136,826 used machines on RESALE, but how to find them? Machine Search
Press-fit device for ceramic pins in rotor shafts Principle: The ceramic pins are fed to a test station via a pneumatic hose by means of a vibrating conveying bowl, where the position of any single-sided bore is checked. This is done with an optical sensor. Wrongly positioned parts are conveyed through a pneumatic slide into a collection container. Pins that are correctly positioned are fed through another pneumatic hose to the separator of the press-fit tool. The actual press-fit process is also carried out pneumatically with a roller bearing guided punch. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too easily into the shaft. With a pressure p2, which can also be adjusted manually, the pin is then pressed into the rotor shaft at full stop. A 5,000 N preloaded disc spring package prevents excessive force from being exerted on ...
Drilling diameter 3-25 mm in ELB Drilling depth in one stroke (mm) 810 with resetting 1,200 Tapping up to M20 – larger by milling Manual tool changer Spindle holder SK 40 altv. HSK 63 Drive power 5.5 kW / ED 100 Travel X (longitudinal) 1,050 mm Travel Y (vertical) 800 mm Table load up to 2,500kg Table size 1,000 x 1,500 mm CNC rotary table 0-360° manual
Syspal fully enclose tote bin tipper Fully working 16a 3 phase plug 2m tip height All failsafes
used
Max Drilling diameter : 46 mm Max Drilling depth: 1000 mm Table dimensions: 1200 x 700 mm x mm Spindle speed 4000 rpm Spindle power: 7.5 kw
used, almost new Leica Sprinter 250M digital leveller with accessories see photos, stowed in the hard case 1.2x0.6x0.42 m with wheels.
Multivac R 230, year of manufacture 2001, film width 355 mm, draw-off length 210 mm, free loading section of 1,6 m, MC96II control with LCD monitor, 10 mm side trim, two cross-cut guillotines, height-adjustable discharge conveyor, central chain lubrication, new servo inverter for chain feed, Vario tool with interchangeable formats. Format: 1.1 . 335 mm x 210 mm 2.1 - 167.5 mm x 210 mm 2.2 - 167.5 mm x 105 mm 3.1 - 111.66 mm x 210 mm Total length of the machine 5,15 m Operational and wear parts replaced.
Power: 650 Watt tank capacity: 5,5 l length: 515 mm width: 430 mm height: 825 mm weight of the machine ca.: 36 Kg Professional 650 watt construction dryer Recommended room size 40 - 50 m², height max. 2.6 m Sound pressure level approx. 52dB Dehumidification capacity 28 L/D - 51 L/D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
RSA NC-V 2000 Deburring Machine + Pipe Washer + Coral Filter Complete industrial tube processing and post-treatment line The plant consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to max. 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous pipe washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge Filter Extraction System Power: 4 horizontal high-performance filter cartridges with fully automatic Jet-Pulse compressed air cleaning (very low-maintenance). Function: Reliably extracts brush dust, sanding residues or fumes from the car wash. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine that has been special ...
Maja Skinny II, skining and derinding machine, CE-conform execution, year 2019, power supply: 3 Ph, 400 V, 50 Hz, 2.0 A, 0.75 kW, cutting width 434 mm, with infeed conveyor, net weight approx. 190 kg, refurbished condition
range L-W-H: 390 x 270 x 760 mm corner cutter: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Demolition shears, demolition pliers, hydraulic demolition shears -Demolition shears: Hydraulic demolition shears, without hydraulic power unit -Opening width: 290 mm -Transport dimensions: 950/800 (H140 mm -Weight: 94 kg
Dimensions (L/W/H): 97x83x131 cm accessories and equipment:: 1 for PM 74 and SM 74 +version never ussed! include new rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. paper size: 102 x 142 cm dimensions of press (L x W x H): 250x190x220 cm weight: 250 kg serial no.: M-0514-005-05/05-08 frequency: 50 Hz voltage: 400 V palletising unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cito System for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial no.: 1800 Dimensions (L/W/H): 70x70x120 cm Wire-O-System (closer only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Zelfuitlijnende draaiinrichting één aangedreven eenheid één niet-aangedreven eenheid WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 10 ton Number of wheels: 8 wheels Coating material on wheels: rubber
DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, in working condition
GEA Westfalia UCA 450-00-02 centrifugal decanter manufactured in 1998, equipped with a complete flocculant preparation and dosing system. The equipment has a product feed pump, flocculant dosing pump, flocculant concentrator pump and auger for solids discharge. Includes electrical panels, maximum speed of 3,000 rpm and capacity to work with sediments of up to 2,000 g/dm³. It comes with an operating manual, electrical diagrams and a list of spare parts. Technical characteristics Model UCA 450-00-02 Year of manufacture 1998 Maximum speed 3,000 rpm Maximum sediment density 2,000 g/dm³ Equipment Setup Electrical panels Product Feed Pump Flocculant dosing pump Flocculant concentrator pump Complete flocculant system Screw for solids discharge Documentation Operation Manual Electrical diagrams Spare parts list Product Type Sludge In your state
Siemens combined X-ray recording and fluoroscopy device Iconos R 200 with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0,6/1,0 Digital image processing Fluorospot Compact Sirecon 33-4 HDR image intensifier • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • The installation, commissioning and configuration of the system or system components must be carried out by the manufactur ...
