dc motor used for sale

Description Format 66 x 84cm DCT Control Inclined roller table Ruler position as 3rd. Movement with 4 pockets 66cm and downstream knife shaft

In- and outlet on the right side set to 28 MCA 6 heads Capacity: about 10.000 bph amount of capping heads: 6 capacity / hour ca.: 10000 working direction: rotating turret Drive: Treibriemen / variabel

; Gross weight [kg]: 3665; Engine: Scania DC09 072A 02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 480

Manufacturer: Rieter Model: Scragg DCS1200 Type: Texturizing Machine Year of manufacture: 1990 General renovation: 2012 Condition: Used Quantity available: 2 machines TECHNICAL SPECIFICATIONS - 216 spindles - Oiling device - Air jets for intermingling - Yarn brake sensors and cutters - Take up tube: 285 mm x 67 mm inner bull nosed Find more here - .ucymachines/ Contact us at - sales@ucymachines

; Gross weight [kg]: 3815; Engine: Scania DC09 072A 02-14; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 525

; Gross weight [kg]: 4924; Engine: Scania DC13 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 760

; Gross weight [kg]: 5029; Engine: Scania DC13 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 760

; Gross weight [kg]: 6265; Engine: Scania DC16 078A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1160

; Gross weight [kg]: 6160; Engine: Scania DC16 093A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and Battery charger; Water Tank Volume [l]: 975

This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2010. It features an X-axis travel of 560 mm, Y-axis travel of 560 mm, and Z-axis travel of 630 mm. The machine has a spindle speed of 14,000 rpm and a tool magazine capacity of 60 positions. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH 4000 DCG horizontal machining centre we have for sale. Contact us for further details.

PART NUMBER 7991 SPECIFICATIONS - max blade diameter 400mm - blade hole diameter 30mm - shield cover - Adjustable arm up/down - max cutting height 120mm - max cutting width 540mm - hydraulic saw movement - 3 introductory rollers in the countertop - 3.7kW motor - hydraulic pump motor about 0.55kW - Diameter of the extraction port 110mm - roll width 530mm - machine dimensions l/w/h 1900x1500x1950mm - weight 650kg ADVANTAGES – Polish production – DTR documentation – very good condition – used saw Net price: 13900 PLN Net price: 3310 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

We sell 16 x Brocade DCX8510 directors, 80+ x FC16-48 blades, ICL licensed In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbishe ...

Containers, transport containers, steel containers, ISO containers, material containers, workshop containers -Steel container: Workshop container / material container with lighting and workshop equipment -Workbench: with vise -Double grinding machine: -Electrical equipment: see photos -Container interior dimensions: 5940/2330/H2285 mm -Transport dimensions: 6050/2420/H2590 mm -Transport weight: 2800 kg

Stage V Generator, Stage V Aggregaat, Stage 5 Generator, Stage 5 Genset, Stage V Gen set, Stage V Generator set, EU Stage V Generator, StageV; Gross weight [kg]: 5215; Engine: Scania DC13 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, 24 hour fuel tank; Water Tank Volume [l]: 1750

air flow quantity: . m³/h suction power: . kPa power capacity: 2,2 kW Sweat extractionThe techn. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in demand, it will not be used. The machine is in its original packaging and unused. 5 - Axis CNC Portal Milling Machine, New Make : HURCO Type : DCX 32-5 Si Year of manufacture : 2025, Delivery 3 / 2026 Control: MAX 5, 2 screens TRAVELS X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal stand: 2,130 mm Distance spindle nose to table: 66 – 966 mm SPINDLE / HEAD Clevis CYTEC Tool holder: HSK63-A Max. speed: 18,000 rpm Power : 63 kW Max. torque: 106 Nm Rapid traverse: 15/15/10 m/min Tool Changer / ATC : 60 - speed EQUIPMENT : - IKZ internal cooling by spindle 40 bar - KNOLL belt filter system - KNOLL chip conveyor - Di ...

