dan used for sale

pressure: 1000 kg workpiece length - max.: 6500 mm weight of the machine ca.: 600 t dimensions of the machine ca.: 120x30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: Danfoss Type: SZ100S4VC Performer New Vacuum: - Pressure: 25bar - Temperature max: 54C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 32bar - Temperature max: 65C - Temperature min.: -35C - Volume: 3.25 litres

Te Koop: Danfoss 3480-3490 Freqentieregelaar VLT. Type: 3003 175H1011. 380-415 v.

This Danobat Danumeric 650 Lathe was manufactured in the year 1989. It is equipped with a Fagor 8025 T control unit and has 2 axis. The machine has a spindle speed of 25-4500 rpm.

U-tronic maximum speed: 250 RPM

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

Make: Danfoss Type: SZ175S4RC Performer 3 pieces New Vacuum: - Pressure: 25bar - Temperature max: 63C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 31.9bar - Temperature max: 65C - Temperature min.: -35C - Volume: 2 litres

Universal grinder. Distance between centers: 1600mm. Centre height: 175mm. Maximum grinding diameter: 348mm. Wheel diameter: 500mm. Wheel head: 10hp. Weight: 4700Kgs. DRO Fagor. CE protections.

Semi-automatic short-threaded cutting machine for the production of external and internal thread Gr. via cross slide: 160 mm Gr. via cross slide guide: 240 mm tip wiete 250 mm nSpindle=180-2240 rpm spindle bore: 61 mm gr. threaded length/deep 100/6 mm

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Danger Type : WM 52 plates YOM : ca. 1980 electrical : 380V 3Ph. ca. 3 KW heating : natural gas or propane waffle sheet : 460x290 mm, deep karee different : automatic sheet take off with wafer cooler We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked

Frequency inverters of Danfoss Type: HVAC-drive VLT6000 Power: 5.5 kW Protection class: IP54 Frequency converter is fully functional and can be visited at any time. Shipping is also possible!

Te Coop: Danfoss Druk druk transmitter MBS 3000 0-6 bar

Danfoss OMR 160 new, Danfoss OMS 125 used, Danfoss OMV 315 used, Danfoss OMV 400 as new

weight max.: 1600 kg Drive: Diesel motor: Deutz weight: 13,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 1250 mm Turning length: 0 mm Spindle bore: 0 mm Motor power: 0 HP/kW CNC Brand: Siemens Rail track gauge   1,435 mm Max. wheel tread Ø    1,250 mm Min. wheel tread  Ø    650 mm in work                                              : 09/2016 Rail Profile                                        : S54 ( retractable rail ) UIC tread patterns                            : 80- 145 mm Max. wheel flange height                 : 45 mm Max. load per wheel            &n ...

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

Code 61062 Description Hydr. Surface grinding machine Make DANOBAT Type RTS - 1600 Machine No. 16 220 Manufacturing date 1975 Table size 1800 x 550 mm Grinding dimensions L x W x H 1600 x 600 x 650 mm Magnetic plate size L x W 1600 x 550 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 750 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 15 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 10.000 kgs Total power 20 kW – 380 Volt Accessoiries Electro magnetic plate 1600 x 550 mm from Tecnomagnete Coolant Vertical grinding spindel Condition Machine is in good condition

Code 81199 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 504 Manufacturing date 1987 Table size 1400 x 450 mm Grinding dimensions L x W x H 1200 x 600 x 450 mm Magnetic plate size L x W 1200 x 450 mm Table speed movement 1 - 30 m/min. Max. distance table surface – centre grinding wheel 675 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1200 rpm Spindle power 7,5 kW Grinding wheel size Ø 450 x 50 ( 100 ) x Ø 127 mm Weight 6000 kgs Size of machine 3250 x 1850 x 2600 mm Total power 19 kW – 380 Volt Accessoiries Electro magnetic plate 1200 x 450 mm from Tecnomagnete Coolant Pendel control Condition Machine is in normal condition

Code 171305 Description CNC surface grinding machine Make DANOBAT Model PSG - 1000 Serial No. 30102 A Control Fanuc 210i - M Year 2001 Tablesize 1000 x 500 mm Grinding surface L x W x H 1000 x 600 x 450 mm Long ( X axes ) 1150 mm Cross ( Z axes ) 500 mm Speed table movement 1 – 30 m/min. Max. distance table – centre grinding wheel 650 mm Max. workpiece weigth 1500 kg Max. table load 1500 kg Magnetical plate size L x W 1000 x 500 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 100 x Ø 127 mm Spindel power 7,5 kW Spindel speed 1500 rpm Motor power 7,5 kW – 380 Volt Total electr.com. 20 kW Total space L x W x H 3950 x 3150 x 2550 mm Weight 5500 kgs Accessoiries Elec. Magneticplate 1000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in g ...

