of a handwheel with locking function. Drawer for dust residues. Sheet steel housing with prepared for connection to an external extraction system. Housing hoods foldable for changing the brushes. Machine body RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm corrugated st ...
TIMESAVERS 41 SERIE 1350 WRD deburring machine was manufactured in 2004 in the Netherlands. The wide belt deburring machine is used in both small and large production facilities for precision smoothing of sharp edges and finishing work. The machine provides high performance and reliability throughout its service life. The surface machining of workpieces made from e.g. steel, aluminium and titanium is performed wet by a grinding system comprising a reliable abrasive belt and brush unit. The workpiece is dried at the end of the machining process so that the parts leaving the machine are dry and free of contamination. The deburring machine has an integrated paper belt filter into which the used coolant is transferred at the end of the process in order to separate the swarf and allow the coolant to be reused. Technical specifications of the TIMESAVERS 41 SERIE 1350 WRD deburring machin ...
Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.
Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg
Code: 0273 Brand: LEVIGALTECNICA Model: 3R / 600 Dry burring, honing and calender machine for the superficila finishing of blank, punched, laser or plasma-cut materials presenting burrs, which because of aesthetics and/or safety reasons, must be removed Technical data: Max working width 650 mm Min workable thickness 0,5 - 1 mm Max workable thickness 150 mm Abrasive belt motor power 7,5 Hp Belt motor power 1 Hp Bench lifting motor power 0,75 Hp Automatic table positioning Height display Variable belt speed Vacuum table 1° Roller group diameter 100 mm 2° Roller group diameter 100 mm 3° Roller group diameter 120 mm Suction inlet diameter 120 mm Compressed air 7-8 bar Overall dimensions mm 1500 x 2700 x 2200 h
Inv. Num. : 6870 Type: M950 Producer: SCM Created: 2017 Parameters: Weight: 2200 kg
Inv. Num. : 7803 Type: EM 5 N II/L 2F Producer: ERNST Created: 2006 Parameters: Minimum length of the workpiece: 350 mm Maximum workpiece thickness: 70 mm Grinding width: 1380 mm Weight: 5100 kg
Brush deburring machine, sheet metal deburring machine, deburring machine -Deburring machine for: stamped, laser and nibbling parts -Deburring system for: sheet metal edges with notches -Drive power: 0.71 kW -Speed: 4500 rpm -Dimensions: 400/180/H130 mm -Weight: 3.5 kg
Deburring machine, hole deburrer, bore deburrer, deburring device -Drive: 0.30 kW -Countersink -Speed: 585 rpm -Dimensions: 500/300/H460 mm -Weight: 31 kg
Piller HD Supply System WSD 21H+1000 Litre Tank Specifications: Designation: WSD 21 H Year of Make: 2019 HD pump: Hammelmann Max. operating pressure: 780 bar Max. flow rate: 38 l/min Power HD pump: 55kW Max.water temperature: 40 degrees Operating voltage: 3x400V/50Hz Connected load: 80kVA Total current consumption:115A Curb weight: 2300kg Operating Weight: 3300kg Dimensions LxWxH: 3240x1200x2800mm Control: Siemens Comfort Panel KP400 Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you
Brush deburring machine, double bench grinder, deburring machine ELBTALWERK SETr2x350 TGL 16570 Disc diameter Ø max 350 mm Disc width max 40 mm 1,5 kW 1500 rpm 380 V with 2 wire brushes Dimensions: 810 x 450 x 1220 mm
Two group sander ideal for deburring, rounding edges and obtaining a perfect finish, thanks to the initial abrasive belt for removing excess burr and a carousel group with 8 abrasive brushes that rotate both clockwise and counterclockwise for a uniform result on the whole piece. The perfect machine for an excellent finishing quality. Independent control of the work groups via electronic touch screen panel, variable speed of the groups for a better finishing result. Table with vacuum system to guarantee the seal of the piece during processing. Quick release system for changing brushes and belt. The staggered arrangement of the brushes means allow that during the rotation the piece is always processed all over. Also suitable for processing surface treated material. Technical Specifications: - Working Width: 1350 mm - Abrasive Belt Speed: 1370 mm x 2200 mm - Abrasive Brush Dimensions: 300 ...
Thread cutting machine, pipe thread cutter -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos -Dimensions: 270/250/H75 mm -Weight: 2.7 kg
Vibrator 2 tubs WALTHER TROWAL type TA 2/145 Internal tub dimensions: L 840 mm x W 360 mm x Depth 470 mm Coating in good condition Loading from the top Unloading of parts through the front traps Functional machine Voltage: 380 V Dimensions (L x W x H): 2600 x 2000 x 1300 mm Weight: approx 4 T
Deburring of sheet metal edges using rotating stainless steel brushes up to sheet thickness 6 mm
Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: RSA, Deburring machine type Deburrer DUO -Drive: 2.4/3.7 kW / 1500/3000 rpm -Brush: Ø 255 mm -Brush width: -Dimensions: 440/945/H1185 mm -Weight: 277 kg
max. wheel diameter:40-200 mm total power requirement:31,3 kW weight of the machine ca.:4 t dimensions of the machine ca.:1,8 x 2,2 x 1,8 m
Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg
A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible.