Key data: 451 KW, 1500 1/min

1Scania - Diesel engine for generator drive, type DC16 093A ( 02- 51 ) Prime Power PRP Fuel Optimized 451 kW at 1500 rpm Equipment: Standard motor with: -Exhaust bend 90° with flange -Without fan drive -Without fan and cooling system -Flywheel 14" -Heavy flywheel housing ( cast iron ) -Engine feet, 230 mm, counter-flywheel side -Engine colour orange, exhaust parts unpainted -Closed crankcase vent

Kalmar DCE 60-6 Diesel Forklift with Cab & Heater – 6 t Capacity Reliable and robust heavy-duty diesel forklift from Kalmar, ideal for industrial use in woodworking, logistics or building materials production. The DCE 60-6 impresses with its solid construction, precise hydraulics and excellent visibility. With a fully glazed cab, heating and air conditioning preparation, it offers a high level of operating comfort – even on long shifts and in all weathers. ⸻ Technical data Manufacturer: Kalmar Model: DCE 60-6 Series Series: DCE Year of Make: 2007 Country of production: Sweden Operating hours: approx. 12,000 hours Propulsion: Diesel Engine: Perkins 1104D-E44T Engine power: 75 kW (≈ 102 hp) Transmission: torque converter gearbox Cylinder / Voltage: 24 V system Load capacity: 6 000 kg Load center of gravity: 600 mm Lift Mast: Duplex / Free L ...

Pressure: 10 bar Free air delivery: 41,7 m³/min Measurement (WxHxD): 650 x 2210 x 1040 Weight: 385 kg

Pressure: 16 bar Free air delivery: 5,83 m³/min Measurement (WxHxD): 336 x 1788 x 507 Weight: 92 kg Compressed air connection: 1 1/2

x-travel: 560 mm y-travel: 560 mm z-travel: 630 mm Control: MSX 701 III MAPPS Main spindle:: Max. rpm: 14.000 min/-1 power capacity - main spindel: 18,5 / 11 kW max. Torque: 120 Nm tool taper: MAS BT 40 distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 100 - 730 mm pallet changer:: numbers of pallets: 2 size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm max. workpiece height: 900 mm change time of pallets: 6,0 sec b - axis: 0,001 ° Tool-Presetter:: number of toolpositions: 60 pos. tool taper: MAS BT 40 max. tool diameter: 70 / (140) mm max. tool length: 400 mm max. tool weight: 8,0 kg feeds:: rapid traverse ( X / Y / Z ): 50 m/min feed speeds: 0 - 50.000 mm/min Tipp feed: 0 - 1.260 mm/min total power requirement: 35 kVA weight of the machine ca.: 9,8 t dimensions of the machine ca.: 5,5 x 3,5 x 2,8 m Docume ...

-Noise Rating: 55 dB at 7m; Gross weight [kg]: 1300; Engine: DC13 072A/02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 2500

- Noise rating: 55 dB at 7m; Gross weight [kg]: 1300; Engine: DC13 072A/02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 2500

- Super Silent 55 dBA @ 7 metres, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 13000; Engine: DC16 320A 02/63; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 2500

-Noise rating: 55 dB at 7m; Gross weight [kg]: 5000; Engine: DC09 72A/02-11; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 1200

-Noise Rating: 55 dB at 7m; Gross weight [kg]: 5500; Engine: DC09 072A/02-13; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, , - Stage V version available: DPX--21008, + €34.500; Water Tank Volume [l]: 1200

- Super Silent 55 dBA @ 7 metres, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 5500; Engine: DC 09 320 02/61; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 1200

A complete dental CAD/CAM system with a dental milling machine, 3D dental scanner, CAD/CAM software and extensive accessories is offered. The system consists of a DCS PRECIMILL M4 dental milling machine and a DCS PRECISCAN D4 scanner. Inspection possible by prior arrangement.