SOUND TOP ENERGY 250 – COSTAN + MIAMI 250 AHT ADVS Built-in refrigerated wall suitable for placement above freezers. Increase in sales space while maintaining the same footprint on the ground. Used and REFURBISHED product. Latest generation products, LED lighting and years of production from 2016. Dimensions: Length: 250cm Depth: 110cm ( included the freezer Miami 250 ) Height: 230cm Technical details: Equipped with Automatic Defrost Inverter. R290 Propane Gas. LED Lighting. Plug-in with Shuko plug. Operating temperature: BT -18C° / -25C° | TN +2C° / +6C° Net capacity: 1450 Lt. ( total capacity Sound Top 250 + Miami 250 ) Power input: 220 Volt. All the items are sold refurbished, tested and ready for use.
Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.
Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.
Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT tested but not cleaned and refurbished.
Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami is tested but NOT REFURBISHED
Can depalletizer Kahl & Schlichterle type can DP 20000 capacity: up to 20.000 cph The palletizer is adjustable for one pallet size (has to be clarified) incl. manual loading per forklift construction in stainless steel pallet lifting system automatic carboard layer removal layer magazine control panel incl. Siemens S 7 The can depallitizer will handle two pallet formats and five different can sizes
Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg
- Capacity: 10 – 17 to/h - Height-adjustable feet: 500 – 1050 mm - Very little use of the machine - In very good condition
Max. moulding area: 38 x 50 cm electrics - voltage/frequency: 230 V/Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FLADDER 200/GYRO-1000 VAC deburring machine was built in 2018 in Denmark by Fladder Danmark A/S. The machine, designed for the precise removal of burrs, edge rounding and surface finishing of metal parts, is an excellent solution for both small and large production plants. The combination of proven solutions with reliable components ensures high machining repeatability over the entire service life. The finishing process is performed fully automatically by conical 6 spindles, arranged in pairs on a gear head. The spindles simultaneously rotate around their own axes and perform an orbital movement, enabling machining in all directions. This design guarantees a uniform surface finish regardless of how the workpiece is positioned on the conveyor belt. Each spindle is additionally equipped with the Lock-it system, which facilitates the fitting and balancing of the abrasive brushes. The ...
Length 3500 mm Stainless steel structure Complete with - Side guides - Support feet - N° 2 adjustable speed motors - Chains width 82.6 mm - Motorized device with idle rolls for round bottle sliding
used
Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014
Skinning machine Maja Type: ESB 3441 Power: 1.1 kW Voltage: 380 V Dimensions: 70x114x95cm Delivery time: 10 working days after advanced payment
used
Unscrewer / Uncorker, Fabr. Rink, type: KM 740/2K E QL, box unscrewer/uncorker, 2-head for screw cap, with 1-head decorker plate, already removed and stored.
The scope of delivery includes: 01x Depth bridge, used Manufacturer: Nedcon Material colour: sendzimir galvanized Truss support: approx. 40 mm f. Stand depth: approx. 800 mm Total length: approx. 802 mm Clear span: approx. 709 mm Profile dimensions: C:60 x 50 x 12 mm Material thickness: approx. 2.00 mm Weight/ piece: approx. 1,983 Kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
MEMBRANE SKINNERTOWNSEND, MODEL: 1520 Technical description: Serial number: 140 Year: 1998 Working width: 380 mm Power supply: 220-240 V/50-60 Hz Dimensions: 700 x 530 x 990 mm
RA1787 SLP depth supports / depth bar, galvanized, L = 1.100mm Support of the pallet center runner for transverse storage. 2 pieces required per pallet storage location. Also suitable for storage of skeleton containers. More than 100 pieces in stock - please ask for the required quantity! Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
A two-station tube deburring machine is offered. Tube diameter: 8mm. Processing stations: 2. Including deburring tools and control cabinet. An on-site inspection is possible.
The scope of delivery includes: 01x Depth bridge, used Shelving system: SSI Schaefer Material colour: RAL 5010 blue Overall length: approx. 1,065 mm f. Stand depth: approx. 1,050 mm Clear span: approx. 946 mm Profile dimensions: U 50 x 50 x 3.00 mm Truss support: approx. 54 mm Unit weight: approx. 3.75 kg The depth web can be used for the following truss profiles: INP: 80 x 42 mm IPE: 80 x 46 mm INP: 100 x 50 mm Box profile widths: - 40 mm - 50 mm General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
DMWM TEM IGNITION SYSTEM TEM-ZS1 Ignition device DeutzMWM Part No. 12298101
Heinzmann Actuator StG 30-10 Serial No. 1108034154-30
Ignition device for Jenbacher Manufacturer: WOOD WARD Model: IC-920 Serial No.: 15119859
Ignition device for Jenbacher Manufacturer: WOODWARD Model: IC-920 Serial No.: 15152511
Grasselli C35.P Derinder Q14S05/P406 Year: 2020 400V 3 phase plug 2 x Available
Inv. Num. : 6870 Type: M950 Producer: SCM Created: 2017 Parameters: Weight: 2200 kg
Inv. Num. : 7365 Type: B3N-6000 Producer: TBT Tiefbohrtechnik Created: 1991 Parameters: Control system: Siemens Maximum turning diameter: 8.5-63.5 mm Spindle power: 270 kW Bed length: 17000 mm Maximum drilling length: 8000 mm
maximum number of results exceeded
please refine your search