grinding length: 1000 mm grinding width: 600 mm workpiece height: 450 mm Control: Fanuc 210i - M total power requirement: 20 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3950 x 3150 x 2550 mm CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition  ...

weight max.: 1000 kg workpiece length: . mm work piece width: . mm Drive: elektr. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 12 t work piece width: 880 mm total power requirement: 130 kW weight of the machine ca.: 63,3 t incline position of plears upwards 6,5° incline position of plears downwards 12,5° strike-slip fault left 200mm strike-slip fault right 200mm rotary speed of plear 2-30U/min driving speed 2 levels 0-60m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 800 kg workpiece length: . mm work piece width: . mm stroke: 500 mm total power requirement: . kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3x1,6x2 m Electric drive control block is missing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wide belt grinding machine Danckaert E 527 - S 81894 Grinding width 1120 mm Combination unit: contact roller / sanding shoe Carpet needs to be replaced Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Rolling Mill for REBAR and WIRE, cap. 350.000 - 400.000 TPY YOM: 1981 The Mill consists of: • (4) Roughing Mill Stands (1-4) • (4) Intermediate Stands (5-8) • Shear • (4) Intermediate Stands (9-12) • (4) Finishing Stands (13-16) • Split Rebar (A)/Bar (B)/ Wire (C) • Shear • (6) Finishing Stands Rebar (17-22) • Shear • Coolant Bed • (8) Finishing Stands Wire (17-24) Upgrades have been done.

Ground precision ball screw, D40 mm, 1200 mm, Danaher, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Sp.Nr. 812250/8, D40 mm, 1200 mm, Z-Nr.: 42.20101.01.3171.00, Fa. Danaher Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 1020 mm Length of ball screw nut 145 mm, Max. total stroke 875 mm, Total length of the spindle 1200 mm Diameter for coupling with motor 30 mm Diameter bearing seat A 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a func ...

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

Apparatus interior de interiores, Equilibrador de muelas, Equilibrador de muelas, Plato autocentrante de 3 garras y diamantador / Apparatus interior balancer wheels, 3-jaw chuck plate and dresser, Width of the grinding wheel: 50 mm, Ø max. to rectifying: 250 mm, Distance between points: 800 mm, Height of points: 135 mm, Maximum length to grinding: 800 mm, Total power: 12.2 hp, High: 1460 mm, No manufacturing: 494, Long: 2670 mm, Max to rectifying: 250 mm, Included accessories: Grinding wheel, 3-claw self-aligning plate and diamond / Apparatus interior balancer wheels, 3-jaw chuck plate and dresser, Weight: 2875 Kg, Width: 1420 mm, Specification: universal

Key data: 4000 Fagor, 1100 8055, 1000

Grinding length: 4000 mm Grinding width: 1100 mm Grinding height: 1000 mm Wheel diameter: 500 mm Spindle power: 20 kW CNC Brand: Fagor CNC Model: 8055 X – Travel:              4.000mm Y – Travel:              1.100mm Z – Travel:              1.000mm Table Length:            4.000mm Table Width:             1.000mm Table load:              5.000Kg Feed rate X-Axis:        30.000mm/min. Feed rate Z-Axis:        5.000mm/min. Grinding stone dimensions:500 x 100 x 203 mm Power:                   20kW Length:                  11.000 mm   ...

Grinding length: 4000 mm Grinding width: 1100 mm Grinding height: 1000 mm Wheel diameter: 500 mm CNC Brand: Fagor CNC Model: 8055 MACH-id    5133 MAKE        Danobat Spain TYPE           RT 4000 SP YOP              1987 / 2019 SPECIFICATIONS Control       Fagor 8055 Cylindical / Surface / Other        Surface grinder X - Travel           4000 mm Y - Travel           1100 mm Z - Travel            1000 mm Electro magnetic table        4000 x 1000 mm Grinding wheel size            500 x 100 x 203,5 mm kW power on spindle          20 kW Speeds / ranges    &nbs ...

