dc used for sale

Scania AT-Motor Type=DC12-60A Pump-Nozzle-Motor with EMS Control max.337KW at 1,800rpm > Fixed speed motor. Incl.Anlasser+alternator suitable for vegetable oil and palm oil. Immediately available from stock! Also suitable for vegetable oil operation. info@miw-zeven.de

NEW diesel engine Scania Dc13-72A incl. Starter to exchange give old Scania engine DC12 Power: 1500/1800 326/372 kW MIW GmbH Motoren-Instandsetzungs-Werk North-West-ring 8 D-27404 Zeven/Germany Tel:0049(0)4281 950583 Fax:0049(0)4281-950585

I ´ checker advanced type DC70A Technical data: Supply voltage: 18... 26, 4 VDC Power consumption: max 37 Operating temperature: - 20-85 ° C Measuring range: 70A(DC) Accuracy: < 2% typical < 3% Max Protection class: IP20 Mounting: DIN rail -Suitable for DC and AC -RS 485 bus connection via RJ45 -Hutschienenmontange LED indicator -Optical failure Price per piece 50.00 29 STK. in stock

We offer completely overhauled Scania DC09-74A (#6740881) AT-engine for Doosan dumpers on request with starter, alternator and belt drive in exchange ex works Zeven with 12 months warranty. Old engine must be free of breakage, cracks and repairable and returned to us free of charge within 14 days.

Techno Pack double Clipper DCA E 200 fully automatic coffee machine with hanger loop dispenser Fill caliber up to 65 mm

Scania diesel engine for generator drive, DC13-073A; Variable continuous power (PRP) 326 kW at 1500 1/min. (New)! Retail price: 19.000,00

New engine Scania DC13-072A with Starter without altenator available for genset operation in chrusher immediately at stock Zeven/Germany Phone:0049 4281 950583 fax :0049 4281 950585 infoatmiw-zeven.de abc.miw-zeven

Key data: 439 , 1500

Engine is a general-overhaulted exchange engine with 12-month guarantee. 1x at stock one available. MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven Germany Tel:0049 (0)4281-950583 Fax:0049 (0)4281-950585 email:info@miw-zeven.de abc.miw-zeven.de

Sehr geehrte Damen und Herren, wir sind Scania OEM Partner und bieten komplette Instandsetzungen und Wartungsdienstleistungen Ihrer BHKW Motoren an. Wir überholen auch Zündstrahlmotoren des insolventen Herstellers Schnell AG. Gerne hören wir von Ihnen! Mit freundlichen Grüßen J. Hilchenbach

M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions

Qty. 2 Second-hand stainless steel tube production lines Stainless steel tube mill plant for production of dia. 48.6 mm x 3 mm - 2 lines Brand: Hyundai Precision Type: Tig welding type (DC 600 A) Built: 1994 Revamped: 2020 Roll stand a reducer (changing of bearing ) New welder New heat treatment system for NO 1 mill only! New conveyor & packing system New bead grinder (wheel type) for No 1 mill New electrical panel Mill speed: 3.5- 4 m/min Product pipe: Stainless steel pipe Structural pipe (ASTM A312, JUST 3459, KS D3576 (205/pressure pipe) Strip Width: 152.6 mm (max 170 mm) Thickness: Max 3 mm Pipe dimensions: Dia.: 12.7 - 48.6 mm Length: 6,000 mm Coil weight Max 2 tons Tools: (8 sets) 12.7 ømm 15.8 ømm 21.7 ømm 22.2 ømm 28.6 ømm 34 ømm 42.7 ømm 48.6 ømm

Wir verkaufen einen generalüberholten DC12 54A Zündstrahlmotor mit komplett neuen Teilen. Der Motor wird vor Auslieferung aus unserem Werk noch einmal auf unseren Prüfstand gebracht.

Material width until 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. With circulating air up to 120°C Dryer length 2 x approx. 2.2 m Thermo oil  ...

