129,377 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Max. size= 0 x 0 cm, Availability= 082023, Air humidification water treatment system DAN FUGT with 2 nozzles LOT Loaded in truck or container
Code: 0001 Brand: DAN - LIST - DENMARK Model: MORSO Pedal-operated guillotine saw for 45° cutting of both sides of frames Technical data: Max width of the rod to be cut cm 10 Max height of the rod cm 16 Length of the right supporting table cm 80 Pair of steel blades Height of support surface from ground cm 83 Measuring system with 3 millimetre scales Overall dimensions of assembled machine mm 1750 x 550 x 950 h Overall dimensions for transport mm 650 x 550 x 950 h Weight kg 90
Semi-automatic short-threaded cutting machine for the production of external and internal thread Gr. via cross slide: 160 mm Gr. via cross slide guide: 240 mm tip wiete 250 mm nSpindle=180-2240 rpm spindle bore: 61 mm gr. threaded length/deep 100/6 mm
pressure: 1000 kg workpiece length - max.: 6500 mm weight of the machine ca.: 600 t dimensions of the machine ca.: 120x30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
4 Used DESMI NSL125-215C/D02 Pumps with Danfoss EM-PMI Motors (2023) We are offering four (4) high‑performance used DESMI centrifugal pumps, model NSL125‑215C/D02, each fitted with a powerful Danfoss EM‑PMI electric motor. All units were manufactured in 2023, have seen limited operational hours, and are in excellent mechanical condition—ideal for marine, industrial, and high‑flow applications. Pump Specifications (DESMI NSL125-215C/D02) Flow rate: 250 m³/h Head: 49.63 mLC RPM: 2967 Impeller Ø: 219 mm Power: 55 kW Pump No.: 524965-01-03 Production year: 2023 Certified with CE and UKCA markings Motor Specifications (Danfoss EM-PMI300-T310 Series) Voltage: 500 V Power: 55 kW Speed: Up to 4000 rpm Torque: 177 Nm Cooling: IC 71 W IP Rating: IP65 Mounting: IM3001 Weight: 125 kg Manufactured: 2023 High‑efficiency permanent magnet motor technology Con ...
Make: Danfoss Type: SZ100S4VC Performer New Vacuum: - Pressure: 25bar - Temperature max: 54C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 32bar - Temperature max: 65C - Temperature min.: -35C - Volume: 3.25 litres
Te Koop: Danfoss 3480-3490 Freqentieregelaar VLT. Type: 3003 175H1011. 380-415 v.
Introducing the Danstoker A-S Boiler – Reliable, Efficient, and Built to Last! Specifications: Model: EEB-W HT Serial Number: 78-6155 Year of Manufacture: 2009 Max. Heat Output: 1005 kW Max. Steam Rating: 6.0 Bar (Design Pressure) Design Temperature: 110°C Test Pressure: 9.0 Bar Water Volume Capacity: 3143 Liters This high-performance boiler is engineered for durability and efficiency, making it ideal for industrial applications. With its robust construction and certified design, the Danstoker A-S ensures reliable operation under demanding conditions. Perfect for businesses seeking a trusted heating solution! for more Details: 07379844145 financeukpowergeneratorsltd.com hashtag#Danstoker hashtag#IndustrialBoiler hashtag#Efficiency hashtag#Reliability hashtag#HeatingSolutions hashtag#EngineeringExcellence Private Notes
Ground precision ball screw, D40 mm, 1200 mm, Danaher, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Sp.Nr. 812250/8, D40 mm, 1200 mm, Z-Nr.: 42.20101.01.3171.00, Fa. Danaher Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 1020 mm Length of ball screw nut 145 mm, Max. total stroke 875 mm, Total length of the spindle 1200 mm Diameter for coupling with motor 30 mm Diameter bearing seat A 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a func ...
Frequency inverter, 15KW, tested, max 2935 load hours, VLT FC-302P15KT5E20H1XG… Danfoss, used Top Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Frequency inverter Danfoss 15 KW, VLT FC-302P15KT5E20H1XGXXXXXSXXXXA0BXCXXXXD0 - Input: 3x380-500V, 50/60Hz, 29/25A - Output; 3x0-Vin, 0-590Hz, 32/27A - The frequency converters have been tested and only have between 1580 and max. 2935 load hours. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any def ...
Frequency inverter, 4 KW, tested, max. 606 load hours, VLT FC-302P4K0T5E20H1XG… Danfoss, used Top Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Frequency inverter Danfoss 4 KW, VLT FC-302P4K0T5E20H1XGXXXXSXXXXA0BXCXXXXD0 - Input: 3x380-500V, 50/60Hz, 9,0/7,4A, - Output; 3x0-Vin, 0-590Hz, 10/8,2A, - The frequency converters have been tested and only have between 105 and max. 606 load hours. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defe ...
Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile gebrauchte Hydraulikmotoren Danffos OMR OMS OMT OMTS OMV used Danfoss OMR OMS OMT OMS OMV hydraulic motors used hydraulic motors Danffos OMR OMS OMT OMTS OMV 151-0208 125 OMR OMS OMT OMTS OMV 151-0242 80 OMR OMS OMT OMTS OMV 151-0243 100 OMR OMS OMT OMTS OMV 151-0244 160 OMR OMS OMT OMTS OMV 151-0245 200 OMR OMS OMT OMTS OMV 151-0246 315 OMR OMS OMT OMTS OMV 151-0247 250 OMR OMS OMT OMTS OMV 151-0248 50 OMR OMS OMT OMTS OMV 151-0265 50 OMR OMS OMT OMTS OMV 151-0266 80 OMR OMS OMT OMTS OMV 151-0267 100 OMR OMS OMT OMTS OMV 151-0268 160 OMR OMS OMT OMTS OMV 151-0270 315 OMR OMS OMT OMTS OMV 151-0271 250 OMR OMS OMT OMTS OMV 151-0297 315 OMR OMS OMT OMTS OMV 151-04 ...
Manufacturer: DANFOSS Type: VLT5350PT5CN1EXR1DLF00A00 Breakdown of the type designation: Model No.: VLT 5350 Suitable for engines up to 315 kW. PT5: Voltage: 500-690 V input voltage. CN1: Cooling option: Standard air cooling (internal). EXR1: Extension: Standard I/O modules (input/output). DLF00A00: Configuration: No additional modules or options installed. DLF stands for Danfoss Factory Load (standard version without customer-specific adjustments). Properties: Power range: 315 kW Voltage range: 500-690 V (suitable for high-voltage motors) Cooling: Air-cooled unit. Control: Ideal for variable speed control applications in high-performance engines.
Danfoss VLT 5027 Variable Frequency Drive 22 kW Manufacturer: Danfoss VLT5027PT5C54STR3DLF00A00C0 C/N: 175Z4141 VLT 6000 HVAC Frequency Inverter IN 3 x 380 - 500 V 50/60 Hz 43.3 A Out 3 x 0-UIN 0-1000 Hz 37.5 A, 44 A 31.6 kVA 22 kW More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Danfoss VLT 6027 HVAC Variable Frequency Drive 18.5 kW Manufacturer: Danfoss VLT6027HT4C54STR3DLF00A00C0 C/N: 175Z7056 VLT 6000 HVAC Frequency Inverter IN 3 x 380 - 460 V 50/60 Hz 37.5 A, 34 A Out 3 x 0-UIN 0-1000 Hz 37.5 A, 34 A 27 kVA IP: 54 More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Used and stored control cabinet, 200 cm wide, 60 cm deep, 220 cm high. 9 pieces Danfoss FU Frequenum Converter, Siemens S7 CPU PLC, Simatic OP17 Touch Panel. Location Castrop-Rauxel. Used and put into storage electric control cabinet, 200 cm x 60 x 220. 9 pieces Danfoss FU frequency converter, Siemens S7 CPU SPS, Simatic OP17 Touch Panel. .
Qty. 1 Second-hand cast house for billet production incl. filtration system Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Built: Unknown The machine is very strong design and still running well because it has been maintained always with original spare parts and qualified experts. Direct casting on a vertical table and make billets of 6'' and 8''. To make 9'' the tool of the table can be modified. The vertical caster can work with 9'' by remachining and modifying the tool table. 1 Melting and Tilting furnace GAUTSCHI, Capacity 20 T, Fuel Oil Burners The furnace has an elevator charging machine to load the scrap from the top of the furnace Degassing unit FILD from MECHATHERM England Nitrogen treatment and filtering 1 Vertical caster for billets 26 x 6’’ and 20 x 8’’ for useful log length 6 m 1 Homogenizing furnace, Fuel Oil Burners Weish ...