Grinding length: 4000 mm Grinding width: 1100 mm Grinding height: 1000 mm Wheel diameter: 4000 mm Spindle power: 30 kW CNC Brand: Fagor CNC Model: 8055 MACH-id   411 MAKE       DANOBAT Spain TYPE         RP 4000 YEAR       1987 / 20.. SPECIFICATIONS Controll      Fagor 8055 Cylindical / Surface / Other     Surface Grinding length       4000 mm X - Travel         1100 mm Y - Travel        1000 mm Electro magnetic table      4000 x 1000 mm Grinding wheel size      500 mm kW power on spindle      30 kW DIMENSIONS Length     11000 mm Width       4100 mm Height      4100 mm

Manufacturer: Danfoss Type: VLT3004 175H1012 079207G311 Electric power: 3,6 kW

weight max.: 2500 kg workpiece length: . mm work piece width: . mm stroke: . mm total power requirement: 45 kW weight of the machine ca.: 15,7 t dimensions of the machine ca.: 4,8x2,34x3,65 m Electric drive control block is missing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 250 Kg

Grinding length: 1500 mm Grinding width: 500 mm Grinding height: 350 mm Wheel diameter: 10 mm Spindle power: 20 kW CNC Brand: Fanuc CNC Model: Fanuc 210-M X - Travel:   1500mm Y - Travel:   500mm Z - Travel:   350mm Table Length: 1500mm Table Width:  500mm Table load:   700 Power:        20kW Speeds:       2800Rpm Coolant system:Yes Length:       6000mm Width:        2400mm Height:       2200mm Weight:       7000kg

New and unused! Stock goods, was never assembled. Danfoss VLT Aqua Drive 75kW T/C: FC-202P75KT4E20H1TG P/N: 131G5722 S/N: 010411G216 75kW(400V) / 100HP(460V) IN: 3x380-480V 50/60Hz 133/118A OUT: 3x0-Vin 0-590Hz 147/130A Chassis/ IP20 Tamb. 45°C/113F SW: 02.64 A:05:20 - Lng 1 131G5722010411G216 All information without guarantee. Shipping possible at an additional cost.

capacity 250 kg

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts

CNC Portal Grinder DANOBAT Year 2010 Table size 8000 x 2500mm X1 table travel 8600mm Grinding width 2650mm Passage between columns 3100mm Grinding height 1400mm Max table load 32000kg Y2 head cross travel 3520mm W2 head vertical travel 1570mm A1 Head angular stroke +/- 110° Angle head indexing 2,5° Wheel size dia 610 x 100 x dia 304,8mm Minimum wheel size dia 450mm Wheel motor power 35kW C2 Automatic wheel changer 2 positions V2 Universal wheel dressing unit 260mm U2 Universal wheel dressing unit 120mm CNC SIEMENS 840 D MARPOSS measuring system Full working area cover with automatic opening on one side for piece loading Machine weight 95000kg Machine plant dimensions with cover 21440 x 6000mm CE Filtering unit with conveyor Set of wheels Flanges Refrigerating unit Installed and working Perfect conditions 4000 working hours Excellent condition

stroke: . mm weight max.: 300 kg speed: . m/min total power requirement: . kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: . m Load capacity max 30 KN Load moment 50 KNm Tilt moment 93 KNm The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop. You want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VLT 5102, Product no.: 178B4820, Serial no.: 011030G096 (Year of construction KW09 / 2006) Type Code: VLT5102 P-T5-C20-EB-R3-DL-F10-C0 - Protection class IP20 - Rated power 75KW / 90KW - Voltage range 380-500V - Integrated brake module + ext. 24VDC supply - Built-in Profibus option

VLT 5062, Product no.: 178B1428, Serial no.: 011330G096 (Year of construction KW09 / 2006) Type Code: VLT5062 P-T5-C20-EB-R3-DL-F10-C0 - Protection class IP20 - Rated power 45KW / 55KW - Voltage range 380-500V - Integrated brake module + ext. 24VDC supply - Built-in Profibus option

CNC Guide Path Grinding Machine / CNC Portal Grinding Machine Danobat SGU 80 Year of construction 2010 Siemens 840D CNC Control Table size 8,000 x 2,500 mm Table load max. 32,000 kg Table longitudinal travel X 8,600 mm Grinding support cross travel Y 3,520 mm Distance between stands 3,100 mm Grinding width 2,650 mm Grinding support vertical travel Z 1,570 mm Grinding height 1,400 mm Head swivel range +/- 110° (indexing 2.5°) Grinding wheel drive power 35 kW Head changer for 2 grinding heads Excellent condition offer number V-6750 This is a rare machine and offers massive savings compared to buying a new machine.