A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

pressure: 200 t stroke: 500 mm table:: 1000 - 800 feed down: 150 -280 mm/sec feed under pressure: 10 - 26 mm/sec feed up: 180 - 300 mm/sec table height over floor: 750 mm total power requirement: 22 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-D coordinate measuring machine Measuring range X/Y/Z: 440 x 500 x 410 mm Measurement uncertainty X/Y/Z: 2.5 + 3.9L/1000 μm Max. table load: 227 kg Total weight 293 kg

CNC controller: FS-31IA5 (MAPPS 3) Capacity Z-axis travel mm: 1.550 + 100 Turning length mm: 1.542 Max. turning diameter mm: ø: 660 Swing over bed mm: ø: 730 Bar work capacity mm: 80 / 80 Turning diameter f. lower turret mm: 350 Distance between spindle centers mm: 1.862 Turn-mill spindle X-axis travel mm: 750 Y-axis travel mm: ±210 B-axis degree: ±120° (Index 1°) C-axis degree: 360º (0,001º) Speed spindle rpm: 12.000 Drive power kW: 18,5 / 11 (30min/cont) Tool magazine Magazine places: 100 Tool holder: CAPTO C6 Tool length max. mm: 400 Tool diameter max. mm: 140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Milling function: PROVIDED Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22 / 18,5 (30min/cont) Spindle bore mm: 91 Counter spindle  ...

CONTROLS   CNC controls FANUC 18 MB WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 900 mm   Y-axis travel: 800 mm   Z-axis travel: 980 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° TABLE   table surface (left-right): 630 mm   table surface (front-back): 630 mm   workpiece load (max): 1200 kg SPINDLE / HEAD   spindle type: horizontal   spindle revolutions (max): 10000 /min AXIS DRIVES   rapid traverse: 50000 mm/min TOOL MAGAZINE   number of positions: 140 AUTOMATIC WORKLOAD EQUIPMENT   store type: table changer   number of store positions: 2 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 19000 kg ATTACHMENTS   chip conveyor: yes   coolant unit: yes   ban ...

turning diameter: 600 mm turning length: 1.045 mm control: MSX - 711 III MAPPS III swing diameter over support: 600 mm distance between spindles: 1.255 mm max. bar capacity: 65 mm Main drive 2: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 25 / 22 kW no. of turning speeds: 2 spindle nose: JIS A2-6 spindle bore: 73 mm internal diameter: 120 mm C-Axis: 0,0001 ° chucking diameter: 200 mm Milling Spindle:: Speed range Tool Spindle: max. 12.000 min/-1 Power rating Tool Spindle: 5,5 / 3,7 kW tool taper: Capto C5 internal diameter: 65 mm B - Axis: 0,0001 ° swivellable: +/- 120 ° axis stroke:: x-axis: 685 (610 + 75) mm y-axis: +/- 125 mm z-axis: 1.075 + 130 mm turret:: number of toolpositions: 12 pos. Shank height for square tool: 20 mm Drill shank diameter: max. 32 mm tool magazin:: tools in tool magazin: 40 pos. max. tool diameter: 70 mm max. tool ...

Vertical Saw Viktor DCM4 BJ 1986

Technical data to follow! Currently no TÜV, in need of repair for approx. 2000 EUR. Additional technical specifications: • Loading area: 4000 x 2000 mm

CATEGORY - 5-Axis BRAND - DMG MORI MODEL - NT 5400/1800 SZ DCG WAREHOUSE NO - ONY100000580 YEAR OF MANUFACTURE - 2007 CONTROL UNIT - MSX-701 III AXIS TRAVELS - X1 1,040 MM / X2 267 MM / H ± 255 MM / Z1 1,940 MM / Z2 1,830 MM ROTARY AXIS MOVEMENTS - B ±120° / C 360° MAX. TURNING DIAMETER - 920 MM MAX TURNING DIAMETER - 470 MM MAX TURNING LENGTH - 1.921 MM SPINDLE - 1 SPINDLE SPEED - 2,400 MIN/-1 MIRROR SIZE - 450 MM ROD DIAMETER - 107 MM MAIN SPINDLE SPEED (S1) - 8,000 MIN/-1 HOLDER TYPE - CAPTO C8 SPINDLE - 2 COUNTER MIRROR REVOLUTION - 2,400 MIN/-1 MIRROR SIZE - 450 MM TURRET-2 NUMBER OF HOLDERS - 10 MACHINE WEIGHT - 36.000 KG MACHINE EXTERNAL DIMENSIONS - 4.50 X 6.61 X 3.46 M