Machine type: TIG inverter welding system gas-cooled direct current system Make Eurotronic Type TIG 1501 - DCi Connection voltage 1 x 230 volts Setting range 5 – 150 amps Duty cycle 35 % d.c. at 150 amps 60% d.c. at 120 amps 100% d.c. at 100 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly line design Fuse 16 amps Dimensions L x W x H 400 x 170 x 250 mm Weight 9 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece ME-TIG burner TH 161 G, 4 m 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 12 Months Warranty 1 Piece Instruction Manu ...

We offer for fast CHP Scania DC12-16 motors/hull motors in exchange. MIW Motoren-Instandetzunsg-Werk GmbH North-West Ring 8 D-27404 Zeven/Germany E-mail= info at miw-zeven

We are stocked for CHP Fast with Scania Motor DC12/16 fuselage motors. MIW Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven/Germany e-mail: info at miw-zeven

; Mileage [km]: 8; Power [PS]: 480; Accessories: Turbo; Amount of previous owners: 1

; Mileage [km]: 6; Power [PS]: 290

; Mileage [km]: 8; Power [PS]: 450

Scania DC12 crankshaft reon used+tested and ground for all models Scania DI+DC 12 motors Number: 1743584/2176830/10574410

Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request

x-travel: 500 mm y-travel: 500 mm z-travel: 350 mm table surface area: 800 x 450 mm spindle taper: ISO: 40 quill stroke: mm feed - longitudinal/cross: mm/min feeds vertical: mm/min turning speed range: max. 3150 U/min voltage: 380 V / 50 Hz power capacity: 4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description GILDRESS

Description GILDRESS

1 pc. Dassler high-pressure centrifugal fan is for sale single inlet with sheet steel housing with the following performance parameters: condition: new, unused type: DCAS-852-2T-10 suction DN: 280 power: 7.5 kW air volume: approx. 4300 m3 / h speed: 2800 rpm air temperature conveyed: -20 to + 120 ° C motor: insulation class F / protection class IP55

Description GILDRESS

DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Headliner (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-handed operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit, which is rigidly connected to the load handling device, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane Chain Hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: laterally 3 meters and forward/backward 2 meters Steel beams: included in the offer Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Su ...

Code 5284 UMSCHREIBUNG CNC Bohrmaschine Fabrikat Okuma Typ DCN - 4 Maschine Nr. 55020239 Steuerung OSP - 330 Diameter Aufspantisch (4x) Ø 400 mm Einbauhöhe Tisch-Spindel 400 – 200 mm Spindel Hub 200 mm Schnellgang vertikal 12.000 mm/min. Vorschübe 5 – 1200 mm/min. Spindeldiameter 45 mm Spindelaufnahme MK 3 Anzahl Spindelstufen 8 Stufen Geschwindigkeiten 125 – 3150 UpM Anzahl Werkzeugaufnahmen 10 St. Motor 1,5 kW 380 Volts Maschinemasse ( L x Br. ) 1540 x 1750 mm Höhe 2100 mm Gewicht 2000 kg Zustand normale Zustand

; Power [PS]: 538; Engine: Scania DC13 320A 02-63; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 370

Fluid Bed Dryer Type: DCRVF1200x7 Rationale: The material to be dried is placed on the inflow floor and fed there from bottom to top with the Drying air flows through. As a result, the good is heated with constant vibration and the moisture driven out. The vibration prevents the formation of bubbles in the fluidized bed of fine-grained products as well as the Segregation for products with a broad grain spectrum. The vibration also loosens up coarse grains and an almost complete emptying of the entire body. The dwell time of the product can be reduced by adjustment of the vibration. Specifications: Dryer width: 1200 mm Overall length: 7.0 m Length of the dry zone: 4.25 m Length of the cooling zone 2.75 m Tilt: horizontal Execution: · Air flow trough in welded steel construction with the necessary inlet and outlet openings · Exhaust hood with expansion zone, the necessar ...