Product: ROLLER'S Rondo 8–35 deburring machine (8–35 mm) The model is an inner and outer tube deburring for: Stainless steel pipes, steel pipes Copper, Brass Aluminium Plastic pipes Technical data: Tube diameter: 8–35 mm Material: Metal housing/hardened cutting edges Weight approx. 220 g Features: Many specially hardened cutting edges → easy, fast deburring For external and internal deburring Solid and durable Non-slip housing, chatter-free working
A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available.
4x 10 pieces tyrolit 115x7x22.23 mm aluminum; 10x 10 pieces of sait 115x6x22.23 mm stainless steel; 8x 15 pieces sait 150x6.5x22.23 mm metal; 1x 20pcs power cut 180x7x22.23 mm stainless steel; 1x 4 pieces sait 180x6x22.23 mm metal; 1x 4pcs PS-Forte 230x7.2x22.23 mm stainless steel steel; 3x 10 pieces of sait 125x3.2x22.23 mm stainless steel; 5x 25pcs power grind 230x7.0x22,23 mm stainless steel (not in the picture); 20x 10 pieces of 115x2.5x22.23 mm stone stone;
equipped with 4 deburring / polishing drums with lid, on motor, power: 1 KW, 4 ProMinent beta/4 dosing pumps, 2 SIEMENS SIMATIC Toch operator panels on aluminium frame
Deburring machine>br>speed 1500/3000rpm>br>roller diameter max. 250mm>br>motor 2.0 / 3.0KW>br>incl. 7 brushes >br>condition: untested (6)
A specially built Eiberle reaming machine for pipe blanks is available. Stations: 4, cycle time: 3-5min, machine dimensions X/Y/Z: approx. 3900mm/1050mm/1900mm, weight: approx. 1500kg, control: Siemens, part counter: 40317, including a comprehensive tool package. Documentation available. On-site inspection is possible.
diameter: 180 mm workpiece length: 0 mm work piece width: 1350 mm total power requirement: 65 kW weight of the machine ca.: 7.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working width: 1380 mm workpiece height: 70 mm : total power requirement: 45 kW weight of the machine ca.: 5.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sheet metal deburring machine>br>- ESA touch panel>br>- incl. turbo separator>br>- incl. 3m feed table>br>- spare belts>br>- documentation>br>workpiece width 900 mm>br>workpiece height - max. 40 mm>br>feed speed mm/min>br>workpiece length 0 mm>br>control>br>total power requirement 35 kW>br>machine weight approx. 3.7 kg>br>Dimensions LxWxH 6.0 x 2.35 x 2.2
Year of manufacture: 1965, Serial number: 702, Voltage: 230 volts; Equipped with: rotating table, speed adjustable from: 0-220 / rpm, including Bosch GGS28LC2 grinder, pneumatically controlled.
diameter: 0 mm workpiece length: 1000 mm work piece width: 875 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC deburring/brushing cell, tool magazine, SIEMENS 510, 5 axes CNC Controlled Flexible Brushing and Deburring Cell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pero Washing Machine 2600/016GR.2W-4667
SHL Robot Deburring, Brushing and Grinding System to the system: KUKA Industrial Robot KR-30, SHL Grinding Machine Type - SHL-EKS 250/450/150-2-S-RH-LH, SHL Polishing Machine SHL-DP550-T24, SHL Tool-Station SHL-DP550-T24, SHL Tool-Staion No.2 SHL--DP550-T24, SHL Loading and Unloading Table SHL-BET2-605895, SHL Stem with Lifting Door Type 600 The facility has been cleaned and preserved.
- Power consumption: 26 kVA 3P400V /N/PE/50HZ; Fuse 63A - Compressed air connection: min. 5bar, max. 7bar - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa min. 20 m/s, run-on time 15s The plant was cleaned, packed by the manufacturer, preserved and stored. It is complete and ready for operation. The facility can be visited at any time, by appointment.
This LISSMAC SBM-M 1500 B2 deburring machine was manufactured in 2014. Ideal for efficient deburring applications, it ensures consistent quality and performance. Consider the opportunity to buy this LISSMAC SBM-M 1500 B2 deburring machine. Contact us for more information.
Deburring machine>br>speed 1500/3000rpm>br>roller diameter max. 250mm>br>motor 2.0 / 3.0KW>br>incl. 7 brushes >br>condition: untested (6) Auction-ID: A7-44817-68
Disc diameter 250mm>br>speed 1500/300rpm, 3.1 KW>br>incl. 4 discs>br>see pictures >br>condition: untested (6) Auction-ID: A7-44817-115
maximum number of results exceeded
please refine your search
1.000 € 