x-axis: 2200 mm y-axis: 1700 mm z-axis: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control: WinMax Travel ranges: X/Y/Z: 2200 x 1700 x 750 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Big Plus Drive power: 18/26 kW Tool changer: 40-station Table clamping surface: 2100 x 1600 mm Distance from spindle nose to table: 150 – 900 mm Equipment/Accessories: Workpiece positioning detection and tool length calibration via probe Direct measuring system (X/Y/Z axes) Production package for high-performance chip removal Internal coolant supply (ICS) 20 bar Chip conveyor Coolant system (1050 liters) with belt filter unit Coolant spray gun Chip splash guard enclosure Machine status signal light LED machine light Set of machine leveling pads Parts list and circuit diagrams on CD Programming and maintenance manuals via control help function  ...

Registration date: 28.05.2015, VIN: VF11FL11852823229, Power: 103 kW, Drive: Diesel, Displacement: 1598 ccm, Mileage: 107.200 km, Technical inspection: 09/2027, long version, Manual gearbox, Multimedia system, Bluetooth

x-travel: 730 mm y-travel: 730 mm z-travel: 850 mm control: MSX 701 IV MAPPS 4 Main spindle:: max. spindle speed: 14.000 min/-1 power capacity - milling spindle: 22 / 18,5 kW tool taper: HSK A-63 distance ground floor - table top edge: 1.200 mm distance Spindlenose and center of table: 100 - 950 mm pallet changer:: numbers of pallets: 2 size of pallet: 500 x 500 mm max. workpiece weight: 500 kg max. workpiecediameter: 800 mm max. workpiece height: 1.000 mm change time of pallets: 7 sec Indexing-time: 1,57 sec B-axis (table): 0,001 ° Tool-Presetter:: number of toolpositions: 120 pos. tool taper: HSK A-63 max. tool diameter: 70 mm max. tool-dia with free toolbox: 140 mm max. tool length: 500 mm max. tool weight: 12 kg feeds:: rapid traverse: 50 m/min feed speeds: max. 50.000 mm/min Tipp feed: 0 - 1.260 mm/min total power requirement: 51 kVA weight of the machine ca.: 12 t dimensions o ...

Double Clipper Tipper Tie DCKni 90, Compressed air double clipper, up to caliber 90, Dimensions LxWxH approx. 70x60x80cm, weight approx. 44kg, good used condition, fully functional

Mori Seiki NT 5400 DCG - 1800 SZYear of manuf. : 2009 Control : Fanuc 30i (MSX-711) Turning diam. : 920 mmTurning length : 1800 mm____________Description:In General:Year of manufacture:2009Control system:Fanuc 30i (MSX-711)Max. turning diameter:920 (470) mmTurning length:1,800 mmBar capacity:103 mmMilling spindle:8,000 rpm, HSK 100Main spindle:RPM:2,400Max. power:37 kWMax. torque:1,432 NmC-axis:0.001°Chuck:SMW Autoblok KNCS 500-155Sub spindle:RPM:2,400Max. power:37 kWMax. torque:1,432 NmC-axis:0.001°Chuck:SMW Autoblok KNCS 500-155Tool carrier I (X/Y/Z/B):Technology:Traveling column with milling spindleMilling spindle:8,000 rpmPower:30 kWTorque:302 NmTool holder:HSK 100X-axis:1,040 mmY-axis:510 (+/- 255 mm) mmZ-axis:1,940 mmB-axis:+/- 120°, index 1°Tool carrier II (X/Z):Technology:Cross slide with tool turretTool drive:6,000 rpm, 40 NmNumber of stations:10X-axis:267 mmZ-axis:1,8 ...

Turning length: max. approx. 1000 mm, centre height: approx. 250 mm, with coolant device, machine light, 4-jaw chuck, diameter: approx. 250 mm, hollow spindle diameter: 60 mm