(Printing, copying, scanning) with brochure finisher M. No.: TA-2004/251 Power : Color: up to 50 pages / min. in A4 Black: up to 65 pages / min. in A4 Paper Size: Trays 1-2: Size: Custom to A3 Tray 3: Format: A4; Tray 4: Format: A4 Bypass Tray (Tray 5): Size: Custom up to SRA3 and 13 x 19 inches Paper Weight: Trays 1-2: Paper Weight: 64 to 220 g / m2; Bypass Tray (Tray 5): Paper weight: up to 300 g / m2 Duplex: Yes (1-1, 1-2, 2-2, 2-1) Document feeder: Duplex document feeder for 250 sheets Print volume: Max. 200,000 pages per month Equipment / Additional information: With RIP Copying Copy resolution: 2400 x 2400 dpi Reduce / Enlarge: 25% - 400% Printing Technology: laser printer Print resolution: 2400 x 2400 dpi 2-sided: standard Scanning Scan resolution: 200 x 200 dpi, 300 x 300 dpi, 400 x 400 dpi, 600 x 600 dpi Electrical connection: 230 V, 50/60 ...

; Gross weight [kg]: 13000; Engine: DC16 320A 02/63; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 2500

A dust absorber is a device that is connected to the ventilation system. Its function is to extract suspended particles. This task is fulfilled by the fan and filters built into the device. Using a dust absorber improves air quality, making it easier to keep the machine clean. As a result, the life of the device is extended. Using it is also safer for the environment and the health of the operator. Specifications: Power supply: 400V AC 50hz Capacity: 3000-4000 m³ Rated power: 7.5kw Filtration area: 40 m² Number of filters: 4 pcs Filter size: ⌀325mm Filter height: 660 mm Weight: 400 kg Height: 1980 mm Width; 1000 mm Depth: 1000 mm

GRAFOTRONIC DCL2, Age: 2017/2018  Manufacturer : GRAFOTRONIC  Year of Installation : 2017 with Upgrade 2018  Max. width: 350mm  Unwinding diameter: 1000mm  Web edge control  Semi rotary printing unit  GEW Drying UV  Semi-rotative die-cutting / drawn onto sheet metal  Laminating  Cold foil stamping  Labelshifter  Punching length: 609.6mm  Lattice proofing  manual knife box  Automatic Turret  2 x Spindle

; Gross weight [kg]: 13000; Engine: DC13 320A 02/62; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super silent Canopy; Water Tank Volume [l]: 2500

; Gross weight [kg]: 5500; Engine: DC 09 320 02/61; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 1200

Control cabinet with Keyence CV-5501P, CA-DC20E, CA-MP81, CA-D3R, CA-CN3 Rittal SK 3201.300 and Rexroth R911170402-102 as well as Murr Elektronik 54205 CV5501P, CADC20E, CAMP81, CAD3R, CACN3, SK3201.300, R911170402 102, Control Box, Distribution Box, Distribution Cabinet, Manifold, Cooler, Refrigeration Unit, Imaging, Camera, Camera Cable all other installed parts are included in the scope of delivery (see illustrations) Total dimensions (with Rittal cooler):Width: approx. 45 cmDepth: approx. 23 cmHeight: approx. 45 cm Total dimensions (without Rittal cooler, only the cabinet itself):Width: approx. 30 cmDepth: approx. 23 cmHeight: approx. 40 cm Modules:Keyence CV-5501P digital image receiverKeyence CA-DC20E expansion unitKeyence CA-MP81 monitor screenKeyence CA-D3R cable for LED lightingKeyence CA-CN3 cable camera cableRittal SK 3201.300 thermoelectric cooling unit (100 watt cooli ...

Key data: 451 KW, 1500 1/min

Year of manufacture 10/2020, engine in running condition and has only a slight leakage at the oil pan. A total of 11,000 operating hours.