The Section Mill was commissioned in 2011 including advanced rolling mill mechanical equipment alongside electrics and automation systems utilizing Siemens-brand technology. The rolling reutilized a minor portion of the equipment of the previous rolling mill standing there. Those are the finishing mill stands, the high-speed shear before cooling bed and finishing cold shear. Designed for a production capacity of 600,000 tons per year, the rolling mill can process either billets, blooms, or beam blanks into a wide mix of beams, sections, and flat bars. It features a 120 tph walking beam reheating furnace, a breakdown reversible mill (BDM), a three stands ultra-flexible reversing mill (UFR), and an eight-stand continuous finishing mill. The facility is further equipped with advanced finishing services, including straighteners, cutting saws, cold shear, magnetic stackers, and strapping ...
hydraulic motor, oil motor, hydraulic pump, hydraulic valve -Manufacturer: Danfoss, hydraulic motor with: valve block -Manufacturer hydraulic motor Danfoss type: OMP 315 151-0033 7 -Valve block: Hawe SK.7356-160/160 -Shaft: Ø 25 x 40 mm -Dimensions: 240/130/H200 mm -Weight: 9.8 kg
Brand-new Sauer Danfoss 11028185 Hydraulic Pump—a high-performance, durable hydraulic component designed for industrial and mobile machinery applications. Model Code: JRR045BLS192 Serial No: S074826737 Max Pressure: Up to 350 bar (verify with specs) Country of Manufacture: Made in Slovakia Ideal for heavy equipment, construction, and hydraulic systems Model No./Ident No.: 11028185 Net weight: 29 kg Manufacturer: Sauer Danfoss Availability: 2 Ncobsv D H Evomy Ex Ipeu
This 4-axis DANOBAT HG 91-3000-B8 was manufactured in 2007. It features a CNC control system by SIEMENS 840 D, a maximum grinding length of 3,000 mm, and can handle workpieces up to 5,000 kg. The machine offers a swivel angle from -30º to +180º and a cutting speed of 45 m/s. Consider the opportunity to buy this DANOBAT HG 91-3000-B8 cylindrical grinding machine. Contact us for more information about this machine.
Hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor -Manufacturer: Danfoss, hydraulic motor with gearbox -Hydraulic motor: Danfoss Type: OMP 50 151-0028 6 -Gearbox: Nord SK 01 FF i= 5.83 -Hole spacing: 106 x Ø13 mm -Shaft: Ø20 x 40 mm -Bolt circle: Ø 100 x 7 mm -Dimensions: 310/140/H180 mm -Weight: 13.5 kg
Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...
Make: Danfoss Type: SZ175S4RC Performer 3 pieces New Vacuum: - Pressure: 25bar - Temperature max: 63C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 31.9bar - Temperature max: 65C - Temperature min.: -35C - Volume: 2 litres
Frequency inverters of Danfoss Type: HVAC-drive VLT6000 Power: 5.5 kW Protection class: IP54 Frequency converter is fully functional and can be visited at any time. Shipping is also possible!
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Danger Type : WM 52 plates YOM : ca. 1980 electrical : 380V 3Ph. ca. 3 KW heating : natural gas or propane waffle sheet : 460x290 mm, deep karee different : automatic sheet take off with wafer cooler We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked
Te Coop: Danfoss Druk druk transmitter MBS 3000 0-6 bar
Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition
Code 61062 Description Hydr. Surface grinding machine Make DANOBAT Type RTS - 1600 Machine No. 16 220 Manufacturing date 1975 Table size 1800 x 550 mm Grinding dimensions L x W x H 1600 x 600 x 650 mm Magnetic plate size L x W 1600 x 550 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 750 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 15 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 10.000 kgs Total power 20 kW – 380 Volt Accessoiries Electro magnetic plate 1600 x 550 mm from Tecnomagnete Coolant Vertical grinding spindel Condition Machine is in good condition
Code 81199 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 504 Manufacturing date 1987 Table size 1400 x 450 mm Grinding dimensions L x W x H 1200 x 600 x 450 mm Magnetic plate size L x W 1200 x 450 mm Table speed movement 1 - 30 m/min. Max. distance table surface – centre grinding wheel 675 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1200 rpm Spindle power 7,5 kW Grinding wheel size Ø 450 x 50 ( 100 ) x Ø 127 mm Weight 6000 kgs Size of machine 3250 x 1850 x 2600 mm Total power 19 kW – 380 Volt Accessoiries Electro magnetic plate 1200 x 450 mm from Tecnomagnete Coolant Pendel control Condition Machine is in normal condition
Code 171305 Description CNC surface grinding machine Make DANOBAT Model PSG - 1000 Serial No. 30102 A Control Fanuc 210i - M Year 2001 Tablesize 1000 x 500 mm Grinding surface L x W x H 1000 x 600 x 450 mm Long ( X axes ) 1150 mm Cross ( Z axes ) 500 mm Speed table movement 1 – 30 m/min. Max. distance table – centre grinding wheel 650 mm Max. workpiece weigth 1500 kg Max. table load 1500 kg Magnetical plate size L x W 1000 x 500 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 100 x Ø 127 mm Spindel power 7,5 kW Spindel speed 1500 rpm Motor power 7,5 kW – 380 Volt Total electr.com. 20 kW Total space L x W x H 3950 x 3150 x 2550 mm Weight 5500 kgs Accessoiries Elec. Magneticplate 1000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in g ...
Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition
Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts
Magazzino DANOBAT 3 mt. 15 postazioni Circa 15 aanni
Danfoss FC-102P45KT4E20H1XG 45kW/60HP 131F0340, 3x380-480VFrequency Converter Item Condition: Used Bfisefoc2cy 60kg More items - new and used - can be found in our shop! International shipping costs on request!
Daniels 500ton Upstroking Press Platen 1050mm wide x 1100mm deep Capacity in Tons: 500 Working pressure Lbs: 2950 Daylight between tables: 24"/30" Daylight between platens: 18"/24" Stroke (main ram): 24" Main ram dia. : 22" Side ram dia. : 3 1/2" / 2" 4 columns Return Ram Steam heated platens New light guarding Fast / slow close Complete with pump unit and brand new control panel
Vehicle data: Make: Dana, Type: Spicer 13,7 HR32312-632X, Drive type: None, \Year of construction: 0, Internal number: DIV1201-1, Mast data: Dimensions: Battery & charger: Description & special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description:
Danfoss VLT Aqua Drive Inverter FC-202P45KT4E20H1XG 131H3207 45kW 3x380-480V Item Condition: Used 55kg More items - new and used - can be found in our shop! International shipping costs on request!
Danobat RTM-2500 CNC X600 CNC Surface Grinder Grinding Length: 100" Grinding Width: 28" Table Length Dimension: 98.43" Table Width Dimension: 19.690" -Grinding Wheel- Grinding Wheel Diameter: 20" Grinding Wheel Width: 4" Grinding Wheel Bore: 8" -Wheel Head- Angle Adjustment: 0 DEG Wheel Head Motor: 20 HP Wheel Head Speed: 1,200 RPM -EQUIPPED WITH- Fagor 8055 CNC Control Magnetic Swarf Conveyor
Original Danfoss frequency converter 1,5 kW 2,2 kW and many more
Danmatic Spray unit spray glazing machine 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph
Danmatic Decor Unit 900 topping conveyor 2018, Stainless, décor unit 900, is designed for decoration of buns, rolls, full dough sheet products and more, brand new HMI touch screen Siemens panel, belt dimensions 2600mm x 880mm, mobile, 3Ph
Key data: 2200 t
Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters
1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...
FN Steel high‑capacity hybrid rolling mill - continuously modernized through major upgrades - delivers wire rod and bar‑in‑coil from Ø 5.5 mm to Ø 30.0 mm at speeds up to 100 mps. Combining technology from the three major OEMs, it offers speed, flexibility, and quality for the most demanding markets. ‘SMS-PRIMETALS-DANIELI’ High Speed Wire-Rod & Bar-in-Coil Rolling Mill Highlights Wire-rod (‘Morgan line’): Ø 5.5 –16.0 mm with pre-finishing and reducing sizing mills Bar in Coil (‘Garret line’): Ø 16.5 –30.0 mm with two coilers for higher output On-line Heat Treatment: water boxes and temperature-controlled cooling conveyor to achieve desired microstructures Capacity: > 400,000 tons per year Applications: High‑carbon, alloy, bearing, spring, cold‑heading steels Rolls & Guides’ Shop: Fully equipped workshops Spare Parts: L ...
Danfoss Optyma™ PLUS condensing unit Type: OP-LPHC271NTP00E 114x3480 Compressor type: NTZ271A4LR1B Cooling capacity for R404A: 14.24 kW at -10°C/40°C, 10.97 kW at -25°C/40°C, 8.24 kW at -30°C/40°C Dimensions: 1600 x 540 x 1800 mm Weight: 325 kg Number of fans: 2 x 600 mm Stock: 1 piece Stock number: AG 178 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.
Manufacturer: Dannfoss, Ersatzteil aus Maschine: Frequenzumrichter, Type: VTL 3006 175H7264, Menge: 3, Kw output: 7,2 / 9,2 kVA, FREITEXT1: 10/13 A,
Stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Danfoss, solenoid valve coil unused in original packaging -Type: BB230AS -Voltage: 230 V/10 W -Price: per piece -Number: 21 piece -Dimension box: 65/55/H75 mm -Weight: 0.3 kg/piece
Description Danfoss hydraulic motor OMR 315 from spare parts warehouse, no disassembly
